Comparing the Degree of Exothermic Polymerization in Commonly Used Acrylic and Provisional Composite Resins for Intraoral Appliances

Abstract

The use of dental acrylics and composite resins in veterinary dentistry has become widespread. However, their use is not without potential complications. All acrylics and composite resins produce an exothermic reaction during the polymerization process. The aim of the current study was to evaluate thermal conduction during the polymerization reaction of each material to offer clinical guidelines when choosing a material with particular consideration for the significant volumes typically used. Results showed that methylmethacrylate based resins generated a significantly higher degree of heat during polymerization. Bis-acryl based composite resins generated a significantly lower degree of heat during polymerization, making them the material of choice to potentially minimize thermal injury to the dentin-pulp complex. It is the responsibility of the clinician to become aware of all materials available, and to have an understanding of their properties to guide them in making sound clinical judgments.

Get full access to this article

View all access options for this article.

References

Laing

. Clinical experience with prosthetic materials: Historical perspectives, current problems, and future directions. In: Syrett

Acharya

. Corrosion and degradation of implant materials. American society for testing and materials, 1979; 199–211.

Niemiec

. Intraoral splint application. J Vet Dent 2003; 2:123–126.

Legendre

. Building a telescopic inclined plane intraorally. J Vet Dent 2010; 1:62–65.

Michalakis

Pissiotis

. Comparison of temperature increase in the pulp chamber during the polymerization of materials used for the direct fabrication of provisional restorations. J Prosth Dent 2006; 6:418–423.

Moulding

Teplitsky

. Intrapulpal temperature during direct fabrication of provisional restorations. Intl Jour Prosth 1990; 3:299–304.

Whalen

Bouschlicher

. Intrapulpal temperature increases with temporary crown and bridge material. Gen Dent 2003; 6:534–537.

Ferracane

. Provisional restoratives. In: Ferracane

. Materials in dentistry, principles and applications, 2nd ed. Lippencott, Williams and Wilkins, 2001; 223–235.

Rawls

. Dental polymers. In: Anusavice . Phillips' science of dental materials, 11th ed. St Louis: Saunders, 2003; 143–169.

Ferracane

. Direct aesthetic anterior restoratives. In: Ferracane

. Materials in dentistry, principles and applications, 2nd ed. Lippencott: Williams and Wilkins, 2001; 85–118.

10.

Ferracane

. Polymeric materials: The basics. In: Ferracane

. Materials in dentistry, principles and applications, 2nd ed. Lippencott: Williams and Wilkins, 2001; 255–280.

11.

Zach

Cohen

. Pulp response to externally applied heat. Oral surg oral med oral pathol 1965; 19:515–310.

12.

Lieu

Nguyen

Pavant

. In vitro comparison of peak polymerization temperature of 5 provisional restoration resins. J Can Dent Assoc 2001; 1:36–39.

13.

Stanley

. Pulpal response to dental techniques and materials. Dental clinics of north america 1971; 1:115–126.

14.

Chirtoc

Bicanic

. Monitoring the polymerization process of acrylic resins. Intl Jour Prosth 1995; 3:259–264.

15.

Peters

. Peters Cleaning and shaping of the root canal system. In: Cohen

Burns

, editors. Pathways of the pulp, 9th ed. St. Louis: Mosby, 2006; 290–357.

16.

Eriksson

Albrektsson

. Temperature threshold levels for heat-induced bone tissue injury: A vital-microscopic study in the rabbit. J Prosth Den 1983; 1:101–107.

17.

Lundskog

. An experimental investigation of the thermal properties of bone tissue and threshold levels for thermal injury. Thesis 1972; University of Goteborg.

18.

Plant

Jones

. The heat evolved and temperatures attained during setting of restorative materials. Brit Dent J 1974; 6:233–238.

19.

Braden

. Heat Conduction in normal human teeth. Archs Oral Biol 1964; 4:479–486.

20.

Fanibunda

De Sa

. Thermal conductivity of normal and abnormal human dentine. Archs Oral Biol 1975; 7:457–459.

21.

Vallittu

. Peak temperatures on some prosthetic acrylates on polymerization. J Oral Rehab 1996; 11:776–781.

22.

Driscoll

Woolsey

Ferguson

. Comparison of exothermic release during polymerization of four materials used to fabricate interim restorations. J Prosth Dent 1991; 4:504–506.