The preparation of new types of polyureas with good thermal properties and improved solubility was investigated. Two new bulky diamines as new monomers for the preparation of polyurea were synthesized via two steps. First, a nucleophilic reaction of 1-naphthol and 2-naphthol with 3,5-dinitrobenzoyl chloride and then the reduction of the nitro groups by hydrazine hydrate/Pd-C to produce the corresponding diamines (1NA and 2NA). The poly(ester-urea)s were synthesized through the polyaddition reaction of the diamines with various commercially available diisocyanates. The polymers were characterized using IR and 1H NMR spectroscopy, elemental analysis, viscometry, thermal analysis, gel permeation chromatography (GPC), and X-ray diffraction. The copolymers were amorphous and readily soluble in a wide range of organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, dimethyl sulfoxide, N,N-dimethylformamide, and m-cresol. Thermal analysis showed a glass transition temperature between 146 and 178 °C. Their decomposition temperatures were more than 180 °C, and their 10% weight losses were in the range 281—315 ° C in air. The weight average molecular weights (Mw) of the polymers were about 32 200—40 500 g/mol.
Sengupta, R., Sabharwal, S., Bhowmick, A.K. and Chaki, T.K. (2006). Thermogravimetric Studies on Polyamide-6,6 Modified by Electron Beam Irradiation and by Nanofillers , Polym. Degrad. Stabil., 91: 1311—1318.
2.
Liaw, D.J. and Chen, W. (2006). High Glass Transitions of Novel Organosoluble Polyamide-imides Based on Noncoplanar and Rigid Diimide-dicarboxylic Acid, Polym. Degrad. Stabil., 91: 1731—1739.
3.
Mehdipour-Ataei, S., Sarrafi, Y. and Hatami, M. (2004). Novel Thermally Stable Polyimides Based on Flexible Diamine: Synthesis, Characterization, and Properties , Eur. Polym. J., 40: 2009—2015.
4.
Mehdipour-Ataei, S. and Heidari, H. (2004). Preparation of Novel Pyridine-based, Thermally Stable Poly(ether imide)s, J. Appl. Polym. Sci., 91: 22—26.
5.
Barikani, M. and Mehdipour-Ataei , S. (2000). Synthesis, Characterization, and Thermal Properties of Novel Arylene Sulfone Ether Polyimides and Polyamides, J. Polym. Sci. Part A: Polym. Chem., 38: 1487—1492.
6.
Mehdipour-Ataei, S. and Keshavarz, S. (2003). Use of New Diimide-dinaphthols in Preparation of Novel Thermally Stable Poly(ester-imide)s, J. Appl. Polym. Sci., 88: 2168—2172.
7.
Mehdipour-Ataei, S., Mosslemin, M.H. and Shafieezadeh , M. (2006). Preparation of Poly(ether amide imide)s from Five Different Methods and Investigation of Properties, React. Funct. Polym., 66: 403—412.
8.
Tang, W., Chen, D., Yang, Z., Zhang, A. and Peng, Y. (2005). Thermal Characterization and Thermal Degradation of Copolyimides Containing Fluorine and Phosphine Oxide, J. Appl. Polym. Sci., 98: 2139— 2143.
9.
Chol, K.H., Lee, K.H. and Jung, J.C. (2001). Synthesis of New Poly(amide imide)s with (n-Alkyloxy)phenyloxy Side Branches, J. Polym. Sci. Part A: Polym. Chem., 39: 3818—3825.
10.
Im, J., Lee, J., An, S., Song, K., Jo, N., Lee, J. and Yoshinaga, K. (2006). Preparation and Properties of Polyimide/silica Hybrid Composites Based on Polymer-modified Colloidal Silica, J. Appl. Polym. Sci., 100: 2053—2061.
11.
Holland, W.R. and Treliant, F. (1992). Thermally Stable Cyanate Polymer for Nonlinear Optical Applications, Polymeric Materials Science and Engineering (Proceedings of the ACS Division of Polymeric Materials Science and Engineering), 66: 500—501.
Holland, T.V., Glass, T.E. and McGrath, J.E. (2000). Investigation of the Thermal Curing Chemistry of the Phenylethynyl Group using a Model Aryl Ether Imide, Polymer, 41: 4965—4990.
14.
Holland, B.J. and Hay, J.N. (2000). Thermal Degradation of Nylon Polymers, Polym. Int., 49: 943—948.
15.
Williams, M.K., Holland, D.B., Melendez, O., Weiser, E.S., Brenner, J.R. and Nelson, G.L. (2005). Aromatic Polyimide Foams: Factors that Lead to High Fire Performance, Polym. Degrad. Stabil., 88: 20—27.
16.
Morgan, P.W. (1965). Condensation Polymers: By Interfacial and Solution Methods, Wiley-Interscience, New York, Chapter 5.
17.
Bonart, R. , Morbitzer, L. and Muller, E.H. (1974). X-ray Investigations Concerning the Physical Structure of Crosslinking in Urethane Elastomers. III. Common Structure Principles for Extensions with Aliphatic Diamines and Diols, J. Macromol. Sci. Phys., B9: 447—452.
Yang, Z., Li, S. and Ye, C. (2002). Thermally Stable Nonlinear Optical Polyurea Functionalized by Multiple Charge-transfer Chromophore, J. Polym. Sci. Part A: Polym. Chem., 40: 4297—4301.
20.
Ambade, A.V. and Kumar, A. (2004). Synthesis and Characterization of N-Substituted Hyperbranched Polyureas, J. Polym. Sci. Part A: Polym. Chem., 42: 5134—5145.
21.
Lee, S., Chen, C. and Wang, C. (2003). Conductivity and Characterization of Polyurea Electrolytes with Carboxylic Acid, J. Polym. Sci. Part A: Polym. Chem., 41: 4007—4016.
22.
Hong, K. and Park, S. (2000). Polyurea Microcapsules with Different Structures: Preparation and Properties, J. Appl. Polym. Sci., 78: 894—898.
23.
Qin, A., Yang, Z., Bai, F. and Ye, C. (2003). Design and Synthesis of a Thermally Stable Second-order Nonlinear Optical Chromophore and its Poled Polymers, J. Polym. Sci. Part A: Polym. Chem., 41: 2846— 2853.
24.
Bremeyer, N., Ley, S.V., Ramarao, C., Shirley, I.M. and Smith, S.C. (2002). Palladium Acetate in Polyurea Microcapsules: A Recoverable and Reusable Catalyst for Hydrogenations , Synlett., 11: 1843—1844.
25.
Hajas, J. and Woocker, A. (2002). Modified Ureas: An Interesting Opportunity to Control Rheology of Liquid Coating, Macromol. Symp., 187: 215—224.
26.
Riess, G. , Mendolia, M.S. and Schmidt, H. (2002). Novel Urea-siloxane Polymers as Gelling Agents for Silicone Fluids, Macromol. Symp., 181: 123—134.
27.
Ojha, U.P. , Ramesh, C. and Kumar, A. (2005). Design, Syntheses, and Characterization of New Thermoplastic Polyureas Based on 3,4-Ethylenedioxythiophene , J. Polym. Sci. Part A: Polym. Chem., 43: 5823—5830.
28.
Liu, L.F. , Yu, S.C., Wu, L.G. and Gao, C.J. (2006). Study on a Novel Polyamide-urea Reverse Osmosis Composite Membrane (ICIC—MPD): I. Preparation and Characterization of ICIC—MPD Membrane, J. Membr. Sci., 281: 88—94.
29.
Liu, L.F. , Yu, S.C., Zhou, Y. and Gao, C.J. (2006). Study on a Novel Polyamide-urea Reverse Osmosis Composite Membrane (ICIC-MPD): II. Analysis of Membrane Antifouling Performance, J. Membr. Sci., 283: 133—146.
30.
Okaniva, M., Takeuchi, K., Asai, M. and Ueda, M. (2002). One-Pot Synthesis of Dendritic Poly(amide-urea)s via Curtius Rearrangement. 2. Synthesis and Characterization of Dendritic Poly(amide-urea)s, Macromolecules, 35: 6232—6238.
31.
Ambade, V.A. and Kumar, A. (2004). Synthesis and Characterization of N-Substituted Hyperbranched Polyureas, J. Polym. Sci. Part A: Polym. Chem. , 42: 5134—5145.
32.
Chen, C., Dai, S.A., Chang, H., Su, W. and Jeng, R. (2005). Facile Approach to Polyurea/malonamide Dendrons via a Selective Ring-opening Addition Reaction of Azetidine-2,4-dione, J. Polym. Sci. Part A: Polym. Chem., 43: 682—688.
33.
Stanford, J.L. , Ryan, A.J. and Yang, Y. (2001). Reactive Processing of Acrylic-polyurea Interpenetrating Networks: Reaction Kinetic Studies, Polym. Int., 50: 1035—1045.
Zimmermann, J. , Loontjens, T., Scholtens, B.J.R. and Mülhaupt , R. (2004). The Formation of Poly(ester— urea) Networks in the Absence of Isocyanate Monomers, Biomaterials25: 2713—2719.
36.
Marcos-Fernández, A., Abraham, G.A., Valentín, J.L. and San Román , J. (2006). Synthesis and Characterization of Biodegradable Non-toxic Poly(ester-urethane-urea)s Based on Poly(ε-caprolactone) and Amino Acid Derivatives, Polymer47: 785—798.
