This study reports the results of the characterization of cellulose acetate butyrate and polycaprolactone-triol blends in terms of miscibility, swelling capacity, mechanical properties, and inflammatory response in vivo. The cellulose acetate butyrate film was opaque and rigid, with glass transition (Tg) at 134℃ and melting temperature of 156℃. The cellulose acetate butyrate/polycaprolactone-triol films were transparent up to a polycaprolactone-triol content of 60%. Tg of the cellulose acetate butyrate films decreased monotonically as polycaprolactone-triol was added to the blend, thus indicating miscibility. FTIR spectroscopy revealed a decrease in intramolecular hydrogen bonding in polycaprolactone-triol, whereas no hydrogen bonding was observed between cellulose acetate butyrate and –OH from polycaprolactone-triol. The increase in polycaprolactone-triol content in the blend decreased the water uptake. An increase in polycaprolactone-triol content decreased the modulus of elasticity and increased the elongation at break. A cellulose acetate butyrate/polycaprolactone-triol 70/30 blend implanted in rats showed only an acute inflammatory response 7 days after surgery. No change in inflammation mediators was observed.
SouzaGMJúniorJGMSYamashitaF. Active biodegradable films produced with blends of rice flour and poly(butylene adipate co-terephthalate): effect of potassium sorbate on film characteristics. Mater Sci Eng C Mater Biol Appl2013; 33: 3153–3159.
2.
RogovinaSAleksanyanKPrutE. Biodegradable blends of cellulose with synthetic polymers and some other polysaccharides. Eur Polym J2013; 49: 194–202.
3.
ImreBPukánszkyB. Compatibilization in bio-based and biodegradable polymer blends. Eur Polym J2013; 49: 1215–1233.
4.
LecomteFSiepmannJWaltherM. Blends of enteric and GIT-insoluble polymers used for film coating: physicochemical characterization and drug release patterns. Control Release2003; 89: 457–471.
5.
YuaBLDeanaKLibL. Polymer blends and composites from renewable resources. Prog Polym Sci2006; 31: 576–602.
6.
WangYMiguelARodriguez-PerezRL. Thermal and thermomechanical behaviour of polycaprolactone and starch/polycaprolactone blends for biomedical applications. Macromol Mater Eng2005; 290: 792–801.
7.
ShenQLiuDS. Cellulose/poly(ethylene glycol) blend and its controllable drug release behaviors in vitro. Carbohydr Polym2007; 69: 293–298.
8.
ChielliniECinelliPFernandesEG. Gelatin-based blends and composites. Morphological and thermal mechanical characterization. Biomacromolecules2001; 2: 806–811.
9.
MayerJMElionGRBuchananCM. Biodegradable blends of cellulose acetate and starch: production and properties. J Macromol Sci1995; 32: 775–785.
HoenichN. Cellulose for medical applications: past, present and future. Bioresources2006; 1: 279–280.
12.
Pacetti SD. Diffusion barrier layer for implantable devices. Patent 6,663,662, USA, 2003.
13.
DaveVWolfgangG. Cellulose-based fibres from liquid crystalline solutions. 5. Processing and morphology of CAB blends with lignin. Polymer1997; 38: 2121–2126.
14.
LeeSHYoshiokaMShiraishiN. Polymer blend of cellulose acetate butyrate and aliphatic polyestercarbonate. J Appl Polym Sci2000; 77: 2908.
15.
XingCWangHHuQ. Mechanical and thermal properties of eco-friendly polypropylene carbonate/cellulose acetate butyrate blends. Carbohydr Polym2013; 92: 1921–1927.
16.
ParkHMMisraMDrzalLT. Green nanocomposites from cellulose acetate bioplastic and clay: effect of eco-friendly triethyl citrate plasticizer. Biomacromolecules2004; 5: 2281–2288.
17.
MeierMAKanisLALimaJC. Polycaprolactonetriol as plasticizer agent for cellulose acetate films: influence of the preparation procedure and plasticizer content on the physico-chemical properties. Adv Polym Technol2004; 15: 593–600.
18.
SchmidtVSoldiV. Influence of polycaprolactonetriol addition on thermal stability of soy protein isolate based films – degradation and stability. Polymer2006; 91: 3124.
19.
KanisLAGenerosoMSoldiV. Poly(ethylene-co-methyl acrylate)/poly(caprolactone-tryol) films: characterization and mechanical properties. Lat Am J Pharm2007; 5: 700.
20.
KupczykMBocheñska-MarciniakMGórskiP. Myeloperoxidase (MPO) as a marker of neutrophil influx into nasal mucosa after recombinant IL-8 challenge. Pneumonol Alergol Pol2002; 70(11–12): 544–549.
21.
SharawyMHEl-AgamyDSShalabyAA. Protective effects of methyl palmitate against silica-induced pulmonary fibrosis in rats. Int Immunopharmacol2013; 16: 191–198.
22.
GreenLCWagnerDAGlogowskiJ. Analysis of nitrate, nitrite and nitrate in biological fluids. Anal Biochem1982; 126: 131–138.
23.
PritchardR. The transparency of crystalline polymers. Polym Eng Sci1964; 4: 66–71.
24.
FeketeEFoE. Effect of molecular interactions on the miscibility and structure of polymer blends. Eur Polym J2005; 41: 727–736.
25.
MandelkernL. Crystallization of polymers, 2nd ed. Cambridge, UK: Cambridge University Press, 2002. .
26.
PaulDRNewmanS. Polymer blend, New York, USA: Academic Press, 1978. .
LeeJBoughnerD. Mechanical properties of human pericardium. Differences in viscoelastic response when compared with canine pericardium. Circ Res1985; 57: 475–481.
29.
MonsonKLGoldsmithWBarbaroNM. Axial mechanical properties of fresh human cerebral blood vessels. J Biomech Eng2003; 125: 288–294.
30.
NakanoKSugawaraMIshiharaK. Myocardial stiffness derived from end-systolic wall stress and logarithm of reciprocal of wall thickness: contractility index independent of ventricular size. Circulation1990; 82: 1352–1361.
IvanovaEPBazakaKCrawfordRJ. New functional biomaterials for medicine and healthcare, 1st ed. Philadelphia, USA: Woodhead, 2014. .
33.
ManuelaCCMSobralAEAbilioJFN. Gi Ketotifen controlled release from cellulose acetate propionate and cellulose acetate butyrate membranes. J Mater Sci Mater Med2008; 19: 677–682.
34.
HamiduAAAliyuBABarminasJT. Studies of the swelling properties of Guna protein/cellulose biocomposites. Ind J Appl Res2013; 3: 512–514.
35.
ThuraisingamTXuYZEadieK. MAPKAPK-2 signaling is critical for cutaneous wound healing. J Investig Dermatol2010; 130: 278–286.
36.
AndersonJM. Biological responses to materials. Annu Rev Mater Res2001; 31: 81–110.
37.
MoraisJMPapadimitrakopoulosFBurgessDJ. Biomaterials/tissue interactions: possible solutions to overcome foreign body response. AAPS J2010; 12: 188–196.
38.
TakahashiK. Development and differentiation of macrophages and related cells: historical review and current concepts. J Clin Exp Hematopathol2000; 41: 1–33.
39.
AndersonJMJonesJA. Phenotypic dichotomies in the foreign body reaction. Biomaterials2007; 28: 5114–5120.
40.
AndersonJMRodriguezAChangDT. Foreign body reaction to biomaterials. Semin Immunol2008; 20: 86–100.
