A new semi-fluorinated perfluorocyclobutyl (PFCB) aryl ether containing polymer was prepared in high yield via the condensation of a commercial 4,4'-((1,2,3,3,4,4-hexafluorocyclobutane-1,2-diyl)bis(oxy))bisphenol (bisphenol T) and bis(trifluorovinyloxyether)biphenyl producing transparent, flexible films. The polymer system was structurally characterized using 1H and 19F NMR and exhibited a high degree of thermal stability as determined by thermogravimetric analysis capacity. The sulfonated analogue showed the highest degree of sulfonation at 27% from ion-exchange chromatography, producing a conductivity of 0.011 S cm-1 at 100% relative humidity.
LitsterS., and McLeanG. (2004). PEM Fuel Cell Electrodes, J. Power Sources, 130: 61–76.
2.
MehtaV., and CooperJ.S. (2003). Review and Analysis of PEM Fuel Cell Design and Manufacturing, J. Power Sources, 114: 32–53.
3.
ResnickP.R., and GrotW.G. (1978). Method and Apparatus for Electrolysis of Alkali or Alkaline Earth Metal Halide, U S Patent 4'113,585.
4.
MauritzK.A., and MooreR.B. (2004). State of Understanding of Nafion, Chem. Rev., 104: 4535–4586.
5.
HicknerM.A., GhassemiH., KimY.S., EinslaB.R., and McGrathJ.E. (2004). Alternative Polymer Systems for Proton Exchange Membranes (PEMs), Chem. Rev., 104: 4587–4612.
6.
PerpallM.W., SmithD.W.Jr., DesMarteauD.D., and CreagerS.E. (2006). Alternative Trifluorovinyl Ether Derived Fluoropolymer Membranes and Functionalized Carbon Composite Electrodes for Fuel Cells, J. Macromol. Sci., Part C: Polym. Rev., 46: 297–313.
HarrisonW.L., WangF., MechamJ.B., BhanuV.A., HillM., KimY.S., and McGrathJ.E. (2003). Influence of the Bisphenol Structure on the Direct Synthesis of Sulfonated Poly(arylene ether) Copoly-mers, J. Polym. Sci., Part A. Polym. Chem., 41: 2264–2276.
9.
ThomasB.H., and DesMarteauD.D. (2005). Self-emulsifying Polymerization (SEP) of 3,6-Dioxa-Δ7-4-trifluoromethyl Perfluorooctyl Trifluoromethyl Sulfonimide with Tetrafluoroethylene, J. Fluorine Chem., 126: 1057–1064.
10.
SmithD.W.Jr, ChenS., KumarS., BallatoJ., ShahH., ToppingC., and FoulgerS. (2002). Perfluoro-cyclobutyl Copolymers for Microphotonics, Adv. Mater., 14: 1585–1589.
11.
BabbD.A., ClementK.S., and RicheyW.F. (1999). Polymers from the Thermal [2π + 2π] Cyclodimer-ization of Fluorinated Olefins, In: Fluoropolymers 1: Synthesis, Plenum Press, New York, pp. 25–49.
12.
BabbD.A., ClementK.S., RicheyW.F., and EzzellR.R.Perfluorocyclobutane Aromatic Ether Polymers, In: Polymeric Materials Encyclopedia Vol 7, CRC Press, Boca Raton, pp. 4911–4920.
13.
FordL.A., DesMarteauD.D., and SmithD.W.Jr (2005). Perfluorocyclobutyl (PFCB) Aromatic Poly-ethers: Synthesis and Characterization of New Sulfonimide Containing Monomers and Fluoropolymers, J. Fluorine Chem., 126: 653–660.
14.
IaconoS.T., BudyS.M., EwaldD., and SmithD.W.Jr (2006). Facile Preparation of Fluoroviny-lene Aryl Ether Telechelic Polymers with Dual Functionality for Thermal Chain Extension and Tandem Crosslinking, Chem. Commun., 46: 4844–4846.
15.
CorleyR.S., LalJ., and KaneM.W. (1956). The Properties of Some Fluorinated Vinyl Ethers, J. Am. Chem. Soc., 78: 3489–3493.
16.
WangF.; HicknerM., YuS.K., ZawodzinskiT.A., and McGrathJ.E. (2002). Direct Polymerization of Sulfonated Poly(arylene ether sulfone) Random (Statistical) Copolymers: Candidates for New Proton Exchange Membranes, J. Membr. Sci., 197: 231–242.
