Carbon-Fiber Reinforced Thermoplastic Materials for Rigidizable Space Systems

Abstract

This paper describes the results obtained from a research program performed to develop thermoplastic-based composites specifically designed for deployment in low Earth orbit through inflation of compact structures followed by rigidization. For the past few years, ILC has been developing lightweight, low bulk, inflatable, rigidizable strut systems for erecting large structures in space. The composite system currently used in the development programs is a thermoset matrix (low offgassing epoxy) with carbon reinforcement. Such systems have high power requirements for erection and curing, have limited shelf life before deployment, and contain low-molecular-weight species that can result in significant offgassing. Thermoplastic systems eliminate shelf-life constraints, can potentially reduce energy requirements, and should reduce offgassing. Such systems, however, must provide equivalent mechanical performance and energy requirements if they are to be a viable alternative to the currently used material system.

In the research described in this paper, a number of thermoplastic systems were evaluated in conjunction with 1 k tow T300 plain-weave carbon fabric as reinforcement. Three thermoplastic resin candidates were selected: polypropylene (PP), high-density polyethylene (HDPE), and glycol-modified polyester terephthalate (PETG). This selection was based on the physical, mechanical, and thermal properties of the systems as well as the commercial availability of these systems in thin sheets.

References

1. Cadogan, D. (2001). Rigidization Mechanisms and Materials, Chapter 13 in Gossamer Spacecraft: Membrane and Inflatable Structures Technology for Space Applications, Progress in Astronautics and Aeronautics, publ. by AIAA.

2. Silverman, E.M. , Wiacek, C.R. and Griese, R.A. (1990). Characterization of IM7 Graphite/Thermoplastic Polyetheretherketone (PEEK) for Spacecraft Structural Applications, In: Proceedings of 10th Conf. on Composite Materials: Testing and Design, pp. 118-130, publ. by ASTM, Philadelphia.

3. Silverman, E.M. , Griese, R.A. and Wright, W.F. (1989). Graphite and Kevlar Thermoplastic Composite for Spacecraft Applications. In: Proceedings of 34th Int. SAMPE Symposium, pp. 770-779, publ. by SAMPE, Covina CA.

4. Jones, J.A. and Wu, J.J. (1999). Inflatable Rovers for Planetary Applications, In: Proceedings of the International Society for Optical Engineering 1999 Mobile Robots, pp. 63-68, Sponsored by Society of Photo-Optical Instrumentation Engineering, Bellingham WA.

5. Carreras, R.A. , Marker, D.K. , Rotge, J.R. , Wilkes, J.M. and Duneman, D. (1999). Deployable Near-Net Shape Membrane Optics, In: Proceedings of The International Society for Optical Engineering High-Resolution Wavefront Control, pp. 232-238, Sponsored by Society of Photo-Optical Instrumentation Engineering, Bellingham WA.

6. Rawal, S.P. , Barnett, D.M. and Kustas, F.M. (1999). Multifunctional Composite Structures Designs, In: Proceedings of 31st Int. SAMPE Technical Conf., pp. 307-318, publ. by SAMPE, Covina CA.

7. Christiansen, E.L. , Kerr, J.H. , De La Fuente, H.M. and Schneider, W.C. (1998). Flexible and Deployable Meteorid/Debris Shielding for Spacecraft, Int. Journal of Impact Engineering, publ. by Elsevier, 125-136.