In Situ Formation of Strain Sensors by Breaking Optical Fibers in Structural Materials

Abstract

This article describes the formation of strain sensors embedded in a matrix material by breaking a notched optical fiber in the matrix. When a specimen with an embedded optical fiber with a notch is tensile tested, fracture of the fiber at the notch occurs, producing an optical interference type strain sensor. During the formation process optical transmission loss is recorded. The case of multiply notched optical fibers is also considered and it is shown that the optical loss of the embedded optical fiber during tensile test increases with the number of breaks. Using bending, instead of tension, to form the sensor, allows a reduction of break pitch and consequently improves the local nature of the sensor. The multiple fractured type optical fiber sensor has also been used on an active laminate to monitor its curvature change during actuation.

Keywords

smart material optical fiber composite strain sensor active material

References

Chang, F.K. (2002). Ultra Reliable and Super Safe Structures for the New Century , In: Proceedings of the First European Workshop on Structural Health Monitoring, Paris, July 10–12, pp. 3–12 .

Balageas, D.L. (2001). Structural Health Monitoring R&D at the European Research Establishment in Aerospace (EREA) , In: Proceedings of the 3rd International Workshop on Structural Health Monitoring: The Demand and Challenges, Stanford, September 12–14, pp. 12–29 .

Chang, P.C. and Flatau, A. (2002). Health Monitoring of Civil Infrastructure , In: Proceedings of the First European Workshop on Structural Health Monitoring, Paris, July 10–12, pp. 21–30 .

Alper, J.M. (1991). Structural Damage Detection for Smart Structures , In: Proceedings of Optical Sensors in the Control of Flexible Structures, sponsored by Virginia Tech, Blacksburg, VA, April 3–4 pp. 102–113 .

Benussi, L. , Berardis, S. , Bertani, M. , Bianco, S. , Caponero, M.A. , Colonna, D. , Fabbri, F.L. , Felli, F. , Giardoni, M. , La Monaca, A. , Ortenzi, B. , Pace, E. , Pallotta, M. , Paolozzi, A. and Tomassini, S. (2003). Fiber Optic Sensors for Space Missions , IEEE Aerospace Conference, March, Montana, USA.

Mrad, N. , Melton, R.G. and Kulakowski, B.T. (1997). Performance of Optical Sensors in the Control of Flexible Structures , Journal of Intelligent Materials System and Structures, 8(11): 920–929 .

Berkoff, T.A. , Kersey, A.D. and Friebele, E.J. (1991). Absolute Strain Sensing Using Fiber Interferometry , In: Proceedings of Conference on Optical Fiber Sensor Based Smart Materials and Structures, sponsored by Virginia Tech, Blacksburg, VA, April 3–4, pp. 21–28 .

Ghandi, M.V. and Thompson, B.S. (1992). Smart Materials and Structures, Chapman & Hall, New York .

Udd, E. (1995). Fiber Optic Smart Structures, John Wiley & Sons, Inc., New York .

10.

Felli, F. , Paolozzi., A. and Caponero, M.A. (2000). Fabrication of Intelligent Aluminum Matrix Composite , Aluminum Transaction, 2: 189–194 .

11.

Paolozzi, A. , Caponero, M.A. , Felli, F. , Tului, M. and Valente, T. (2000). Preliminary Tests for an Intelligent Thermal Protection System for Space Vehicles , In: Proc. of SPIE, Smart Materials, Vol. 4234, Melbourne, Australia, Dec. 2000, pp. 160–167 .

12.

Brotzu, A. , Caponero, M.A. , Colonna, D. , Felli, F. , Paolozzi, A. and Peroni, I. (2005). Environmental Tests on a Reinforced Concrete with Embedded FBG Sensors , In: 2nd JSME-ASME Int. Conf. on Materials & Processing 2005 13th JSME Materials & Processing Conf., Seattle, WA, USA, June 19–22.

13.

Asanuma, H. and Kurihara, H. (1999). Possibility of Sensor Formation by Fracture of Pre-notched Optical Fiber in Matrix Materials , In: Dynamics and Design Conference, JSME, Vol. B, pp. 524–526 .

14.

Asanuma, H. (2002). Formation of Sensitive/Active Phases in Metal and Polymer Based Structural Materials , In: Proceedings of the SPIE: The International Society for Optical Engineering, 4934: 96–109 .

15.

Asanuma, H. , Haga, O. , Naito, N. and Tsuchiya, T. (1996). Development of an Actuator Utilizing Thermal Deformation of Ply Composites , Proc. Japan Society for Composite Materials, 19–20 .