Studies on the cycling,processing and programming of an industrially applicable shape memory polymer Tecoflex® (or TFX EG 72D)

Abstract

The present investigations were undertaken to find out whether and how often cycling, processing and programming can be repeated, whether repeated programming affects the one way effect and how much irreversible strain the shape memory polymeric material accumulates at a particular temperature. The effect was investigated in dependence of different stress levels, and the effect of both recovery temperature and recovery time was considered. As a model material the commercially and industrially applicable amorphous shape memory polymer Tecoflex® was examined and subjected to 50 programming cycles. Tecoflex® is characterized by a glass transition temperature, Tg, of 74 °C, above which it looses all its strength. During tensile testing at 20 °C (T < Tg), stresses a steady increase to 26 MPa as strains approached the rupture strain of 25%. It is observed that at 60 °C (T < Tg, but near Tg) the material can be strained to more than 2500% before rupture occurs while stresses slowly increase to values less than 0.3 MPa. It turns out that programming, cooling, unloading and heating to trigger the one way effect causes an increase of irreversible strain that is associated with a corresponding decrease of the intensity of the one way effect during the first thermomechanical cycles.