The thermo-oxidative stability and molecular weight were determined for polyimide and polyamide-imide thin films, deposited by resonant infrared laser ablation (RIR-LA). RIR-LA films were deposited at various wavelengths and compared with the traditional solution-cast films using thermogravimetric analysis. The RIR-LA films showed slightly lower oxidation temperatures, but the initial weight loss temperatures were greater. Since molecular weight is directly correlated with the physical and mechanical properties of the polymer, multiangle laser light scattering was employed to ascertain the weight-average molecular weight of the polymers before and after LA. The RIR-LA films exhibited slightly reduced weight-average molecular weight. This degradation has three possible sources: bond scission during LA, reduced solvent transfer leading to lower chain extension and hydrolysis caused by the presence of atmospheric water.
SrinivasanRHallRRLoehleWDWilsonWDAlbeeDC. Chemical transformations of the polyimide kapton brought about by ultraviolet laser radiation. J Appl Phys1995; 78: 4881–4887.
6.
BubbDMHorwitzJSCallahanJHMcGillRAHouserEJChriseyDB. Resonant infrared pulsed-laser deposition of polymer films using a free-electron laser. Vac Sci Technol A2001; 19: 2698–2702.
7.
BubbDMPapantonakisMRToftmannBHorwitzJSMcGillRAChriseyDB. Effect of ablation parameters on infrared pulsed laser deposition of poly(ethylene glycol) films. J Appl Phys2002; 91: 9809–9814.
8.
PapantonakisMRHaglundRF. Pulsed laser deposition of polymers at high vibrational excitation density: the case of poly(tetrafluoroethylene). J Appl Phys A2004; 79: 1687–1694.
9.
WallachML. Aromatic poly(amic acids): fundamental structural studies. J Polym Sci Part A-2: Polym Phys1967; 5: 653–662.
10.
CottsPM, Polyimides: synthesis, characterization, and applications. Vol I, New York, NY: Plenum Press, 1984.
11.
DygertNLGiesAPSchriverKEHaglundRF. Deposition of polyimide precursor by resonant infrared laser ablation. J Appl Phys A2007; 89: 481–487.
12.
DinetzSFBirdEJWagnerRLFountainAW. A comparative study of the gaseous products generated by the thermal and ultra-violet laser pyrolyses of the polyimide PMDA-ODA. J Anal Appl Pyrol2002; 63: 241–249.
13.
EdwardsGSEvertsonDGabellaWGrantRKingTLKozubJ. Free-electron lasers: reliability, performance, and beam delivery. IEEE Sel Top Quant Electron1996; 2: 810–817.
14.
EdwardsGSAllenSJHaglundRFJrNemanichRJRedlichBSimonJD. Applications of free-electron lasers in the biological and material sciences. Photochem Photobiol2005; 81: 711–735.
15.
ZimmBJ. The scattering of light and the radial distribution function of high polymer solutions. J Chem Phys1948; 16: 1093–1099.
16.
ZimmBJ. Apparatus and methods for measurements and interpretation of the angular variation of light scattering; preliminary results on polystyrene solutions. J Chem Phys1948; 16: 1099–1117.
CottsPMVolksenWFerlineSJ. Equilibration of mixtures of polyamic acids studied using size-exclusion chromatography and light-scattering. J Poly Sci B1992; 30: 373–379.
22.
GiesAPNonidezWKAnthamattenMCookRC. A matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy study of the imidization of vapor-deposited ODA-PMDA poly(amic acid). Macromolecules2004; 37: 5923–5929.
23.
ChuB.Laser Light Scattering: Basic Principles and Practice. New York, NY: Academic Press, 1991.
24.
BreknerMJFegerC. Curing studies of a polyimide precursor. J Poly Sci A1987; 25: 2005–2020.
25.
RogersJANelsonKA. Impulsive stimulated thermal scattering studies of thermally induced cure in thin films of PMDA/ODA. J Poly Sci B1996; 34: 861–872.
26.
OrtelliEEGeigerFLippertTWokaunA. Pyrolysis of Kapton® in air: an in situ DRIFT study. Appl Spect2001; 55: 412–419.
