Thermal management in composite materials used in high-tech industries is a growing criticality. In this contribution, the effect of adding silver nanowires (AgNWs) on the temperature-dependent heat conduction coefficients of aligned short carbon fiber-reinforced polymer nanocomposites is investigated using a multiphase micromechanical model. First, the thermal conductivity of AgNW-filled polymer materials is evaluated within the framework of the micromechanics. The most important microstructural features including percentage, length, diameter, and anisotropic behavior of AgNWs, as well as the nanofiller/polymer interfacial thermal resistance (ITR) are incorporated. Then, a unit cell-based model in conjunction with a 3D representative volume element is developed to predict the transverse and longitudinal thermal conductivities of AgNW/aligned short fiber-reinforced nanocomposites. Results show that thermal properties of short fiber composites are improved significantly by the addition of AgNWs. Also, using AgNWs with a smaller diameter and a greater length is an efficient means to achieve much better thermal conductivity enhancement. A lower ITR between AgNWs and polymer matrix can enhance the heat conduction coefficients. It is noticed that the longitudinal thermal conductivity of the AgNW/aligned short fiber-reinforced nanocomposite increases with increasing fiber aspect ratio, while its transverse thermal conductivity is not affected by varying the aspect ratio. Comparisons show that the micromechanical predictions agree well with the experimental measurements. Our findings can be useful for the design and optimization of hybrid nanocomposites containing AgNWs with tailored thermal transport properties for advanced industries.
KangishwarSRadhikaNSheikAA, et al.A comprehensive review on polymer matrix composites: material selection, fabrication, and application. Polym Bull2023; 80: 47–87. https://doi.org/10.1007/s00289-022-04087-4
2.
RushoMAAhmedTASalehLH, et al. Design and synthesis of decorated palladium nanoparticles on chitosan-tannic acid modified magnetic nanoparticles and evaluation of its catalytic application in the Heck coupling reactions. Journal of Organometallic Chemistry. 2025; 1039: 123773. https://doi.org/10.1016/j.jorganchem.2025.123773
3.
ZhangCLouMWangY, et al.Mechanical responses and microscopic irreversible deformation evolution of thermoplastic fiber-reinforced composites under cyclic loading. Int J Fatig2026; 203: 109327. https://doi.org/10.1016/j.ijfatigue.2025.109327
4.
SinghNSSGataaISSalehIS, et al. Design and immobilized gold nanoparticles into the chitosan-xanthan gum polymers as a novel catalyst for efficient nitroarenes reduction in water. J Organometal Chem. 2026; 1043: 123902. https://doi.org/10.1016/j.jorganchem.2025.123902
5.
SajanSPhilip SelvarajD. A review on polymer matrix composite materials and their applications. Mater Today Proc2021; 47(Part 15): 5493–5498. https://doi.org/10.1016/j.matpr.2021.08.034
6.
YangCZhouYWangX, et al.Sustainable high thermal conductivity composites from biomass: bio-based polyimide/microencapsulated CNTs for green thermal management. ACS Appl Polym Mater2026; 8: 2762–2775. https://doi.org/10.1021/acsapm.5c04260
7.
AliABMAbdullaevASaitovE, et al. Hierarchical ZnO-NR@C/Al2O3-NF composite: a durable binder-free electrode for advanced supercapacitors. Journal of Materials Science: Materials in Electronics. 2026; 37: 150. https://doi.org/10.1007/s10854-025-16516-x
8.
LiuCWuWDrummerD, et al.Significantly enhanced thermal conductivity of polymer composites via establishing double-percolated expanded graphite/multi-layer graphene hybrid filler network. Eur Polym J2021; 160: 110768. https://doi.org/10.1016/j.eurpolymj.2021.110768
9.
Long NgoIVuVT. A comprehensive study on enhancing effective thermal conductivity of polymer composites with randomly distributed triple fillers. Int J Therm Sci2024; 197: 108793. https://doi.org/10.1016/j.ijthermalsci.2023.108793
10.
Naveen KumarGRajeshKRama Durga RaoM, et al. Javvadi eswara manikanta, A review on mechanical properties of hybrid polymer composites. Mater Today Proc. 2023; 12: 567.
11.
FongAWongDHLauS, et al.A review on the hybrid polymer composites comprising natural fibre and nanomaterial reinforcement. J Compos Mater2025; 59(22): 2615–2646. https://doi.org/10.1177/00219983251334861
12.
SinhaAKNarangHKBhattacharyaS. Mechanical properties of hybrid polymer composites: a review. J Braz Soc Mech Sci Eng2020; 42: 431. https://doi.org/10.1007/s40430-020-02517-w
13.
WangSQiuJ. Enhancing thermal conductivity of glass fiber/polymer composites through carbon nanotubes incorporation. Compos B Eng2010; 41(Issue 7): 533–536. https://doi.org/10.1016/j.compositesb.2010.07.002
14.
QiaoLZhuKTanH, et al.Effect of carbon nanotubes on the electrical, thermal, mechanical properties and crystallization behavior of continuous carbon fiber reinforced polyether-ether-ketone composites. Mater Res Express2021; 8: 045312. https://doi.org/10.1088/2053-1591/abf6f9
15.
SungDHKimMParkY-B. Prediction of thermal conductivities of carbon-containing fiber-reinforced and multiscale hybrid composites. Compos B Eng2018; 133: 232–239. https://doi.org/10.1016/j.compositesb.2017.09.032
16.
JangJOh SoSKimJH, et al.Enhanced thermal conductivity of graphene nanoplatelet filled polymer composite based on thermal percolation behavior. Compos Commun2022; 31: 101110. https://doi.org/10.1016/j.coco.2022.101110
17.
ZhangJRagabTWangM, et al.Effect of graphene nanoplatelets relative size and polyethylene chain length on the enhancement of thermal conductivity of their composite. Int J Therm Sci2024; 195: 108617. https://doi.org/10.1016/j.ijthermalsci.2023.108617
18.
Hassanzadeh-AghdamMKAnsariRJamaliJ, et al.Heat transfer characteristics in discontinuous silicon carbide-reinforced aluminum multiphase composites containing nano-graphene additives: a micromechanics-based multistep technique. J Braz Soc Mech Sci Eng2022; 44(8): 344. https://doi.org/10.1007/s40430-022-03650-4
19.
RuanKShiXGuoY, et al.Interfacial thermal resistance in thermally conductive polymer composites: a review. Compos Commun2020; 22: 100518. https://doi.org/10.1016/j.coco.2020.100518
20.
Hassanzadeh-AghdamMKMahmoodiMJJamaliJ, et al.A new micromechanical method for the analysis of thermal conductivities of unidirectional fiber/CNT-reinforced polymer hybrid nanocomposites. Compos B Eng2019; 175: 107137. https://doi.org/10.1016/j.compositesb.2019.107137
21.
UmerUHaider AbidiMMianSH, et al. Micromechanical evaluation of thermal conductivities of polymer hybrid composites containing SiO2 microparticles and graphene nanofillers. J Compos Mater. 2025; 23: 00219983251376463.
22.
MoradiAAnsariRHassanzadeh-AghdamMK, et al.Numerical prediction of thermal conductivity and thermal expansion coefficient of glass fiber-reinforced polymer hybrid composites filled with hollow spheres. J Compos Mater2024; 58(9): 1123–1136. https://doi.org/10.1177/00219983241235857
23.
KausarA. State-of-the-art of poly (ether ether ketone) matrix reinforced with nanocarbons (carbon nanotube/carbon Black) and carbon fibers—promising design, physical attributes and futuristic opportunities. J Thermoplast Compos Mater2025: 08927057251344251.
24.
KausarA. Current state-of-the-art of carbonaceous nanofiller coated carbon fiber in polymeric nanocomposites. J Thermoplast Compos Mater2023; 36(11): 4559–4579. https://doi.org/10.1177/08927057221139590
25.
WuXShiSTangB, et al.Achieving highly thermal conductivity of polymer composites by adding hybrid silver–carbon fiber fillers. Compos Commun2022; 31: 101129. https://doi.org/10.1016/j.coco.2022.101129
26.
Rezazadeh KalashamiEAnsariRHassanzadeh-AghdamMK, et al.Multiscale finite element modeling of effective thermal conductivities of short glass fiber/polyethylene composites containing copper nanoparticles. Int Commun Heat Mass Tran2026; 171: 110062. https://doi.org/10.1016/j.icheatmasstransfer.2025.110062
27.
Kazem Hassanzadeh-AghdamMAnsariRMohaddes DeylamiH. Influence of graphene nano-platelets on thermal transport performance of carbon fiber-polymer hybrid composites: overall assessment of microstructural aspects. Int J Therm Sci2022; 171: 107209. https://doi.org/10.1016/j.ijthermalsci.2021.107209
28.
LiZWangDZhangM, et al.Enhancement of the thermal conductivity of polymer composites with Ag–graphene hybrids as fillers. Phys Status Solidi A Appl Mater Sci2014; 211(9): 2142–2149. https://doi.org/10.1002/pssa.201431054
29.
PashayiKFardHRLaiF, et al.High thermal conductivity epoxy-silver composites based on self-constructed nanostructured metallic networks. J Appl Phys2012; 111: 104310. https://doi.org/10.1063/1.4716179
30.
Nouri-BorujerdiAKazemi-RanjbarS. Thermal synergistic effect in hybrid filler epoxy composites consisting of graphene nanoplatelets and SiC particles. Therm Sci Eng Prog2021; 25: 100964. https://doi.org/10.1016/j.tsep.2021.100964
31.
XuNLiSChenY, et al.Enhancing the thermal conductivity of composite materials via surface microstructure design. Compos Commun2025; 53: 102203. https://doi.org/10.1016/j.coco.2024.102203
32.
ShinHYangSChangS, et al.Multiscale homogenization modeling for thermal transport properties of polymer nanocomposites with Kapitza thermal resistance. Polymer2013; 54(5): 1543–1554. https://doi.org/10.1016/j.polymer.2013.01.020
33.
Karger-KocsisJMahmoodHPegorettiA. Recent advances in fiber/matrix interphase engineering for polymer composites. Prog Mater Sci2015; 73: 1–43. https://doi.org/10.1016/j.pmatsci.2015.02.003
34.
El AoudBAlthobaitiSAljohaniAF, et al.Micromechanical modeling of thermal conductivities of unidirectional carbon fiber/epoxy composites containing carbon nanotube/graphene hybrids. Int Commun Heat Mass Tran2024; 157: 107726. https://doi.org/10.1016/j.icheatmasstransfer.2024.107726
35.
YuJLacyTEToghianiH, et al.Micromechanically-based effective thermal conductivity estimates for polymer nanocomposites. Compos B Eng2013; 53: 267–273. https://doi.org/10.1016/j.compositesb.2013.04.055
36.
DengFZhengQSWangLF, et al.Effects of anisotropy, aspect ratio, and nonstraightness of carbon nanotubes on thermal conductivity of carbon nanotube composites. Appl Phys Lett2007; 90(2): 021914. https://doi.org/10.1063/1.2430914
McIvorSDDarbyMIWostenholmGH, et al.Thermal conductivity measurements of some glass fibre-and carbon fibre-reinforced plastics. J Mater Sci1990; 25(7): 3127–3132. https://doi.org/10.1007/bf00587661
41.
SayyidmousaviABougheraraHFalahatgarSR, et al.Prediction of the effective thermal conductivity of fiber reinforced composites using a micromechanical approach. Journal of Mechanics2019; 35(2): 179–185. https://doi.org/10.1017/jmech.2017.88
42.
ChoyCLKwokKWLeungWP, et al.Thermal conductivity of poly (ether ether ketone) and its short‐fiber composites. J Polym Sci B Polym Phys1994; 32(8): 1389–1397. https://doi.org/10.1002/polb.1994.090320810
43.
SeshadriIEsquenaziGLCardinalT, et al.Microwave synthesis of branched silver nanowires and their use as fillers for high thermal conductivity polymer composites. Nanotechnology2016; 27(17): 175601. https://doi.org/10.1088/0957-4484/27/17/175601
44.
ChengZLiuLXuS, et al.Temperature dependence of electrical and thermal conduction in single silver nanowire. Sci Rep2015; 5(1): 10718. https://doi.org/10.1038/srep10718
