Composite to Metal Joints for the ARPA Man-Rated Demonstration Article

Abstract

The design, analysis and testing of composite-to-metal joints for the ARPA Man-Rated Demonstration Article are discussed. The first is a composite-to-titanium sphere joint designed to react sphere membrane stress with block compression loading. A series of uniaxial compression tests to simulate this joint assembly was conducted. Test results successfully demonstrated the ability of the joint to withstand block compression loading even in the presence of assembly fitup gaps. A polymer shimming material (Hysol EA9394) was also evaluated as a means to fill potential fitup gaps and was found to effectively reduce stress concentrations resulting from the gaps. The second joint discussed is one between 120-degree segments that make up a stiffener ring for a ringstiffened composite cylinder. Joint design includes Hysol EA9394, boltedon titanium splice plates, and bondedon thermoset flange straps. 2D joint tests, single stiffener tests, and sub-scale ring-stiffened cylinder hydrostatic tests to validate the joint design are described.

References

1. Hoffman, P. and J. J. Kelly . 1992. "Manufacture of Advanced Composite Submarine Structures (MACSS)," Porceedings of 37th International SAMPE Symposium.

2. Leon, G. F. and B. Coffenberry . 1992. "Proposed Fabrication Processes for Thick Composite Submarine Structures," Proceedings of 37th International SAMPE Symposium.

3. Goering, J. , R. E. Bohlmann , S. Wanthal , E. Kautz and L. Neri . 1991. "Assembly Induced Delaninations in Composite Structures," Proceedings of Ninth Do D/NASA/FAA Conference on Fibrous Composites in Structural Design, Lake Tahoe.

4. 1988. "Dexter Hysol EA9394 Aerospace Adhesive Products Bulletin," Rep. No. Feb., 2850 Willow Pass Road, P.O. Box 312, Pittsburg, CA 94565: HYSOL Aerospace & Industrial Products Division.

5. Camponeschi, E. T., Jr., R. E. Bohlmann, J. Hall and T. T. Carr. 1992. "Effect of Assembly Anomalies on the Strain Response of Composites in the Sphere Joint Region of The DARPA Man-Rated Demonstration Article," CARDEROCKDIV, NSWC Rep. No. SME-92/22, April.

6. Camponeschi, E. T., Jr. 1991. "Compression Testing of Thick-Section Composite Materials," Fatigue and Fracture of Composite Materials, (Third Conference), ASIM STP 1110, T. K. O'Brien , ed., ASTM, pp. 439-456.

7. Camponeschi, E. T. J. , J. W. Gillespie, Jr. and D. J. Wilkins . 1993. "Kink-Band Failure Analysis of Thick Composites in Compression," Journal of Composite Materials, 27(8).

8. Hipp, R. C. , C. A. Fracchia and R. E. Bohlmann . 1992. "Four Foot Diameter Subscale Model Thermoplastic Composite Ring Stiffiened Cylinder Strength Report," MDC Rep. No. 92B0532, October.

9. 1985. Macneal-Schwendler , "MSC NASTRAN Finite Element Analysis Program-V.66," The Macneal-Schwendler Corp. Rep. No., August.

10.

10. Szabo, B. A. and Babuski, I. 1991. Probe: Finite Element Analysis. John Wiley and Sons.

11.

11. Hart-Smith, J. L. 1974. "Analysis and Design of Advanced Composite Bonded Joints" Rep. No. NASA CR-2218, August.