Abstract
Melt electrowriting (MEW) can print high-resolution scaffolds with the ultrafine fibers from 800 nm to 20 µm. However, the cell seeding efficiency relatively low due to the large pore size of the MEW scaffold. Here, we reported a method to solve this dilemma by electrospinning a gelatin methacrylate (GelMA) hydrogel fibers membrane (HFM) on the MEW scaffold. This composite scaffold can own the controlled structures and porosity and excellent cell seeding performance. We systematically investigate the fabrication, morphology, and biocompatibility of composite scaffolds. The implanting of human umbilical vein endothelial cells(HUVES) showed excellent adhesion and biocompatibility on the composite scaffold. Moreover, the cells migrated gradually into the MEW scaffold along the GelMA HFM to form the cell sheet. We hold the opinion that the composite scaffolds have potential applications in the field of tissue engineering repair.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
