A candid approach to analyze the prospects of organic–inorganic nanocomposites as polyelectrolytes has been presented in this communication. Structurally modified aromatic sulfone polymer, polysulfone, was successfully prepared through modification with trimethyl silyl chlorosulfonate, which was confirmed from Fourier transform infrared spectrographs. Different classes of nanofillers like layered silicates and inorganic oxides were reinforced in the modified macromolecular system using solvent casting technique. A comparative study was performed to evaluate the effectiveness of filled polyelectrolyte membranes in a direct methanol fuel cell operated at 60°C with 1.0 M methanol feed. Atomic force micrographs revealed the phase morphology, responsible for this behaviour. The variation in ion transfer behavior as a function of structural modification and filler composition was also conducted. Furthermore, supportive information for these characterizations were derived from morphological (x-ray diffractometry), thermal (thermogravimetric analysis), and liquid uptake studies.
SopianKDaudW. Challenges and future developments in proton exchange membrane fuel cells. Renew Energ2006; 31: 719–727.
2.
BoseSKuilaTNguyenTXH. Polymer membranes for high temperature proton exchange membrane fuel cell: recent advances and challenges. Prog Polym Sci2011; 36: 813–843.
3.
AhmedDSungH. Design of a deflected membrane electrode assembly for PEMFCs. Int J Heat Mass Tran2008; 51: 5443–5453.
LinHTangTHuC. Poly(benzimidazole)/silica-ethyl-phosphoric acid hybrid membranes for proton exchange membrane fuel cells. J Power Sourc2012; 201: 72–80.
6.
LobatoJCañizaresPRodrigoMA. Enhancement of the fuel cell performance of a high temperature proton exchange membrane fuel cell running with titanium composite polybenzimidazole-based membranes. J Power Sourc2011; 196: 8265–8271.
7.
UnnikrishnanLMohantySNayakSK. Sulfonated polysulfone/TiO2 nanocomposite membranes for fuel cell application. Int J Plast Tech2011; 15: 1–20.
UnnikrishnanLPrasadMMohantyS. Polysulfone/C30B nanocomposite membranes for fuel cell applications: effect of various sulfonating agents. Polym Plast Tech Eng2012; 51: 568–577.
10.
KreuerKD. Proton conductivity: materials and applications. Chem Mater1996; 8: 610–641.
11.
HogarthWHJDiniz da CostaJCLuGQ. Solid acid membranes for high temperature (>140°C) proton exchange membrane fuel cells. J Power Sourc2005; 142: 223–237.
12.
TuckermanMEMarxDParrinelloM. The nature and transport mechanism of hydrated hydroxide ions in aqueous solution. Nature2002; 417: 925–929.
13.
HicknerMAPivovarBS. The chemical and structural nature of proton exchange membrane fuel cell properties. Fuel Cells2005; 5: 213–229.
14.
AlbertiGNarducciRSganappaM. Effects of hydrothermal/thermal treatments on the water-uptake of Nafion membranes and relations with changes of conformation, counter-elastic force and tensile modulus of the matrix. J Power Sourc2008; 178: 575–583.
ZuoZFuYManthiramA. Novel blend membranes based on acid–base interactions for fuel cells. Polymers2012; 4: 1627–1644.
17.
PaulRPaddisonSJ. Proton friction and diffusion coefficients in hydrated polymer electrolyte membranes: computations with a non-equilibrium statistical mechanical model. J Chem Phys2001; 115: 7762–7771.
18.
WeberAZBreslauJBRMillerIF. A hydrodynamic model for electroosmosis. Ind Eng Chem Fundam1971; 10: 554–565.
19.
De GrotthussCJT. Sur la décomposition de l'eau et des corps qu'elle tient en dissolution à l'aide de l'électricité galvanique. Ann Chim(Paris)1806; 58: 54–73.
20.
KreuerKDPaddisonSJSpohrE. Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology. Chem Rev2004; 104: 4637–4678.
21.
DelucaNWElabdYA. Polymer electrolyte membranes for the direct methanol fuel cell: a review. J Polym Sci B: Polym Phys2006; 44: 2201–2213.
22.
QiaoJHamayaTOkadaT. New highly proton conductive polymer membranes poly(vinyl alcohol)/2-acrylamido-2-methyl-1-propanesulfonic acid (PVA-PAMPS). J Mater Chem2005; 15: 4414–4423.
23.
ShaoZGXuHLiM. Hybrid Nafion–inorganic oxides membrane doped with heteropolyacids for high temperature operation of proton exchange membrane fuel cell. Solid State Ionics2006; 177: 779–785.
24.
WoongJCVenkataramaniSKimSC. Modification of Nafion membrane using poly(4-vinyl pyridine) for direct methanol fuel cell. Polym Int2006; 55: 491–499.
25.
KawagutiCADahmoucheKGomesAS. Nanostructure and properties of proton-conducting sulfonated poly(ether ether ketone) (SPEEK) and zirconia–SPEEK hybrid membranes for direct alcohol fuel cells: effect of the nature of swelling solvent and incorporation of heteropolyacid. Polym Int2012; 61: 82–92.
26.
LiXZhaoCLuH. Direct synthesis of SPEKKs proton exchange membranes for fuel cell application. Polymer2005; 46: 5820–5827.
27.
ZhangSYuanXZHiesgenR. Effect of open circuit voltage on degradation of a short proton exchange membrane fuel cell stack with bilayer membrane configurations. J Power Sourc2012; 205: 290–300.
28.
HiesgenRHelmlySGalmI. Microscopic analysis of current and mechanical properties of Nafion® studied by atomic force microscopy. Membranes2012; 2: 783–803.
29.
NeburchilovVMartinJWangH. A review of polymer electrolyte membranes for direct methanol fuel cells. J Power Sourc2007; 169: 221–238.
30.
WuDWuLWooJJ. A simple heat treatment to prepare covalently crosslinked membranes from sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) for application in fuel cells. J Membr Sci2009; 348: 167–173.
31.
VonaMLDSgrecciaETamilvananM. High ionic exchange capacity polyphenylsulfone (SPPSU) and polyethersulfone (SPES) crosslinked by annealing treatment: thermal stability, hydration level and mechanical properties. J Membr Sci2010; 354: 134–141.
32.
KumarBFellnerJP. Polymer–ceramic composite protonic conductors. J Power Sourc2003; 123: 132–136.
33.
LufranoFGattoIStaitiP. Sulfonated polysulfone ionomer membranes for fuel cells. Solid State Ionics2001; 145: 47–51.
34.
O’GaraJFWilliamsDJMacnightWJ. Random homogeneous sodium sulfonate polysulfone ionomers: preparation, characterization, and blend studies. J Polym Sci B: Polym Phys1987; 25: 1519–1536.
35.
RobertsonGPMikhailenkoSDWangK. Casting solvent interactions with sulfonated poly(ether ether ketone) during proton exchange membrane fabrication. J Membr Sci2003; 219: 113–121.
