A Numerical and Experimental Study on Thermal Conductivity of Particle Filled Polymer Composites

Abstract

In this study, thermal conductivity of particle filled polymer composites is investigated numerically and experimentally. In the numerical study, the finite-element program ANSYS is used to calculate the thermal conductivity of the composite by using the results of the thermal analysis. Three-dimensional models are used to simulate the microstructure of composite materials for various filler concentrations at various ratios of thermal conductivities of filler to matrix material. The models used to simulate particle filled composite materials are cubes in a cube lattice array and spheres in a cube lattice array. A modified hot wire method is used to measure the thermal conductivity of the composites consisting of a high-density polyethylene (HDPE) matrix filled with tin particles up to 16% by volume. The experimentally measured thermal conductivities are compared with numerically calculated ones by using the spheres in cube model and also with the already existing theoretical and empirical models. At low particle content, up to 10% of volume content of tin filler, numerical estimation and all other models except for the Cheng and Vachon model, predict well the thermal conductivity of the composite. For more heavily filled composites there is an exponential increase in thermal conductivity and most of the models fail to predict thermal conductivity in this region.

Keywords

polymer composite thermal conductivity finite-element analysis particle filled

References

Hennig, J. and Knappe, W. (1964). Anisotropy of Thermal Conductivity in Stretched Amorphous Linear Polymers and in Strained Elastomers , Journal of Polymer Science Part C, 6: 167–174 .

Hansen, D. and Ho, C. (1965). Thermal Conductivity of High Polymers , Journal of Polymer Science Part A, 3(2): 659–670 .

Peng, S. and Landel, R. (1975). Induced Anisotropy of Thermal Conductivity of Polymer Solids under Large Strains , Journal of Applied Polymer Science, 19(1): 49–68 .

Choy, C.L. and Young, K. (1977). Thermal Conductivity of Semicrystalline Polymers–A Model , Polymer, 18(8): 769–776 .

Tavman, I. (1991). Thermal Anisotropy of Polymers as a Function of their Molecular Orientation, Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics, pp. 1562–1568, Elsevier.

Griesinger, A. , Hurler, W. and Pietralla, M. (1997). A Photothermal Method with Step Heating for Measuring the Thermal Diffusivity of Anisotropic Solids , International Journal of Heat and Mass Transfer, 40(13): 3049–3058 .

Wong, C.P. and Bollampally, R.S. (1999). Thermally Conductivity, Elastic Modulus, and Coefficient of Thermal Expansion of Polymer Composites Filled with Ceramic Particles for Electronic Packaging , Journal of Applied Polymer Science, 74(14): 3396–3403 .

Lu, X. and Xu, G. (1997). Thermally Conductive Polymer Composites for Electronic Packaging , Journal of Applied Polymer Science, 65(13): 2733–2738 .

Xu, Y. , Chung, D.D.L. and Mroz, C. (2001). Thermally Conducting Aluminum Nitride Polymer-matrix Composites , Composites: Part A, 32(12): 1749–1757 .

10.

Mamunya, Y.P. , Davydenko, V.V. , Pissis, P. and Lebedev, E.V. (2002). Electrical and Thermal Conductivity of Polymers Filled with Metal Powders , European Polymer Journal, 38(9): 1887–1897 .

11.

Saxena, N.S. , Pradeep, P. , Mathew, G. , Thomas, S. , Gustafsson, M. and Gustafsson, S.E. (1999). Thermal Conductivity of Styrene Butadiene Rubber Compounds with Natural Rubber Prophylactics Waste as Filler , European Polymer Journal, 35(9): 1687–1693 .

12.

Ishida, H. and Rimdusit, S. (1998). Very High Thermal Conductivity Obtained by Boron Nitride-filled Polybenzoxazine , Thermochimica Acta, 32(1–2): 177–186 .

13.

Tavman, I.T. (1997). Thermal and Mechanical Properties of Copper Powder Filled Poly (ethylene) Composites , Powder Technology, 91(1): 63–67 .

14.

Bjorneklett, A. , Halbo, L. and Kristiansen, H. (1992). Thermal Conductivity of Epoxy Adhesives Filled with Silver Particles , International Journal of Adhesion and Adhesives, 12(2): 99–104 .

15.

Agari, Y. , Ueda, A. , Tanaka, M. and Nagai, S. (1990). Thermal Conductivity of a Polymer Filled with Particles in the Wide Range from Low to Super-high Volume Content , Journal of Applied Polymer Science, 40(5–6): 929–941 .

16.

Kumlutas, D. , Tavman, I.H. and Coban, M.T. (2003). Thermal Conductivity of Particle Filled Polyethylene Composite Materials , Composites Science and Technology, 63(1): 113–117 .

17.

Veyret, D. , Cioulachtjian, S. , Tadrist, L. and Pantaloni, J. (1993). Effective Thermal Conductivity of a Composite Material: A Numerical Approach , Transactions of the ASME Journal of Heat Transfer, 115: 866–871 .

18.

Mottram, J.T. and Taylor, R. (1987). Thermal Conductivity of Fibre/Phenolic Resin Composites. Part II: Numerical Evaluation , Composites Science and Technology, 29(3): 211–232 .

19.

Onyejekwe, O.O. (2002). Heat Conduction in Composite Media: A Boundary Integral Approach , Computers & Chemical Engineering, 26(11): 1621–1632 .

20.

Tavman, I.H. (1996). Thermal and Mechanical Properties of Aluminum Powder filled High-density Polyethylene Composites , Journal of Applied Polymer Science, 62(12): 2161–2167 .

21.

Sofian, N.M. , Rusu, M. , Neagu, R. and Neagu, E. (2001). Metal Powder-filled Polyethylene Composites. V. Thermal Properties , Journal of Thermoplastic Composite Materials, 14(1): 20–33 .

22.

Tekce, H.S. , Kumlutas, D. and Tavman, I.H. (2004). Determination of the Thermal Properties of Polyamide-6 (Nylon-6)/Copper Composite by Hot Disk Method , In: Proceedings of the 10th Denizli Material Symposium, Denizli, April 2004, pp. 296–304 .

23.

Weidenfeller, B. , Hofer, M. and Schilling, F.R. (2004). Thermal Conductivity, Thermal Diffusivity, and Specific Heat Capacity of Particle Filled Polypropylene , Composites Part A: Applied Science and Manufacturing, 35(4): 423–429 .

24.

Ott, H.J. (1981). Thermal Conductivity of Composite Materials , Plastic and Rubber Processing and Application, 1(1): 9–24 .

25.

Progelhof, R.C. , Throne, J.L. and Ruetsch, R.R. (1976). Methods of Predicting the Thermal Conductivity of Composite Systems , Polymer Engineering and Science, 16(9): 615–625 .

26.

Tsao, T.N.G. (1961). Thermal Conductivity of Two Phase Materials , Industrial and Engineering Chemistry, 53(5): 395–397 .

27.

Cheng, S.C. and Vachon, R.I. (1969). The Prediction of the Thermal Conductivity of Two and Three Phase Solid Heterogeneous Mixtures , International Journal of Heat Mass Transfer, 12(3): 249–264 .

28.

Lewis, T. and Nielsen, L. (1970). Dynamic Mechanical Properties of Particulate-filled Polymers , Journal of Applied Polymer Science, 14(6): 1449–1471 .

29.

Halpin, J.C. (1969). Stiffness and Expansion Estimates for Oriented Short Fiber Composites , Journal of Composite Materials, 3(1): 732–734 .

30.

Maxwell, J.C. (1954). A Treatise on Electricity and Magnetism, 3rd edn, Ch.9. Dover Inc., New York, NY .

31.

Agari, Y. and Uno, T. (1986). Estimation on Thermal Conductivities of Filled Polymers , Journal of Applied Polymer Science, 32(7): 5705–5712 .

32.

Agari, Y. , Ueda, A. and Nagai, S. (1991). Thermal Conductivity of Polyethylene Filled with Disoriented Short-cut Carbon Fibers , Journal of Applied Polymer Composite Science, 43(6): 1117–1124 .