Magnesium alloys have been widely investigated as biodegradable cardiovascular temporal implants due to their better mechanical properties and biocompatibility, but the rapid degradation limited its application. In this study, the anodic oxidation-Cu structure was used to improve the adhesive strength and stability between poly-β-hydroxybutyrate (PHB) and magnesium alloys, and the effects of anodic oxidation magnesium alloys with copper film and PHB film (MACP) on human umbilical vein endothelial cells (HUVECs), blood compatibility and antibacterial properties were investigated in this research. As the result, the MACP structure had a stable structure and better corrosion resistance, and significant antibacterial properties. The coating would not affect the original excellent biocompatibility of the magnesium alloy. It was indicated that MACP was a potential surface modification strategy for vascular stents candidate material.
GargSSerruysPW.Coronary stents current status. J Am Coll Cardiol2010;
56: S1–S42.
2.
LabarrereCADabiriAEKassabGS.Thrombogenic and inflammatory reactions to biomaterials in medical devices. Front Bioeng Biotechnol2020;
8: 18.
3.
ZhangKLiJADengK, et al.
The endothelialization and hemocompatibility of the functional multilayer on titanium surface constructed with type IV collagen and heparin. Colloids Surf B Biointerfaces2013;
108: 295–304.
4.
Echeverry-RendonMAllainJPRobledoSM, et al.
Coatings for biodegradable magnesium-based supports for therapy of vascular disease: a general view. Mater Sci Eng C Mater Biol Appl2019;
102: 150–163.
5.
ReimersBMoussaIAkiyamaT, et al.
Long-term clinical follow-up after successful repeat percutaneous intervention for stent restenosis. J Am Coll Cardiol1997;
30: 186–192.
6.
BowenPKShearierERZhaoS, et al.
Biodegradable metals for cardiovascular stents: from clinical concerns to recent Zn-alloys. Adv Healthc Mater2016;
5: 1121–1140.
7.
AdhikariURijalNPKhanalS, et al.
Magnesium incorporated chitosan based scaffolds for tissue engineering applications. Bioact Mater2016;
1: 132–139.
8.
GuXZhengYChengY, et al.
In vitro corrosion and biocompatibility of binary magnesium alloys. Biomaterials2009;
30: 484–498.
9.
AgarwalSCurtinJDuffyB, et al.
Biodegradable magnesium alloys for orthopaedic applications: a review on corrosion, biocompatibility and surface modifications. Mater Sci Eng C Mater Biol Appl2016;
68: 948–963.
10.
Abdal-HayADewidarMLimJ, et al.
Enhanced biocorrosion resistance of surface modified magnesium alloys using inorganic/organic composite layer for biomedical applications. Ceram Int2014;
40: 2237–2247.
11.
SuWLiWWuZ, et al.
Chemical surface modification of polymeric biomaterials for biomedical applications. Macromol Rapid Commun2020;
41: 1900430.
12.
HungH-SHsuS-H.Surface modification by nanobiomaterials for vascular tissue engineering applications. Curr Med Chem2020;
27: 1634–1646.
13.
RazaZARiazSBanatIM.Polyhydroxyalkanoates: properties and chemical modification approaches for their functionalization. Biotechnol Prog2018;
34: 29–41.
14.
GoonooNBhaw-LuximonAPassanhaP, et al.
Third generation poly(hydroxyacid) composite scaffolds for tissue engineering. J Biomed Mater Res B Appl Biomater2017;
105: 1667–1684.
15.
DarisBKnezZ.Poly(3-hydroxybutyrate): promising biomaterial for bone tissue engineering. Acta Pharm2020;
70: 1–15.
16.
MaXLvYGaoZ, et al. Surface modification of biomedical magnesium alloys by PHB. In: Jiao S, Jiang ZY, Bu JL (eds) Advances in Superalloys, Pts 1 and 2. Advanced Materials Research, 2011, pp. 146–147, 1170–1173.
17.
LiHPanHNingC, et al.
Magnesium with micro-arc oxidation coating and polymeric membrane: an in vitro study on microenvironment. J Mater Sci Mater Med2015;
26: 147.
18.
LiangQShupingGChenyuL, et al.
Impact of a bioactive drug coating on the biocompatibility of magnesium alloys. Journal of Materials Science2020;
55: 6051–6064.
19.
HuangJXuLZhaoD, et al.
A facile process to fabricate metal coating on PET sheet: preparation of highly active polymer brush/Ag particle and its application in electroless copper plating. Chem Eng J2020;
383: 123199.
20.
GuoY-yChengM-qChenD-s, et al.
In vitro corrosion resistance and cytotoxicity of novel TiNbTaZr alloy. Trans Nonferrous Metals Soc China2012;
22: S175–S80.
21.
GholamiMMhaedeMPastorekF, et al.
Corrosion behavior and mechanical properties of ultrafine-grained pure copper with potential as a biomaterial. Adv Eng Mater2016;
18: 615–623.
22.
KwaanHC.Complications of implanted nonbiologic devices – an overview. Semin Thromb Hemost2018;
44: 7–11.
23.
ZouYHZengRCWangQZ, et al.
Blood compatibility of zinc-calcium phosphate conversion coating on Mg-1.33Li-0.6Ca alloy. Front Mater Sci2016;
10: 281–289.
24.
MaitzMFMartinsMCLGrabowN, et al.
The blood compatibility challenge. Part 4: surface modification for hemocompatible materials: passive and active approaches to guide blood-material interactions. Acta Biomater2019;
94: 33–43.
25.
OuyangCTengCM.Invivo effects of purified thrombin-like and anticoagulant principles of Agkistrodon acutus (hundred pace snake) venom. Toxicon1978;
16: 583–593.
26.
GruberAHansonSR.Antithrombotic factor XI antibody inhibition of the intrinsic pathway. Blood2001;
98: 42A–42A.
27.
HafnerGRoserMNauckM.Methods for the monitoring of direct thrombin inhibitors. Semin Thromb Hemost2002;
28: 425–430.
28.
CorrêaMCSRezendeMLRosaDS, et al.
Surface composition and morphology of poly(3-hydroxybutyrate) exposed to biodegradation. Polym Testing2008;
27: 447–452.
29.
SunDSBrantleyWAFrankelGS, et al.
Potentiodynamic polarization study of the corrosion behavior of palladium-silver dental alloys. J Prosth Dentist2018;
119: 650–656.
30.
LotoRT.Potentiodynamic polarization studies of the pitting corrosion resistance and passivation behavior of P4 low carbon mold steel in chloride and acid chloride solution. Mater Res Express2018;
5: 116509.
31.
ZhengWYDerushieCLoJ. Protection of Mg alloys against galvanic and other forms of corrosion. In: Ke W, Han EH, Han YF, et al. (eds) Magnesium – Science, Technology and Applications. Materials Science Forum, 2005, 488–489, 787–791. Materials Science Forum.
32.
LiZXuH.Study on galvanic corrosion of AZ80 alloy and other alloys. Hot Working Technol2014;
43: 53–56.
33.
NanLXuDGuT, et al.
Microbiological influenced corrosion resistance characteristics of a 304L-Cu stainless steel against Escherichia coli. Mater Sci Eng C Mater Biol Appl2015;
48: 228–234.
34.
MaY-LGuoT.Preparation of Cu(2+)-loaded montmorillonite and its bactericidal mechanism against Escherichia coli. Yao Xue Xue Bao = Bao2007;
42: 318–322.
35.
SafariNToroghinejadMRKharazihaM.Influence of copper on the structural, mechanical, and biological characteristics of Mg-1Al-Cu alloy. Mater Chem Phys2019;
237: 121838.
36.
GorbetMSperlingCMaitzMF, et al.
The blood compatibility challenge. Part 3: Material associated activation of blood cascades and cells. Acta Biomater2019;
94: 25–32.
37.
WiegandCHiplerU-C.Methods for the measurement of cell and tissue compatibility including tissue regeneration processes. GMS Krankenhhyg Interdiszip2008;
3: Doc12.
38.
NiinomiM.Design and development of metallic biomaterials with biological and mechanical biocompatibility. J Biomed Mater Res A2019;
107: 944–954.
39.
YuXHuangWZhaoD, et al.
Study of engineered low-modulus Mg/PLLA composites as potential orthopaedic implants: an in vitro and in vivo study. Colloids Surf B Biointerfaces2019;
174: 280–290.
40.
LinXTanLWangQ, et al.
In vivo degradation and tissue compatibility of ZK60 magnesium alloy with micro-arc oxidation coating in a transcortical model. Mater Sci Eng C Mater Biol Appl2013;
33: 3881–3888.
41.
LeddaMDeBABertaniFR, et al.
Interdisciplinary approach to cell-biomaterial interactions: biocompatibility and cell friendly characteristics of RKKP glass-ceramic coatings on titanium. Biomed Mater2015;
10: 7.
