Optimizing Lamination of Hybrid Thick-Walled Cylindrical Shell under External Pressure by Using a Genetic Algorithm

Abstract

The effects of thermal residual stresses, strains, and stacking sequences resulting from hybrid composite material system selection on the design of thick-walled cross-ply cylindrical shells are discussed by using a simple and accurate finite cylindrical element method formulated by Byon and Vinson [1]. It is seen that beneficial effects can be realized in the cylindrical shells by utilizing a hybrid of graphite/epoxy and E-glass/epoxy material systems. An optimal stacking sequence of hybrid composite cylindrical shell is also proposed to give the smallest value of tensile strain in the through-the-thickness direction. This paper describes an optimal stacking sequence of a thick-walled cross-ply cylindrical shell laminated with hybrid composite materials determined by a genetic algorithm (GA) and shows that this method is useful for such an optimization problem.

References

1. Byon, O. and J. R. Vinson . "Stress Analysis of Thick Walled Cylindrical Anisotropic Shells," AIAA, Vol. 29, No. 12, 1992, pp. 2192-2196.

2. Commings, E. W. , "Technics of High Pressure Reaction (in Japanese)," Asakura Publ., 1962, p. 166-166.

3. Vinson, J. R. , "Methods of Analysis for Very Thick-Walled Cylindrical Shells," Transactions of the ASME, Journal of Engineering for Industry, Feb. 1975, pp. 175-181.

4. Hyer, M. W. , "Hydrostatic Response of Thick Laminated Composite Cylinders," Journal of Reinforced Plastics and Composites, Vol. 7, 1988, pp. 321-340.

5. Hyer, M. W. and D. E. Cooper , "Stresses and Deformations in Composite Tubes Due to a Circumferential Temperature Gradient," Transactions of the ASME, Journal of Applied Mechanics, Vol. 53, No. 4, 1986, pp. 757-764.

6. Hyer, M. W. , D. E. Cooper and D. Cohen , "Stresses and Deformations in Cross-Ply Composite Tubes Subjected to a Uniform Temperature Change," Journal of Thermal Stresses, Vol. 9, 1986., pp. 97-117.

7. Peros, V. "Thick-Walled Composite Material Pressure Hulls: Three-Dimensional Laminate Analysis Considerations," M.S. Thesis of Univ. Delaware, Newark, DE, Dec. 1987.

8. Vanderpool, M. E. and C. W. Bert , "Vibration of a Materially, Monoclinic, Thick-Wall Circular Cylindrical Shell," AIAA Journal, Vol. 19, No. 5, 1981, pp. 634-641.

9. Byon, O. and J. R. Vinson . "Stress Analyses of Thick Walled Cross-Ply Composite Cylindrical Shells Taking Account of Curing Stresses," Proc. 5th Japan-U.S. Conf. on Composite Materials, 1990, pp. 257-264.

10.

10. Byon , et al. "Stress Analysis of Thick Walled Cross-Ply Cylindrical Shells Laminated with Hybrid Composite," Proc. of 7th Japan-U.S. Conference of Composite Materials, 1995, pp. 441-448.