Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 10 wt% of ethylene octene copolymer (POE) and different loading (2–6 wt%) of organophilic modified monmorillonite (MMT, organocaly) are prepared using a twin screw extruder followed by injection molding. Polypropylene grafted maleic anhydride (PP-g-MAH) of 5 wt% is also incorporated as a compatibilizer. The mechanical properties of blended nanocomposites are studied through tensile, flexural, and impact tests. The morphology, essentially comprised of PP and POE particles dispersed in the PA6 matrix, is characterized by scanning electron microscopy (SEM). Wide angle X-ray diffraction (XRD) is used to characterize the formation of nanocomposites. The thermal properties are characterized by using differential scanning calorimeter (DSC) and thermogravimetry analysis (TGA). The dynamic mechanical properties of the PA6/PP blend and PA6/PP/POE nanocomposites are analyzed by using a dynamic mechanical thermal analyzer (DMTA). The incorporation of organoclay does not influence the melting temperature or crystallinity of PA6 or PP. However, the thermal stability of the nanocomposites improved by about 20 C with the incorporation of 2–4 wt% organoclay. The PA6/PP nanocomposites containing 4 wt% of organoclay and 10 wt% of POE exhibit good toughness retention without significant loss of stiffness and strength properties.
Campoy, I. , Arribas, J.M. , Zaporta, M.A.M. , Marca, C. , Gomez, M.A. and Fatou, J.G. (1995). Crystallization Kinetics of Polypropylene-Polyamide Compatibilized Blends , European Polymer Journal, 31(5): 475,–480 .
2.
Ohlsson, B. , Hassander, H. and Tornell, B. (1998). Effect of the Mixing Procedure on the Morphology and Properties of Compatibilized Polypropylene/Polyamide Blends , Polymer, 39(16): 4715–4721 .
3.
Ohlsson, B. , Hassander, H. and Tornell, B. (1997). Improved Compatibility between Polyamide and Polypropylene by the use of Maleic Anhydride Grafted SEBS , Polymer, 39(26): 6705–6714 .
4.
Tedesco, A. , Krey, F.C. , Barbosa, R.V. and Mauler, R.S. (2001). Effect of Type of Nylon Chain-end on the Compatibilization of PP/PP-GMA/Nylon 6 Blends , Polymer International, 51(2): 105–110 .
5.
Tucker, J.D. , Lee, S. and Einsporn, R.L. (2000). A Study of the Effect of PP-g-MAH and SEBS-g-MA on the Mechanical and Morphological Properties of Polypropylene/Nylon 6 Blends , Polymer Engineering and Science, 40(12): 2577–2589 .
6.
Holsti-Miettinen, R.M. , Seppala, J.V. , Ikkala, O.T. and Reima, I.T. (1997). Functionalized Elastomeric Compatibilizer in PA6/PP Blends and Binary Interaction between Compatibilizer and Polymer , Polymer Engineering and Science, 34(5): 395–404 .
7.
Montiel, A.G. , Keskkula, H. and Paul, D.R. (1995). Impact-modified Nylon 6/ Polypropylene Blends: 2. Effect of Reactive Functionality on Morphology and Mechanical Properties , Polymer, 36(24): 4605–4620 .
Piglowski, J. , Gancarz, I. , Wlazlak, M. , and Kammer, H.W. (2000). Crystallization in Modified Blends of Polyamide and Polypropylene , Polymer, 41(18): 6813–6824 .
11.
Wong, S.C. and Mai, Y.W. (1998). Effect of Rubber Functionality on Microstructures and Fracture Toughness of Impact-Modified Nylon6,6/Polypropylene Blends: 1. Structure-Property Relationships , Polymer, 40(6): 1553–1566 .
12.
Bai, S.L. and Wang, M. (2003). Plastic Damage Mechanisms of Polypropylene/Polyamide 6/ Polyethylene Octane Elastomer Blends under Cyclic Tension , Polymer, 44(21): 6537–6547 .
13.
Bai, S.L. , Wang, G.T. , Hiver, J.M. and G'sell, C. (2004). Microstructures and Mechanical Properties of Polypropylene/Polyamide 5/Polvethelene-Octene Elastomer Blends , Polymer, 45(9): 3063–3071 .
14.
Zeng, N. , Bai, S.L. , Sell, C.G. , Hiver, J.-M. and Mai, Y.W. (2002). Study on the Microstructures and Mechanical behaviour of Compatibilized Polypropylene/Polyamide-6 Blends , Polymer International, 51(12): 1439–1447 .
15.
Wahit, M.U. , Ishak, Z.A.M. , Hassan, A. , Lim, J.W. and Bakar, A.A. (2005). The Effect of Polyethylene-Octene on the Morphological and Mechanical Properties of Polyamide 6/Polypropylene , Polymer and Polymer Composites, Nanocomposites, 13(8): 795–806 .
16.
Harmia, T. and Friedrich, K. (1995). Fracture Toughness and Failure Mechanisms in Unreinforced and Long-Glass-Fiber-Reinforced PA66/PP Blends , Composites Science and Technology, 53(4): 423–430 .
17.
Saad, A.L.G. and Younan, A.F. (1995). Rheological, Mechanical and Electrical Properties of Natural Rubber-White Filler Mixtures Reinforced with Nylon 6 Short Fibers , Polymer Degradation and Stability, 50(2): 133–140 .
18.
Laura, D.M. , Keskkula, H. , Barlow, J.W. and Paul, D.R. (2002). Effect of Glass Fiber Surface Chemistry on the Mechanical Properties of Glass Fiber Reinforced, Rubber-Toughened Nylon 6 , Polymer, 43(17): 4673–4687 .
19.
Laura, D.M. , Keskkula, H. , Barlow, J.W. and Paul, D.R. (2003). Effect of Rubber Particle Size and Rubber Type on the Mechanical Properties of Glass Fiber Reinforced, Rubber-Toughened Nylon 6 , Polymer, 44(11): 3347–3361 .
20.
Alexandra, M. and Dubois, P. (2000). Polymer-layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials , Materials Science and Engineering, 28(1–2): 1–63 .
21.
Ray, S.S. and Okamoto, M. (2003). Polymer/layered Silicate Nanocomposites: A Review from Preparation to Processing , Prog. Polym. Sci., 28(11): 1539–1641 .
22.
Liu, T.X. , Liu, Z.H. , Ma, K.X. , Shen, L. , Zeng, K.Y. and He, C.B. (2003). Morphology, Thermal and Mechanical Behavior of Polyamide 6/Layered-Silicate Nanocomposites , Composites Science and Technology, 63(3–4): 331–337 .
23.
Nair, S.V.Goettler, L.A. and Lysek, B.A. (2002). Toughness of Nanoscale and Multiscale Polyamide-6,6 Composites , Polymer Engineering and Science, 42(9): 1872–1882 .
24.
Hasegawa, N. , Okamoto, H. , Kato, M. , Usuki, A. and Sato, N. (2003). Nylon 6/Na-Montmorillonite Nanocomposites Prepared by Compounding Nylon 6 with Na-Montmorillonite Slurry , Polymer, 44(10): 2933–2937 .
25.
Kaempfer, D. , Thomann, R. and Mulhaupt, R. (2002). Melt Compounding of Syndiotactic Polypropylene Nanocomposites containing Organophilic Layered Silicates and in situ formed Core/Shell Nanoparticles , Polymer, 43(10): 2909–2916 .
26.
Liu, X. , Wu, Q. , Berglund, L.A. , Fan, J. and Qi, Z. (2000). Polyamide 6-Clay Nanocomposites/Polypropylene-Grafted-Maleic Anhydride Alloys , Polymer, 42(19): 8235–8239 .
27.
Chow, W.S. , Ishak, Z.A. , Kocsis, J.K. , Apostolov, A.A. and Ishiaku, U.S. (2003). The Effect of Organoclay on the Mechanical Properties and Morphology of Injectionmolded Polyamide 6/Polypropylene Nanocomposites , Journal of Applied Polymer Science, 91(1): 175–189 .
28.
Chow, W.S. , Ishak, Z.A. , Kocsis, J.K. , Apostolov, A.A. and Ishiaku, U.S. (2003). Compatibilizing Effect of Maleated Polypropylene on the Mechanical Properties and Morphology of Injection Molded Polyamide 6/Polypropylene/Organoclay Nanocomposites , Polymer, 44(24): 7427–7440 .
29.
Cho, J.W. and Paul, D.R. (2001). Nylon 6 Nanocomposites by Melt Compounding , Polymer, 42(3): 1083–1094 .
30.
Reichert, P. , Hoffmann, B. , Bock, T. , Thomann, R. , Mulhaupt, R. and Friedrich, C. (2001). Morphological Stability of Poly(propylene) Nanocomposites , Macromolecule Rapid Communication, 22(7): 519–523 .
31.
Wang, H. , Zeng, C. , Elkovitch, M. and Lee, L.M. (2001). Processing and Properties of Polymeric Nanocomposites , Polymer Engineering and Science, 41(11): 2036–2046 .
32.
Pramoda, K.P. , Liu, T. , Liu, Z. , He, C. and Sue, H.J. (2003). Thermal Degradation behavior of Polyamide 6/Clay Nanocomposites , Polymer Degradation and Stability, 81(1): 47–56 .
33.
Liu, T. , Lim, K.P. , Tjiu, W.C. , Pramoda, K.P. and Chen, Z.K. (2003). Preparation and Characterization of Nylon 11/Organoclay Nanocomposites , Polymer, 44(12): 3529–3535 .
34.
Zhang, G.S. , Li, Y. , Yan, D. and Xu, Y. (2003). Nylon 1010-Montmorillonite Nanocomposites made by Interaction Polymerization , Polymer Engineering and Science, 43(1): 204–213 .
35.
Devaux, E. , Bourbigot, S. and Achari, A.E. (2002). Crystallization behavior of PA-6 Clay Nanocomposite Hybrid , Journal of Applied Polymer Science, 86(10): 2416–2423 .
36.
Mehrabzadeh, M. and Kamal, M.R. (2004). Melt Processing of PA-66/Clay, HDPE/Clay and HDPE/PA-66/Clay Nanocomposites , Polymer Engineering and Science, 44(6): 1152–1161 .
37.
Fornes, T.D. and Paul, D.R. (2003). Crystallization behavior of Nylon 6 Nanocomposites , Polymer, 44(14): 3945–3961 .
38.
Xu, W. , Ge, M. and He, P. (2002). Nonisothermal Crystallization Kinetics of Polypropylene/Montmorillonite Nanocomposites , Journal of Polymer Science: Part B: Polymer Physics, 40(5): 408–414 .
39.
Wang, H. , Zeng, C. , Elkovitch, M. , Lee, J. and Koelling, K.W. (2001). Processing and Properties of Polymeric Nanocomposites , Polymer Engineering and Science, 41(11): 2036–2046 .
40.
Chow, W.S. , Mohd Ishak, Z.A. and Karger-Kocsis, J. (2003) Atomic Force Microscopy Study on Blend Morphology and Clay Dispersion in PA6/PP/Organoclay System , Journal of Polymer Science Part B: Polymer Physics, 43(10): 1198–1204 .
