In vitro 3D culture of human chondrocytes using modified ε -caprolactone scaffolds with varying hydrophilicity and porosity

Abstract

Two series of 3D scaffolds based on ε-caprolactone were synthesized. The pore size and architecture (spherical interconnected pores) was the same in all the scaffolds. In one of the series of scaffolds, made of pure ε-polycaprolactone, the volume fraction of pores varied between 60% and 85% with the main consequence of varying the interconnectivity between pores since the pore size was kept constant. The other scaffolds were prepared with copolymers made of a ε-caprolactone-based hydrophobous monomer and hydroxyethyl acrylate, as the hydrophilic component. Thus, the hydrophilicity and, presumably, the adhesion properties varied monotonously in the copolymer series while porosity was kept constant. A suspension of human chondrocytes in culture medium was injected in the 3D scaffolds and cultured in static conditions up to 28 days. SEM and immunofluorescence assays allowed characterizing cells and extracellular matrix inside the scaffolds after different culture times. To do that, cross sections of the scaffolds were observed by SEM and confocal microscopy. The quantity of cells inside the scaffolds decreases with a decrease of the volume fraction of pores, due to the lack of interconnectivity between the cavities. The scaffolds up to a 30% of hydrophilicity behave in a similar way than the hydrophobous; a further increase of the hydrophilicity rapidly decreases cell viability. In all the experiments production of collagen type I, type II, and aggrecan was found, and some cells were Ki-67 positive, showing that some cells are adhered to the pore walls and maintain their dedifferentiated phenotype even when cultured in three-dimensional conditions.