Metal Filled High Density Polyethylene Composites – Electrical and Tensile Properties

Abstract

The electrical resistivity and tensile properties of composites formed by the incorporation of metal powders such as aluminum (Al), copper (Cu), and iron (Fe) in a high-density polyethylene (HDPE) matrix are investigated. Results are presented for metal fillers content varying between 0 and 55% by volume. The effect of different types of filler and filler content on electrical and tensile properties of the composites is analyzed. As a result, it is found that the electrical resistivity properties of the composites are governed by the shape of the filler and the amount of filler content. In this study, it is found that the tensile strength is influenced by the shape of the filler, degree of crystallinity and the adhesion between metal fillers and polymer. For example, more metal filler loading results in filler agglomeration which reduces the adhesion between metal fillers and polymer and increases the metal-to-metal contacts, this subsequently reduces the strength of the composite materials. The Young's modulus of the composite systems seems to follow the normal trend of filled polymer composites, where in general the Young's modulus increases with increasing amount of filler loadings.

Keywords

metal filled polyethylene electrical resistivity metal fillers tensile properties

References

Bhattacharya, S.K. (1986). Metal Filled Polymers (Properties and Application), editor, pp. 17–41, Marcel Dekker, Inc., New York . Figure [1] reprinted with the permission of Taylor and Francis.

Mamunya, Y.P. , Davydenko, V.V. , Pissis, P. and Lebedev, E.V. (2002). Electrical and Thermal Conductivity of Polymers Filled with Metal Powders , European Polymer Journal, 38: 1887–1897 .

Rusu, M. , Sofian, N. and Rusu, D. (2001). Mechanical and Thermal Properties of Zinc Powder Filled High Density Polyethylene Composites , Polymer Testing, 20: 407–417 .

Kalyon, D.M. , Birinci, E. , Yazici, R. , Karuz, B. and Karuz, B. (2002). Electrical Properties of Composites as Affected by the Degree of Mixedness of The Conductive Filler in the Polymer Matrix , Polymer Engineering and Science, 42(7): 1609–1618 .

Bigg, D.M. (1986). Electrical Properties of Metal-filled Polymer Composites, Metal Filled Polymers (Properties and Application), pp. 165–222, Marcel Dekker, Inc., New York .

Hashin, Z. and Shtrikman, A. (1962). A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Material , J. Appl. Phys., 33: 3125–3131 .

Mamunya, Y.P. , Zois, H. , Apekis, L. and Lebedev, E.V. (2004). Influence of Pressure on the Electrical Conductivity of Metal Powders used as Fillers in Polymer Composites , Powder Technology, 140: 49–55 .

Strong, A.B. (1996). PLASTICS Materials and Processing, 2nd edn, pp. 210–211, Brigham Young University, Prentice Hall .

Song, T.T. , Ming, Q.Z. , Min, Z.R. , Han, M.Z. and Fang, M.Z. (2001). Properties of Metal Fiber Filled Thermoplastics as Candidates for Electromagnetic Interference Shielding , Polymer & Polymer Composites, 9(4): 257–264 .

10.

Jang, J. and Han, S. (1999). Mechanical Properties of Glass-fiber Mat/PMMA Functionally Gradient Composites, Composite: Part A : Applied Science and Manufacturing, 30: 1045–1053 .

11.

Hull, D. (1992). An Introduction to Composites Material, pp. 1–20, University Press, Cambridge .