Hybrid polyimide films based on barium and titanium oxides were obtained by sol-gel technique using a poly(amic acid) containing nitrile groups and a soluble precursor of barium and titanium oxides. The poly(amic acid) was synthesized by solution polycondensation reaction of 4,4'-oxydiphthalic anhydride with 2,6-bis(3-aminophenoxy)benzonitrile. Hybrid polymer films were investigated by atomic force microscopy, scanning electron microscopy, thermogravimetric analysis and dynamic mechanical analyses. The nanoactuation properties of some hybrid polyimide films were also investigated.
Sato, M. ( 1997). Polyimides. In: Olabisi, O. (ed.), Handbook of Thermoplastics, Marcel Dekker, New York, 665-699.
3.
Wilson, D. ( 1990). Polyimides as Resin Matrices for Advanced Composites . In: Wilson, D., Stenzenberger, H.D., Hergenrother, P.M. (eds), Polyimides, Chapman and Hall , New York, 187-226.
4.
Li, L., Kikuchi, R., Kakimoto, M.A., Jikei, M. and Takahashi, A. ( 2005). Synthesis and Characterization of New Polyimides containing Nitrile Groups, High Perform. Polym., 17: 135-147.
5.
Saxena, A., Sadhana, R., Rao, V.L., Kanakavel, M. and Ninan, K.N. ( 2003). Synthesis and Properties of Polyarylene Ether Nitrile Copolymers, Polym. Bull., 50: 219-226.
6.
Keller, T.M. ( 1988). Phthalonitrile-based High Temperature Resin, J. Polym. Sci.: Part A: Polym. Chem., 26: 3199-3212.
Ounaies, Z., Park, C., Harrison, J.S., Smith, J.G. and Hinkley, J.A. ( 1999). In: Barr-Cohen, Y. (ed.), Proceedings of Society for Photo-Optical Instrumentation Engineers, 3669, 171.
9.
Park, C., Ounaies, Z., Wise, K.E. and Harrison, J.S. ( 2004). In situ Poling and Imidization of Amorphous Piezoelectric Polyimides, Polymer, 45: 5417-5425.
10.
Young, J.A., Farmer, B.L. and Hinkley, J.A. ( 1999). Molecular Modeling of the Poling of Piezoelectric Polyimides , Polymer, 40: 2787-2795.
11.
Musto, P. , Ragosta, G., Scarinzi, G. and Mascia, L. (2006). Structure-Properties Correlation in Polyimide/silica Hybrids, High Perform. Polym. , 18, 799-816.
Chang, C.C. and Chen, W.C. (2001). High-refractive-index Thin Films Prepared from Aminoalkoxysilanecapped Pyromellitic Dianhydride-titania Hybrid Materials, J. Polym. Sci.: Part A, Polym. Chem., 39: 3419-3427.
14.
Roh, H.G., Kim, G.H. and Kim, Y.H. (2006). Effect of Curing Conditions on the Fabrication of Zn-oxide Nanoparticles Dispersed in a Polyimide, High Perform. Polym., 18: 739-747.
15.
Wagner, S. , Dai, H., Stapleton, R.A., Illingsworth , M.L. and Siochi, E.J. (2006). Pendent Polyimides using Mellitic Acid Dianhydride. I. An Atomic Oxygen-resistant, Pendent 4,4'-ODA/PMDA/MADA Co-polyimide Containing Zirconium, High Perform. Polym., 18: 399-419.
16.
Zhao, L., Li, L., Tian, J., Zhuang, J. and Li, S. ( 2004). Synthesis and Characterization of Bismaleimide- Polyetherimide-titania Hybrid, Composites: Part A, 35: 1217-1224.
17.
Tong, D., Li, Y. and Ding, M. ( 2002). Preparation and Properties of Polyimide Films Codoped with Barium and Titanium Oxides, J. Appl. Polym. Sci., 83: 1810-1816.
18.
Hamciuc, E., Bruma, M., Hamciuc, C. and Lungu, R. (2006). Aromatic Polyimides Containing Polar Nitrile Groups, Rev. Roum. Chem., 51: 765-771.
19.
Rancourt, J.D. and Taylor, L.T. (1987). Preparation and Properties of Surface-conductive Polyimide Films via in situ Codeposition of Metal Salts , Macromolecules, 20: 790-795.
20.
Cornelius, C., Hibshman, C. and Marand, E. (2001). Hybrid Organic-inorganic Membranes, Separation and Purification Technol., 25: 181-193.
21.
Lin, B.P., Pan, Y., Qian, Y. and Yuan, C.W. (2004). Comparative Study of Silicon-containing Polyimides from Different Oxydianilines, J. Appl. Polym. Sci., 94: 2363-2367.
22.
Hamciuc, E., Hamciuc, C., Ignat, M. and Zarnescu, G. (2009). Aromatic Poly(ether imide)s containing Nitrile Groups, High Perform. Polym., 21: 205-218.
23.
Hamciuc, E., Hamciuc, C., Cazacu, M., Ignat, M. and Zarnescu, G. (2009). Polyimide Polydimethylsiloxane Copolymers containing Nitrile Groups, Eur. Polym. J., 45: 182-190.
