A series of polyurethane membranes were prepared by direct immersion of a polyurethane/dimethylformamide solution into a water bath at different temperatures. Depending on the temperature of the water immersion bath the films exhibited variations in morphology and mechanical properties. As the temperature of the immersion bath was increased, the membrane structure changed from a cellular to a particulate morphology. The properties of polyurethane membrane such as mechanical and gas permeability were measured. It is proposed that the change in membrane structure is due to the variation of polymer chain mobility, influenced by the water bath temperature, during membrane formation
Seymour, R.W. and Cooper, S.L. (1973). Thermal Analysis of Polyurethane Block Polymers. Macromolecules, 6: 4853.
2.
Oprea, S. (2005). Effect of Solvent Interactions on the Properties of Polyurethane Films. High Perform. Polym., 17: 163173.
3.
Oprea, S., Vlad, S. and Stanciu, A. (2001). Poly(urethane-methacrylate)s. Synthesis and Characterization . Polymer, 42: 72577266.
4.
Wilkes, C.E. and Yusek, C.S. (1973). Investigation of Domain Structure in Urethan Elastomers by X-Ray and Thermal Methods. J. Macromol. Sci. Phys., B7: 157175.
5.
Dounis, D.V. and Wilkes, G.L. (1997). Structure-property Relationships of Flexible Polyurethane Foams. Polymer, 38: 28192828.
6.
Cheng, L.P. , Lin, H.Y., Chen, L.W. and Young, T.H. (1998). Solute Rejection of Dextran by EVAL Membranes with Asymmetric and Particulate Morphologies. Polymer, 39: 21352142.
7.
Young, T.H. , Cheng, L.P. and Lin, H.Y. (2000). Interesting Behavior for Filtration of Macromolecules through EVAL Membranes. Polymer, 41: 377383.
8.
Lin, D.T. , Cheng, L.P., Kang, Y.J., Chen, L.W. and Young, T.H. (1998). Effects of Precipitation Conditions on the Membrane Morphology and Permeation Characteristics. J. Membr. Sci., 140: 185194.
9.
Young, T.H. , Lin, D.T., Chen, L.Y., Huang, Y.H. and Chiu, W.Y. (1999). Membranes with a Particulate Morphology Prepared by a Drywet Casting Process. Polymer, 40: 52575264.
10.
Young, T.H. , Yao, C.H., Sun, J.S., Lai, C.P. and Chen, L.W. (1998). The Effect of Morphology Variety of EVAL Membranes on the Behavior of Myoblasts In Vitro. Biomaterials, 19: 717724.
11.
Fu, B.X. , Hsiao, B.S., Pagola, S., Stevens, P., White, H., Rafailovich, M., Sokolov, J., Mather, P.T., Jeon, H., Phillips, S., Lichtenhen, J.D. and Schwab, J. (2001). Structural Development during Deformation of Polyurethane-containing Polyhedral Oligomeric Silsesquioxanes (POSS) Molecules. Polymer, 42: 599611.
12.
Dreher, W.R. , Zhang, P. and Urban, M.W., (2003). Styrene/2-Ethylhexyl Acrylate/Methacrylic Acid (Sty/ EHA/MAA) Coalescence and Response-Driven Mobility of Sodium Dodecyl Sulfate (SDS) in Colloidal Films. 22. A Spectroscopic Study. Macromolecules, 36: 12281234.
13.
Thompson, R.B., Ginzburg, V.V., Matsen, M.W. and Balazs, A.C. (2001). Predicting the Mesophases of Copolymer-Nanoparticle CompositesScience, 292: 24692472.
14.
Yacoub, A. and Urban, M.W. (2003). Release of Phospholipids from Colloidal Particles to Polymeric SurfacesBiomacromolecules , 4: 5256.
15.
Zhao, Y. and Urban, M.W. (2000). Novel STY/nBA/GMA and STY/nBA/MAA Core-Shell Latex Blends: Film Formation, Particle Morphology, and Cross-Linking. 20. A Spectroscopic Study. Macromolecules, 33: 84268434.
16.
Han, Q. and Urban, M.W. (2001). Surface/interfacial Changes during Polyurethane Crosslinking: A Spectroscopic Study. V. J. Appl. Polym. Sci ., 81: 20452054.
17.
Otts, D.B., Zhang, P. and Urban, M.W. (2002). High Fidelity Surface Chemical Imaging at 1000 nm Levels: Internal Reflection IR Imaging (IRIRI) Approach. Langmuir, 18: 64736477.
18.
Brunauer, S., Emmett, P.H. and Teller, E. (1938). Adsorption of Gases in Multimolecular Layers. J. Am. Chem. Soc., 60: 309319.
19.
Yilmaz, L. and McHugh, A. (2003). Modeling of Assymetric Membrane Formation. The Effect of Surface Boundary. J. Appl. Polym. Sci., 35: 19671979.
20.
Young, T.H., Lai, J.Y., Yu, W.M. and Cheng, L.P. (1997). Equilibrium Phase Behavior of the Membrane Forming Water-DMSO-EVAL Copolymer System. J. Membr. Sci., 128: 5565.
21.
Young, Y.H. , Hsieh, C.C., Chen, L.Y. and Huang, Y.S. (1999). The Formation Mechanism of Membranes Prepared from the Crystalline EVAL PolymerWater (nonsolvent)2-propanol (nonsolvent) System. J. Membr. Sci. 159: 2127.
22.
Nunes, S.P. and Inoue, T. (1996). Formation and Gas Flux of Asymmetric PMMA Membranes. J. Membr. Sci. 109: 93107.
23.
Bulte, A.M.W. , Folkers, B., Mulder, M.H.V. and Smolders , C.A. (1993). Membranes of Semi-crystalline Aliphatic Polyamide Nylon 4,6: Formation by Diffusion-induced Phase Separation, J. Appl. Polym. Sci.50: 1319.
24.
Cheng, L.P. , Dwan, A.W. and Gryte, C.C. (1995). Membrane Formation by Isothermal Precipitation. J. Polym. Sci. Polym. Phys. 33: 223235.
25.
Wang, C.B. and Cooper, S.L. (1983). Morphology and Properties of Segmented Polyether Polyurethaneureas. Macromolecules16: 775786.
26.
Oprea, S. and Vlad, S. (2002). Evaluation of Physico-mechanical Properties of Precipitated Polyurethane Films in Medium of Free Radical Agents . Eur. Polym. J. 38: 14651470.
27.
Oprea, S. and Oprea, V. (2002). Mechanical Behavior during Different Weathering Tests of the Polyurethane Elastomer Films. Eur. Polym. J. 38: 12051210.
