Abstract
This study aimed to perform histological, immunohistochemical, biomechanical, and wettability assessments of leukocyte- and platelet-rich fibrin (L-PRF) membranes obtained from the blood of healthy dogs. Ten client-owned Labrador Retriever dogs were enrolled. Blood samples were obtained from the external jugular vein using a vacuum tube without anticoagulant, which was immediately centrifuged at 400g for 12 min in a dedicated centrifuge. The L-PRF clot was removed from the tube, and the red clot was released from the buffy coat using a spatula. The membrane was produced using a PRF box. Histological examination identified the three portions of the L-PRF membranes. The first portion was composed mainly of red blood cells with the presence of a low number of leukocytes among them. The second portion was composed of white blood cells, mainly neutrophils. The third portion was composed of the fibrin network which was characterized by acidophilic staining. The immunohistochemical analysis showed that vascular endothelial growth factor and platelet-derived growth factor were expressed in all samples at different intensities, both in cellular components and fibrin mesh. The tensile test and wettability assessments were measured in membranes 30 min and 3 h after production. The 30 min L-PRF membranes supported twice the ultimate tensile strength compared to 3 h L-PRF membranes. The wettability of the 30 min sample membranes was statistically higher than the 3 h sample membranes. In conclusion, the centrifugation protocol allowed production of the L-PRF membrane using canine blood and this was confirmed by histological and immunohistochemical analysis. The mechanical resistance and wettability of the L-PRF membrane were significantly reduced over time.
Get full access to this article
View all access options for this article.