An analytical model of a taper-taper adhesive-bonded joint between two composite plates has been developed using a mechanics of materials approach. The derived model consists of four coupled second-order ordinary differential equations with polynomial coefficients. The equations were reduced to a set of eight coupled, first-order differential equations and integrated numerically. The solutions were obtained by using an algorithm based on the Linear Shooting Method. Analytical model results were compared with finite element analyses and a model published in 1971 by Erdogan and Ratwani. The analytical model agrees well with the other two models.
Burden, R. L. and J. D. Faires. 1985. Numerical Analysis, 3rd Edition, Weber & Schmidt.
2.
Erdogan, F. and M. Ratwani. 1971. "Stress Distribution in Bonded Joints,"J. of Composite Materials, Vol. 5.
3.
Goland, M. and E. Reissner. 1944. "The Stress in Cemented Joints,"J. of Applied Mechanics, A-17-A-27.
4.
Hart-Smith, L. J.1973a. "Adhesive-Bonded Single-Lap Joints,"Douglas Aircraft Co., NASA Langley Report CR 112236
5.
Hart-Smith, L. J.1973b. 'Adhesive-Bonded Double-Lap Joints,"Douglas Aircraft Co., NASA Langley Report CR 112235.
6.
Hart-Smith, L. J.1973c. "Adhesive-Bonded Scarf and Stepped-Lap Joints,"Douglas Aircraft Co., NASA Langley Report CR 112237
7.
Hart-Smith, L. J.1974. "Analysis and Design of Advanced Composite Bonded Joints,"Douglas Aircraft Co., NASA Langley Report CR-2218.
8.
Helms, J. E. , R. D. Bradshaw, C. Yang and S. S. Pang, 1993. "Analysis of a Taper-Taper Adhesive Bonded Pipe Joint Without Coupling," ANTEC. Vol. II, pp. 1468-1473.
9.
Helms, J. E. , C. Yang and S. S. Pang. 1994. 'Analysis of a Taper-Taper Adhesive Bonded Joint in a Composite Flat Plate," ANTEC. Vol. I, pp. 1284-1288.
10.
Kutscha, D.1964. "Mechanics of Adhesive-Bonded Lap-Type Joints: Survey and Review," Technical Report AFML-TDR-64-29&
11.
Kutscha, D. and K. E. Hofer Jr.1969. "Feasibility of Joining Advanced Composite Flight Vehicles," Technical Report AFML-TR-68-391.
12.
Matthews, F. L. , P. F. Kilty and E. G. Goodwin. 1982. 'A Review of the Strength of Joints in Fibre-Reinforced Plastics: Part 2 Adhesively Bonded Joints,"'Composites, pp. 29-37.
13.
Reddy, J. N.1984. 'A Redefined Nonlinear Theory of Plates with Transverse Shear Deformation,"Int. J. of Solids Structures, Vol. 20, pp. 881-896.
14.
Reissner, E.1945. "The Effect of Transverse Shear Deformation on the Bending of Elastic Plates,"J. of Applied Mechanics, No. 12, A69-A77.
15.
Sanchez, D. A.1968. Ordinary Differential Equations and Stability Theory: An Introduction, W. H. Freeman and Company.
16.
Structural Research and Analysis Corporation . 1992. COSMOSIM Finite Element System User Guide, Version 1.65A.
17.
Vinson, J. R.1989. "Adhesive Bonding of Polymer Composites,"Polymer Engineering and Science, 29(19):1325-1331.
18.
Vinson, J. R. and R. L. Sierakowski. 1987. The Behavior of Structures Composed of Composite Materials, Kluwer Academic Publishers.
19.
Yang, C. and S. S. Pang. (In Press). "Stress-Strain Analysis of Single-Lap Composite Joints Under Tension,"J. of Engineering Materials and Technology.
