In order to obtain multiwalled carbon nanotubes (MWNTs)/epoxy composites with good mechanical properties at cryogenic temperature, two methods were adopted to modify MWNTs. MWNTs were first treated by acid mixture (oxidized MWNTs, O-MWNTs) and then maleic anhydride (MA) and isophorone diisocyanate (IPDI) grafting was carried out. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses proved the effectiveness of acid mixture treatment and confirmed the grafting reaction of MA and IPDI with MWNTs. High-resolution transmission electron microscopy analysis indicates that MA and IPDI chain were grafted onto the MWNTs surface, creating a rigid covalent bond between MWNTs and epoxy resin and forming a thin layer. The tensile strength, Young’s modulus, and impact strength of composites at liquid nitrogen temperature (77 K) are all enhanced by the addition of MWNTs. Results of dynamic mechanical analysis indicated that introducing a small amount of functionalized MWNTs to epoxy can enhance their storage modulus at 77 K and glass transition temperature of composites. The results indicated that surface-modified MWNTs can be effectively utilized to improve the properties of epoxy-based composites at cryogenic temperature.
ChengQFWangJPWenJJ. Carbon nanotube/epoxy composites fabricated by resin transfer molding. Carbon2010; 48: 260–166.
4.
YuMFLourieODyerMJ. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science2000; 287: 637–640.
5.
WangFLiSQWangJW. Effect of functionalized multi-walled carbon nanotubes on the curing behavior and thermal stability of epoxy resin. High Perform Polym2012; 24: 97–104.
6.
MitchellCABahrJLArepalliS. Dispersion of carbon nanotubes in polystyrene. Macromolecules2002; 35(23): 8825–8830.
7.
MallakpourSZadehnazariA. Functionalization of multiwalled carbon nanotubes with S-valine amino acid and its reinforcement on amino acid-containing poly(amide-imide) bionanocomposites. High Perform Polym2013; 25: 966–979.
8.
Mohd ZulfliNHAbu BakarAChowWS. Mechanical and thermal properties improvement of nano calcium carbonate-filled epoxy/glass fiber composite laminates. High Perform Polym2014; 26: 223–229.
CooperCARavichDLipsD. Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix. Compos Sci Technol2002; 62: 1105–1112.
11.
XuXJThweMMShearwoodC. Mechanical properties and interfacial characteristics of carbon-nanotube-reinforced epoxy thin films. Appl Phys Lett2002; 81: 2833–2835.
12.
YangJPChenZKFengQP. Cryogenic mechanical behaviors of carbon nanotube reinforced composites based on modified epoxy by poly(ethersulfone). Compos B2012; 43: 22–26.
13.
ChenZKYangJPNiQQ. Reinforcement of epoxy resins with multi-walled carbon nanotubes for enhancing cryogenic mechanical properties. Polymer2009; 50: 4753–4759.
14.
ZhuJKimJPengH. Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization. Nano Lett2003; 3: 1107–1113.
15.
ZhangYHLiuXZhuM. Dielectric properties of carbon-nanotube/amino-functionalized poly(arylene ether ketone) composites. High Perform Polym2012; 24: 173–179.
16.
GengHZRosenRZhengB. Fabrication and properties of composites of poly(ethylene oxide) and functionalized carbon nanotubes. Adv Mater2002; 14: 1387–1390.
17.
WangMPramondaKPGohSH. Enhancement of the mechanical properties of poly(styrene-co-acrylonitrile) with poly(methyl methacrylate)-grafted multiwalled carbon nanotubes. Polymer2005; 46: 11510–11516.
18.
PaivaMCZhouBFernandoKA. Mechanical and morphological characterization of polymer–carbon nanocomposites from functionalized carbon nanotubes. Carbon2004; 42: 2849–2854.
19.
GunasekaranSGDevarajuSAlagarM. Studies on synthesis and characterization of multi-walled carbon nanotube-reinforced polyimide nanocomposites based on a siloxane-modified anhydride. High Perform Polym2014; 26: 43–51.
20.
WangSRLiangZYGonnetP. Effect of nanotube functionalization on the coefficient of thermal expansion of nanocomposites. Adv Funct Mater2007; 17(1): 87–92.
21.
LuCHuXNHeYX. Triple percolation behavior and positive temperature coefficient effect of conductive polymer composites with especial interface morphology. Polym Bull2012; 68: 2071–2087.
22.
HeYXMaJZZhangL. Preparation and characterization of graft copolymer EVA-g-PU. Polym Plast Technol Eng2008; 47: 1214–1219.
23.
KathiJRheeKY. Surface modification of multi-walled carbon nanotubes using 3-aminopropyltriethoxysilane. J Mater Sci2008; 43: 33–37.
24.
LeeJHRheeKYParkSJ. The tensile and thermal properties of modified CNT-reinforced basalt/epoxy composites. Mater Sci Eng A2010; 527: 6838–6843.
25.
LachmanNWagnerHD. Correlation between interfacial molecular structure and mechanics in CNT/epoxy nano-composites. Compos A2010; 41: 1093–1098.
26.
WangHHChenJC. Toughening of epoxy resin by functional-terminated polyurethanes and/or semicrystalline polymer powders. J Appl Polym Sci2001; 82: 2903–2912.
27.
KumarTPSivasankarB. Poly(ether urethane) flexible cyanate ester resins: synthesis, characterization, and performance in commercial epoxy and polyurethane applications. J Appl Polym Sci2008; 107: 193–202.
28.
OkpalugoTITPapakonstantinouPMurphyH. High resolution XPS characterization of chemical functionalized MWCNTs and SWCNTs. Carbon2005; 43: 153–161.
29.
PapagelisKKalyvaMTasisD. Covalently functionalized carbon nanotubes as macroinitiators for radical polymerization. Phys Stat Sol2007; 244(11): 4046–4050.
30.
ZhangGSunSYangD. The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment. Carbon2008; 46(2): 196–205.
31.
XiaWWangYBergsträßerR. Surface characterization of oxygen-functionalized multi-walled carbon nanotubes by high-resolution X-ray photoelectron spectroscopy and temperature-programmed desorption. Appl Surf Sci2007; 254(1): 247–250.
32.
FuSYFengXQLaukeB. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Compos B2008; 39: 933–961.
33.
FuSYLaukeB. The elastic modulus of misaligned short fibre reinforced polymers. Compos Sci Technol1998; 58: 389–400.
34.
FuSYLaukeB. An analytical characterization of the anisotropy of the elastic modulus of misaligned short-fiber-reinforced polymers. Compos Sci Technol1998; 58: 1961–1972.
35.
LeeJHRheeKYParkSJ. Silane modification of carbon nanotubes and its effects on the material properties of carbon/CNT/epoxy three-phase composites. Compos A2011; 42: 478–483.
