Solid-state microwave synthesis was found to give a simple, rapid and economical route to prepare different kinds of materials. In this investigation, a new method for solid-state polymerization reaction of 4-phenylurazole (PHU ) and 4-(4-methoxyphenyl)urazole (MPU) with different diisocyanates was developed under microwave irradiation. The reaction of PHU and MPU with hexamethylene diisocyanate, isophorone diisocyanate, and tolulyene-2,4-diisocyanate were performed under solid-state conditions in the presence or absence of dibutyltin dilaurate as a catalyst. The resulting polyureas showed good yields and moderate inherent viscosities ranging of 0.20 to 0.34 dL g-1 in N,N-dimethylformamide at 30 °C. All of the aforementioned polymers were characterized by 1 H-NMR, FT-IR spectroscopy and thermogravimetric analysis. This method was compared with solid-state polymerization under high temperature conditions and also with the solution polymerization reaction in N,N-dimethylacetamide. Under microwave-assisted, solid-state conditions, higher yields and inherent viscosities were obtained. In addition in this method we do not need to use any solvents and the polymerization reaction can be classified as a green, cost-effective and environmentally friendly method.
Gross, S.M. , Roberts, G.W., Kiserow, D.J. and Desimone J.M. (2001). Synthesis of High Molecular Weight Polycarbonate by Solid-State Polymerization, Macromolecules , 34: 3916-3920.
2.
Ma, Y. , Agarwal, U.S., Sikkema, D.J. and Lemstra, P.J. (2003). Solid-State Polymerization of PET: Influence of Nitrogen Sweep and High Vacuum, Polymer , 44: 4085-4096.
3.
Gross, S.M. , Flowers, D., Roberts, G., Kiserow, D.J. and Desimone, J.M. (1999). Solid-State Polymerization of Polycarbonates Using Supercritical CO2, Macromolecules , 32: 3167-3169.
4.
Iyer, V.S. , Sehra, J.C. and Ravindranath , K. (1993). Solid-State Polymerization of Poly(ary1 carbonate): A Facile Route to High Molecular Weight Polycarbonates, Macromolecules, 26: 1186-1187.
5.
Mersobian, R.B., Ander, P., Ballantine, D.S. and Dienes, G.J. (1954). Force Constants of Hydrides, J. Chem. Phys., 22: 565-570.
6.
Mersobian, R.B., Ander, P., Ballantine, D.S. and Dienes, G.J. (1956). γ -Ray Initiated Polymerization of Crystalline Monomers, J. Am. Chem. Soc. , 78: 2939-2943.
7.
Vouyiouk, S.N., Karakatsani, E.K. and Papaspyrides , C.D. (2005). Solid State Polymerization, Prog. Polym. Sci., 30: 10-37.
8.
Li, N., Lu, J., Xu, Q. and Xia, X. ( 2007). Synthesis of Optical-Active Azo-Containing Acrylates Using Atom Transfer Radical Polymerization Under Microwave Irradiation, Eur. Polym. J., 43: 4486-4492.
9.
Bousquet-Berthelin, C., Chaumont, D. and Stuerga, D. (2008). Flash Microwave Synthesis of Trevorite Nanoparticles, J. Solid State Chem., 181: 616-622.
10.
Zhao, Z., Li, Z., Xia, Q., Xi, H. and Lin, Y. ( 2008). Fast Synthesis of Temperature-Sensitive Pnipaam Hydrogels by Microwave Irradiation, Eur. Polym. J., 44: 1217-1224.
11.
Liao, L., Zhang, C. and Gong, S. ( 2007). Rapid Synthesis of Poly(trimethylene carbonate) by Microwave-Assisted Ring-Opening Polymerization, Eur. Polym. J., 43: 4289-4296.
Palchik, O., Kerner, R., Zhu, Z. and Gedanken1, A. ( 2000). Preparation of Cu22 x Te and Hg by Using Microwave Heating , J. Solid State Chem., 154: 530-534.
14.
Das, P.B. , Panneerselvam, M. and Rao, K.J. (2003). A Novel Microwave Route for the Preparation of Zrc-Sic Composites, J. Solid State Chem., 173: 196-202.
15.
Robb, G.R. , Harrison, A. and Whittaker, A.G. (2002). Temperature-Resolved, In-Situ Powder X-Ray Diffraction of Silver Iodide under Microwave Irradiation , Phys. Chem. Commun., 37: 135-137.
16.
Jeselnik, M., Varma, R.S., Polanc, S. and Kocevar, M. (2002). Solid-State Synthesis of Heterocyclic Hydrazones Using Microwaves under Catalyst-Free Conditions , Green Chem., 4: 35-38.
17.
Mallakpour, S. and Rafiee, Z. (2007). Microwave-Assisted Clean Synthesis of Aromatic Photoactive Polyamides Derived from 5-(3-Acetoxynaphthoylamino)-Isophthalic Acid and Aromatic Diamines in Ionic Liquid, Eur. Polym. J. , 43: 5017-5025.
18.
Bikiaris, D.N., Achilias, D.S., Giliopoulos, D.J. and Karayannidis , G.P. (2006). Effect of Activated Carbon Black Nanoparticles on Solid State Polymerization of Poly(ethylene terephthalate), Eur. Polym. J., 42: 3190-3201.
19.
Achilias, D.S., Bikiaris, D.N., Karavelidis, V. and Karayannidis , G.P. (2008). Effect of Silica Nanoparticles on Solid State Polymerization of Poly(ethylene terephthalate), Eur. Polym. J., in press.
20.
Park, K.H. , and Cox, L.J. (2002). Solid-Phase Synthesis of 1,2,4-Triazolidine-3,5-Diones, Tetrahedron Lett., 43: 3899-3901.
21.
Mallakpour, S.E., Butler, B.G., Aghabozorg, H. and Palenik, G.J. (1985). Ene Reaction of (S)-(-4αMethylbenzyl)-L,2,4-Triazoline-3,5-Diowniet Propylene. X-Ray Diffraction Analysis of a Single Crystal of the Brominates Adduct, Macromolecules, 18: 342-347.
22.
Ohashi, S. , Leong, K.W., Matyjaszewski , K. and Butler, G.B. (1980). Ene Reaction of Triazolinediones with Alkenes. Structure and Properties of Products, J. Org. Chem., 45: 3467-3471.
23.
Jikihara, T., Matsuya, K., Ohta, H., Suzuki, S. and Wakabayashi. O. (1981). U.S. Patent, 4, 249, 934, Japan. Chemical Abstract ( 1981), 9562219y.
24.
Mallakpour, S. and Zandi, H. (2006). Step-Growth Polymerization of 4-(1-Naphthyl)-1,2,4- Triazolidine-3,5-Dione with Diisocyanates, Polym. Bull.57: 611-621.
25.
Simlot, R. , Izydore, R.A., Wong, O.T. and Hall, A.H. (1994). Hypolipidemic Activity of 4-Substituted 1,2-Diacyl-1,2,4-Triazolidine-3,5-Diones in Rodents, J. Pharm. Sci., 83: 367-371.
26.
Mallakpour, S.E., and Sheikholeslam , B. (1999). Synthesis of Aliphatic Polyamides Containing 4-Phenylurazole Linkages, Polym . Int. 48: 41-46.
27.
Mallakpour, S. and Rafiee, Z. (2006). Synthesis of Photoactive Polyureas Derived from 4-(4-Dimethylaminophenyl) 1,2,4-Triazolidine-3,5-Dione and Diisocyanates, Polym. Bull., 56: 293-303.
28.
Mallakpour, S. and Rezazadeh, S. (2004). Microwave-Induced and High Temperature Solution Polymerization of 4-(4′-T-Butylphenyl)-1,2,4-Triazolidine-3,5-Dione with Diisocyanates, Iranian Polym. J., 13: 29-38.
29.
Mallakpour, S. and Dinari, M. (2007). Molten Salt as a Green Reaction Medium: Synthesis of Polyureas Containing 4-Phenylurazole Moiety in the Main Chain in the Presence of Tetrabutylammonium Bromide as an Ionic Liquid, e-Polymer, 35: 1-8.
30.
Mallakpour, S. and Rafiee, Z. (2007). Tetrabutylammonium Bromide: An Efficient, Green and Novel Media for Polycondensation of 4-(4-Dimethylaminophenyl)-1,2,4-Triazolidine-3,5-Dione with Diisocyanates, Eur. Polym. J., 43: 1510-1515.
31.
Chantarasiri, N., Choprayoon, C., Thussanee, M.P. and Nongnuj, M.N. (2004). Thermally Stable Metal-Containing Polyureas from Hexadentate Schiff Base Metal Complexes and Diisocyanate, Polym . Degrad. Stab., 86: 505-513.
32.
Steuben, K.C. , Barnabeo, A.E., Millich, F. and Carraher, C.E.Interfacial Synthesis, Vol. 2, Dekker, New York1977, Chap. 18.
33.
Mallakpour, S.E. (1992). A New Method for the Oxidation of 4-Phenylurazole to 4-Phenyltriazolinedione, J. Chem. Ed. , 69: 238-241.
34.
Mallakpour, S.E. , Hajipour, A.R. and Raheno, H. (2002). Synthesis and Characterization of New Polyureas Derived from 4-(4-Methoxyphenyl)Urazole, J. Appl. Polym. Sci., 85: 1141-1146.
35.
Mallakpour, S. and Dinari, M. (2008). A Novel and Green Method for Polycondensation Reaction of 4-Substituted Phenylurazoles with Different Diisocyanates Under Solvent-Free Conditions, J. Appl. Polym. Sci., 108: 3462-3466.
36.
Mallakpour, S.E. and Sheikholeslami , B. (1999). Synthesis and Characterization of Novel Polyureas with 4-Phenylurazole Moieties in the Chain, Iranian Polym. J,. 8: 61-66.
