Resistance Welding of Graphite Polyetheretherketone Composites: An Experimental Investigation

Abstract

Resistance welding of preconsolidated unidirectional graphite (AS4) rein forced polyetheretherketone (PEEK) composite laminates (I.C.I. APC-2) is investigated experimentally. An apparatus is developed to conduct experiments to identify important process variables governing the efficiency of the welding process. Experiments were con ducted under displacement control and prescribed initial consolidation pressure. Heating elements consisted of a single ply of APC-2 with adjacent layers of neat film to minimize current leakage into the laminates to be welded. Temperature at the weld interface and consolidation pressure versus time were monitored and provided insight into the welding process. A strong correlation between the extent of welded surface area and process parameters such as power, energy and time in the melt were demonstrated. The quality and extent of the welded surface is quantified using ultrasonic nondestructive evaluation techniques. Experimental results indicate that superior welds exhibiting greater repro ducibility are obtained at lower power levels that promote more homogeneous temperature distributions.

References

National Material Advisory Board , "The Place for Thermoplastic Composites in Structural Composites" Technical Report 434, National Research Council (1987)

Benatar, A. "Ultrasonic Welding of Advanced Thermoplastic Composites," Ph D Dissertation , Dept of Mech Eng , MIT (1987)

Benatar, A. and T.G. Gutowski "Methods for Fusion Bonding Thermoplastic Composites," SAMPE Quarterly, 18(1) 34-41 (October 1986)

Advanced Fiber Reinforced Thermoplastic Structures, Air Force Wright Aeronautical Laboratories, AFWAL-TR-80-3023 (April 1980)

Houghton, W.R. "Bonding of Graphite Reinforced Thermoplastics Using Resistance Heating," S.B Thesis, Dept. of Mech Eng , MIT (1984)

Stokes, V.J. "Vibration Welding of Thermoplastics—Part I: Phenomenology and Analysis of the Welding Process" General Electric Corporate Research and Development Technical Information Series 86CRD223 (November 1986)

Stokes, V.J. "Vibration Welding of Thermoplastics—Part II Strength of Butt Welds," General Electric Corporate Research and Development Technical Information Series 87CRD061 (June 1987)

Eveno, E.C. "Experimental Investigation of Resistance and Ultrasonic Welding of Graphite Reinforced Polyetheretherketone Composites," M S. Thesis Dept of Mech Eng., University of Delaware ( 1988)

Maguire, D.M. "Joining Thermoplastic Composites," SAMPE Journal, 25(1)11-14 (January/ February 1989)

10.

Kim, Y.H. and R.P. Wool "A Theory of Healing at a Polymer-Polymer Interface," Macromolecules, Vol 16 ( 1983)

11.

Prager, S. and M. Tirrel "The Healing Processes at Polymer-Polymer Interfaces," J Chem Phys., Vol. 75 (November 1981).

12.

Howes, J.C. and A.C. Loos "Autohesive Strength Development in Polysulfone Resin and Graphite-Polysulfone Composites," Proceedings of the Second Technical Conference on Composites, American Society for Composites, Technomic Publishing, pp 110-119 (1987)

13.

Maffezzoli, A.M. , J.M. Kenny and L. Nicolais "Welding of PEEK/Carbon Fiber Composite Laminates," SAMPE Journal , 25(1) 35-39 (January/February 1989)

14.

" Fabricating with Aromatic Polymer Composite, APC-2," Data Sheet 5, Fiberite Corporation (1986 )

15.

Blundell, D.J. and F.M. Willmouth "Crystalline Morphology of the Matrix of PEEK-Carbon Fiber Aromatic Polymer Composites," SAMPE Quarterly, pp 50-57 (January 1986)

16.

Velisaris, C.N. and J.C. Seferis "Crystallization Kinetics of Polyetheretherketone (PEEK) Matrices, Polymer Engineering and Science, 26(22):1574-1581 (1986)

17.

Zoller, P. "Solidification Processes in Thermoplastics and Their Role in the Development of Internal Stresses in Composites," Proceedings of the Third Annual Conference on Composites, American Society for Composites, Technomic Publishing, pp 439-448 (1988)

18.

Lee, W.I. , M.F. Talbot , G.S. Springer and L.A. Berglund "Effects of Cooling Rate on the Crystallinity and Mechanical Properties of Thermoplastic Composites," Proceedings of the First Conference on Composites, American Society for Composites, Technomic Publishing, pp. 119-128 (1986)

19.

Ogale, A.A. and R.L. McCullough "Influence of Microstructure on Elastic and Viscoelastic Properties of Polyetheretherketone," Composites Science and Technology, 30 185 (1987)

20.

Manson, J.A. and J.C. Seferis "Internal Stress Determination by Process Simulated Laminates,"

SPE ANTEC '87 Conference Proceedings, Los Angeles (May 1987)

21.

Manson, J.A. and J.C. Seferis "Intrinsic Process Characterization and Scale Up of Advanced Thermoplastic Structures," SPE ANTEC '88 Conference Proceedings, Atlanta, GA (April 1988).

22.

Jeronimidis, G. and A.T. Parkyn.

"Residual Stresses in Carbon Fibre-Thermoplastic Matrix Laminates,"

Journal of Composite Materials, Vol 22 (May 1988 ).

23.

Chapman, T.J. , J.W. Gillespie, Jr , R.B. Pipes , J A-E Manson and J.C. Seferis "Thermal/Skin Core Residual Stresses Induced During Cooling of Thermoplastic Matrix Composites," Proceedings of the Third Technical Conference on Composites, American Society for Composites, Technomic Publishing ( 1988)

24.

Chapman, T.J. "The Effect of Cooling Rate on Residual Stresses and Mode I Fracture Toughness of Thermoplastic Composite Materials," M S Thesis Dept of Mech Eng., University of Delaware (August 1988).