Titanium/titanium nitride (Ti/TiN) nanoscale multilayered films were deposited onto 316L stainless steel substrates by reactive magnetron sputtering using a Ti target. Coatings characterized by X-ray diffraction showed that the stack possesses centered cubic structure. The X-ray photoelectron spectroscopy survey spectra on the etched surfaces of the stack film on steel exhibited the characteristic Ti2p, N1s, and O1s peaks at the corresponding binding energies 454.5, 397.0, and 530.6 eV, respectively. Platelet adhesion experiments were carried out to examine the interaction between blood and the materials in vitro. The results indicated that the smoothness and lower isoelectric point contribute to better hemocompatibility of the Ti/TiN nanoscale multilayered coating. The biomediated synthesis of calcium hydroxylapatite (HA) was carried out on coated substrates using calcium-depositing bacteria. The observation of low corrosion current density (Icorr) for the calcium HA-coated Ti/TiN specimens in simulated body fluid confirmed their highly resistive nature under the testing condition.
HerH.H.ChuH.H.SzuJ.P.JuL.H.ChunC.C.TienL.L.. Corrosion and Cell Adhesion Behavior of Tin Coated and Ion-nitrided Titanium for Dental Applications, Appl. Surf. Sci., 2005: 244: 252–256.
2.
SundgrenJ.E. Structure and Properties of TiN Coatings, Thin Solid Films, 1985: 128: 21–44.
3.
WatariF.TamuraY.YokoyamaA.UoM.KawasakiT.. Mechanical Properties and Biocompatibility of Surface-nitrided Titanium for Abrasion Resistant Implant, Key Eng. Mater., 2004: 254/256: 873–876.
4.
CzarnowskaE.WierchonT.Maranda NieabalaA. Properties of the Surface Layers on Titanium Alloy and Their Biocompatibility in Vitro Tests, J. Mater. Proc. Technol., 1999: 190: 92–93.
5.
WanZ.N.DorrL.D.WoodstoneT.RanawatA.SongM. Effect of Stem Stiffness and Bone Stiffness on Bone Remodeling in Cemented Total Hip Replacement, J. Arthroplasty, 1999: 14: 149–159.
6.
HenchL.L. Bioceramics: From Concept to Clinic, J. Am. Ceram. Soc., 1991: 74: 1487–1510.
7.
AokiH. (1994). Medical Applications of Hydroxyapatite, St. Louis, Tokyo, Ishiyaku Euro America. Inc., pp. 1–12.
8.
LacefieldW.R. Hydroxyapatite Coatings, Ann. N.Y. Acad. Sci., 1988: 523: 72–80.
9.
LiT.T.LeeJ.H.KobayashiT.AokiH. Hydroxyapatite Coating by Dipping Method, and Bone Bonding Strength, J. Mater. Sci. Mater. Med., 1996: 7: 355–357.
10.
LocardiB.PazzagliaU.E.GabbiC.ProfiloB. Thermal Behaviour of Hydroxyapatite Intended for Medical Applications, Biomaterials, 1993: 14: 437–441.
11.
YankeeS.J.PlatkaB.J.LuckeyH.A.JohnsonW.A. (1990). Process for Fabricating HA Coatings for Biomedical Applications, Thermal Spray Research and Applications, In: Proceedings of the 3rd Annual Thermal Spray Conference, Long Beach, California, 20–25 May, p. 433–438.
12.
RaemdonckW.V.DucheyneP.MeesterP.D. Auger Electron Spectroscopic Analysis of Hydroxyapatite Coating on Titanium, J. Am. Ceram. Soc., 1986: 63: 381–384.
13.
JaffeW.L.ScottD.F. Current Concepts Review – Total hip Arthroplasty with Hydroxyapatite-coated Prostheses, J. Bone Joint Surg., 1996: 78: 1918–1934.
14.
OngJ.L.LucasL.C. Post-deposition Heat Treatments for Ion Beam Sputter Deposited Calcium Phosphate Coatings, Biomaterials, 1994: 15: 337–341.
15.
YoshinariN.OhtsukaY.DerandT. Thin Hydroxyapatite Coating Produced by the Ion Beam Dynamic Mixing Method, Biomaterials, 1994: 15: 529–535.
16.
LinJ.H.C.LiuM.L.JuC.P. Structure and Properties of Hydroxyapatite-bioactive Glass Composites Plasma Sprayed on Ti6Al4V, J. Mater. Sci. Mater. Med., 1994: 5: 279–283.
17.
BrossaF.CigadaA.ChiesaR.ParacchiniL.ConsonniC. Adhesion Properties of Plasma Sprayed Hydroxylapatite Coatings for Orthopaedic Prostheses, Biomed. Mater. Eng., 1993: 3: 127–136.
LayrolleP.ItoA.TateishiT. Sol–Gel Synthesis of Amorphous Calcium Phosphate and Sintering into Microporous Hydroxyapatite Bioceramics, J. Am. Ceram. Soc., 1998: 81: 1421–1428.
20.
MülleraF.A.MülleraL.CaillardbD.ConfortocE. Preferred Growth Orientation of Biomimetic Apatite Crystal, J. Cryst. Growth, 2007: 304: 464–471.
21.
HabibovicP.BarrèreF.ClemensA.BlitterswijkV.GrootK.D.LayrolleP. J. Am. Ceram. Soc., 2002: 85: 517–522.
TasA.C. Synthesis of Biomimetic Ca-hydroxyapatite Powders at 37°C in Synthetic Body Fluids, Biomaterials, 2000: 21: 1429–1438.
24.
YongP.MacaskieL.E.SammonsR.L.MarquisP.M. Synthesis of Nanophase Hydroxyapatite by a Serratia sp. from Waste-water Containing Inorganic Phosphate, Biotechnol. Lett., 2004: 26: 1723–1730.
25.
BlackJ. (1999). Fundamentals of Biocompatibilities, New York, Marcel Dekker, pp. 444–457.
26.
JasenJ.A.Van der WaerdenJ.P.De GrootK. Development of a New Percutaneous Access Device for Implantation in Soft Tissues, J. Biomed. Mater. Res., 1991: 25: 1535–1545.
27.
CappucinoJ.ShermanN. (2002). Microbiology: A Laboratory Manual, 6th edn, San Francisco, Benjamin Cummings, pp. 1–21.
28.
FusayamaT.KatayoriT.NomotoS. Corrosion of Gold and Amalgam Placed in Contact with Each Other, J. Dent. Res., 1963: 42: 1183–1197.
29.
ZhaoJ.GarzaE.G.LamK.JonesC.M. Comparison Study of Physical Vapor-deposited and Chemical Vapor-deposited Titanium Nitride Thin Films Using X-ray Photoelectron Spectroscopy, Appl. Surf. Sci., 2000: 158: 246–251.
30.
MusharJ.N.GordonR.G. Atmospheric Pressure Chemical Vapor Deposition of Titanium Nitride from Tetrakis(diethylamido) Titanium and Ammonia, J. Electrochem. Soc., 1996: 143: 736–744.
31.
DeenammaV.K.Mohan RaoG.BalasubramanianT.V.SanjivK. Preparation and Characterization of TiN Films by Electron Cyclotron Resonance (ECR) Sputtering for Diffusion Barrier Applications, Mater. Sci. Eng. B, 2001: 83: 242–248.
IkedaS.GillesS.ChenevierB. Electron Microscopy Analysis of the Microstructure of Ti1–xAlxN Alloy Thin Films Prepared Using a Chemical Vapour Deposition Method, Thin Solid Films, 1998: 315: 257–262.
35.
JonesM.I.McCollI.R.GrantD.M.ParkerK.G.ParkerT.L. Haemocompatibility of DLC and TiC-TiN Interlayers on Titanium, Diamond Relat. Mater., 1999: 8: 457–462.
