Jute fabrics (hessian cloth) reinforced polypropylene (PP) matrix composites (30% fiber by weight) were fabricated by compression molding. Tensile strength (TS), tensile modulus (TM), and percentage elongation at break (Eb) of the composites were found to be 32 MPa, 740 MPa, and 16%, respectively. Then jute fabrics reinforced solid natural rubber (NR)-based composites (30% fiber by weight) were also fabricated and it was found that TS, TM, and Eb of the jute/NR composites were 14 MPa, 120 MPa, and 94%, respectively. The mechanical properties of jute/PP and jute/NR composites were compared. Six weeks of degradation of the composites were performed in aqueous medium and it was found that jute/NR composites lost much of its original strength and modulus compared to that of the jute/PP composites. Interfacial shear strength (IFSS) of the jute/PP and jute/NR systems was investigated by using the single fiber fragmentation tests. The IFSS of jute/PP and jute/NR systems appeared to be 2.16 and 0.89 MPa, respectively. Fracture side of the composites was also studied by scanning electron microscope and suggested better fiber matrix adhesion between jute fiber and PP.
Jacob, M., Thomas, S. and Varughese, K.T. ( 2004). Natural Rubber Composites Reinforced with Sisal/Oil Palm Hybrid Fibers: Tensile and Cure Characteristics, Journal of Applied Polymer Science, 93: 2305-2312.
2.
Das, D., Datta, M., Chavan, R.B. and Datta, S.K. ( 2005). Coating of Jute with Natural Rubber, Journal of Applied Polymer Science, 98: 484-489.
3.
Ichazo, M.N. , Hernandez, M. and Gonzalez, J. (2006). Curing and Physical Properties of Natural Rubber/Wood Flour Composites, Journal of Macromolecular Symposia, 239: 192-200.
4.
Seible, F. and Karbhari, V.M. ( 1996). Advanced Composites for Civil Engineering Applications in the United States, In: Proceedings of the 1st International Conference on Composites in Infrastructure, Tucson, Arizona, January, pp. 21-37.
5.
Munikenche, G.T., Naidu, A.C.B. and Rajput, C. (1999). Some Mechanical Properties of Untreated Jute Fabric Reinforced Polyester Composites , Composites Part A, 30: 277-284.
6.
Mishra, S., Mohanty, A.K., Drzal, L.T., Misra, M., Parija, S., Nayak, S.K. and Tripathy, S.S. ( 2003). Studies on Mechanical Performance of Biofibre/Glass Reinforced Polyester Hybrid Composites, Composites Science and Technology , 63: 1377-1385.
7.
Bullions, T.A. , Gillespie, R.A., Price-O’Brien , J. and Loos, A.C. ( 2004). The Effect of Maleic Anhydride Modified Polypropylene on the Mechanical Properties of Feather Fiber, Kraft Pulp, Polypropylene Composites , Journal of Applied Polymer Science, 92: 3771-3783.
8.
Mohanty, A.K. , Misra, M. and Hinrichsen, G. (2000). Biofibers, Biodegradable Polymer and Biocomposites: An Overview, Macromolecular Materials and Engineering, 276: 1-24.
9.
Joseph, P.V. , Joseph, K. and Thomas, S. ( 2002). Short Sisal Fiber Reinforced Polypropylene Composites: The Role of Interface Modification on Ultimate Properties , Composites Interface, 9(2): 171-205.
10.
Cantero, G. , Arbelaiz, A., Llano-Ponte, R. and Mondragon, I. ( 2003). Effects of Fiber Treatment on Wettability and Mechanical Behavior of Flax/Polypropylene Composites, Composites Science and Technology, 63: 1247-1254.
11.
Buck, S.E., Lischer, D.W. and Nemat-Nasser, S. ( 1998). The Durability of E-glass/Vinyl Ester Composite Materials Subjected to Environmental Conditioning and Sustained Loading, Journal of Composite Materials, 32(9): 874-892.
12.
Cameron, N.M. (1968). The Effect of Environment and Temperature on the Strength of E-glass Fibers. Part 1: High Vacuum and Low Temperature, Glass Technology, 9(1): 14-21.
13.
Saheb, D.N. and Jog, J.P. ( 1999). Natural Fiber Polymer Composites: A Review, Advances in Polymer Technology, 18(4): 351-63.
14.
Cantero, G. , Arbelaiz, A., Llano-Ponte, R. and Mondragon, I. ( 2003). Effects of Fiber Treatment on Wettability and Mechanical Behavior of Flax/Polypropylene Composites, Composites Science and Technology, 9(63): 1247-58.
15.
Mohanti, A.K. and Mirsa, M. (1995). Studies on Jute Composites: A Literature Review, Polymer Plastic Technology and Engineering , 35(5): 729.
16.
Rahman, S.M.M.A. , Khan, M.A. and Mustafa, A.I. (2008). Jute Reinforced Polypropylene Composite: Effect of Surface Pretreatment by Photocuring with Acrylic Monomers , Journal of Reinforced Plastics and Composites, 28(14): 1733-1745.
17.
Khan, M.A., Shehrzade, S. and Hassan, M.M. ( 2004). Effect of Alkali and Ultraviolet (UV) Radiation Pretreatment on Physical and Mechanical Properties of 1,6-Hexanediol diacrylate-grafted Jute Yarn by UV Radiation, Journal of Applied Polymer Science , 92: 18-24.
18.
Mosiewicki, M.A., Aranguren, M.I., Curvelo, A.A.S. and Borrajo , J. ( 2007). Effect of Natural Rubber on Wood-reinforced Tannin Composites, Journal of Applied Polymer Science, 105: 1825-1832.
19.
Jobando, V.O. and Quarles, C.A. (2007). Effect of Cross-Linking on the Free Volume Properties of Natural Rubber, Journal of Physica Status Solidi(C) 4, 4: 3759-3762.
20.
Ngolemasango, E.F., Bennett, M. and Clarke, J. (2006). Kinetics of the Effect of Aging on Tensile Properties of a Natural Rubber Compound, Journal of Applied Polymer Science, 102: 3732-3740.
21.
Cabral, F.S. , Paiva, M.C., Nunes, J.P. and Bernardo, C.A. (2003). A Novel Technique for the Interfacial Characterization of Glass Fiber-Polypropylene Systems, Polymer Testing, 22: 907-913.
22.
National Physical Laboratory (London, England) (2001). Report No. MATC (A), Vol. 16, pp. 1-69.
23.
Greenfield, M.J., Pedicini, A. and Penn, L.S. (2000). Development of a Single Fiber Fragmentation Test for High Strain Rates, International Journal of Adhesion and Adhesives, 20: 403-407.
24.
Zhou, X.F., Wagner, H.D. and Nutt, S.R. ( 2001). Interfacial Properties of Polymer Composites Measured by Push-out and Fragmentation Tests, Composites: Part A, 32: 1543-1551.
25.
Slivka, M.A. , Chu, C.C. and Adisaputro , I.A. (1997). Fiber-matrix Interface Studies on Bioabsorbable Composite Materials for Internal Fixation of Bone Fractures. I. Raw Material Evaluation and Measurement of Fiber-Matrix Interfacial Adhesion, Journal of Biomedical Materials Research, 36: 469-477.
26.
Kelly, A. and Tyson, W.R. ( 1965). Tensile Properties of Fibre Reinforced Metals: Copper/ Tungsten, Copper/Molybdenum, Journal of Mechanics and Physics of Solids, 13: 329-350.
27.
Drzal, L.T. , Rich, M.J., Koeng, M.F. and Lloyd, P.F. (1983). Adhesion of Graphite Fibres to Epoxy Matrices, Journal of Adhesion, 16: 133-152.
28.
Wu, H.F. and Netravali, A.N. ( 1992). Weibull Analysis of Strength-Length Relationships in Single Nickell on SiC Fibres, Journal Material Science, 27: 3318-3324.
29.
Honggang, W. , Zheng, A. and Dae, G. ( 1999). Study on the Interfacial Bonding of Glass Fibre Reinforced Polypropylene Composite. 2. Effect of Elements on Interfacial Shear Strength and Determination of its Optimum, East China University of Technology, Fuhe Cailiao Xuebao, 16: 51-56.
30.
Khan, R.A., Parsons, A.J., Jones, I.A., Walker, G.S. and Rudd, C.D. ( 2009). Surface Treatment of Phosphate Glass Fibers using 2-Hydroxyethyl Methacrylate: Fabrication of Poly(Caprolactone)-based Composites , Journal of Applied Polymer Science, 111(1): 246-254.
31.
Khan, R.A., Khan, M.A., Sultana, S., Khan, M.N. and Noor, F.G. ( 2009). Mechanical, Degradation and Interfacial Properties of Synthetic Degradable Fiber Reinforced Polypropylene Composites, Journal of Reinforced Plastics and Composites. Available at: http://jrp.sagepub.com/cgi/content/abstract/0731684408100699v1 . Published Online on 23 February.
32.
Khan, R.A., Khan, M.A., Zaman, H.U. and Sultana, S. ( 2009). Comparative Studies of Mechanical and Interfacial Properties Between Jute and E-Glass Fiber-Reinforced Polypropylene Composites , Journal of Reinforced Plastics and Composites. Available at: http://jrp.sagepub.com/cgi/content/abstract/0731684409103148v1 . Published Online on 23 June.
33.
Khan, M.A., Khan, R.A., Ghoshal, S. and Saha, M. ( 2009). Study on the Physico-Mechanical Properties of Starch-Treated Jute Yarn-Reinforced Polypropylene Composites: Effect of Gamma Radiation, Polymer Plastic Technology and Engineering, 48(5): 542-548.
34.
Khan, M.A., Khan, R.A., Zaman, H.U. and Noor-A Alam, M. ( 2009). Effect of Surface Modification of Jute with Acrylic Monomers on the Performance of Polypropylene Composites, Journal of Reinforced Plastics and Composites. Available at: http://jrp.sagepub.com/cgi/content/abstract/0731684409103147v1 . Published Online on 21 May.
