Resin luting agents in which bisphenol-A glycidyl dimethacrylate (Bis-GMA) and/or triethylene glycol dimethacrylate (TEGDMA) are replaced with increasing amounts of bisphenol-A ethoxylated dimethacrylate are prepared. Degree of conversion (DC), diametral tensile strength (DTS), Young’s modulus (YM), Knoop hardness (KHN), film thickness (FT), water sorption (Wsp ), and solubility are evaluated. Regression analyses investigate the substitution of each monomer. The most appreciable differences are detected when TEGDMA is replaced: decreased DC, DTS, and Wsp, and increased YM, KHN, and FT. For substitution of Bis-GMA, the only significant differences are reduced Wsp and increased YM. An ideal formulation of resin cement would make use of the three monomers.
Pazin, M.C., Moraes, R.R., Goncalves, L.S., Borges, G.A., Sinhoreti, M.A. and Correr-Sobrinho, L. ( 2008). Effects of Ceramic Thickness and Curing Unit on Light Transmission through Leucite-Reinforced Material and Polymerization of Dual-Cured Luting Agent, J. Oral Sci., 50(2): 131-136.
2.
Reges, R.V., Moraes, R.R., Correr, A.B., Sinhoreti, M.A., Correr-Sobrinho, L., Piva, E. and Nouer, P.R. ( 2008). In-Depth Polymerization of Dual-Cured Resin Cement Assessed by Hardness, J. Biomater. Appl., 23(1): 85-96.
3.
Rosenstiel, S.F., Land, M.F. and Crispin, B.J. (1998). Dental Luting Agents: A Review of the Current Literature, J. Prosthet. Dent., 80(3): 280-301.
4.
Anseth, K.S. , Goodner, M.D., Reill, M.A., Kannurpatti, A.R., Newman, S.M. and Bowman, C.N. (1996). The Influence of Comonomer Composition on Dimethacrylate Resin Properties for Dental Composites, J. Dent. Res., 75(8): 1607-1612.
5.
Dulik, D., Bernier, R. and Brauer, G.M. ( 1981). Effect of Diluent Monomer on the Physical-Properties of Bis-GMA-Based Composites, J. Dent. Res., 60(6): 983-989.
6.
Goncalves, F. , Pfeifer, C.S., Ferracane, J.L. and Braga, R.R. ( 2008). Contraction Stress Determinants in Dimethacrylate Composites , J. Dent. Res., 87(4): 367-371.
7.
Ogliari, F.A. , Ely, C., Zanchi , C.H., Fortes, C.B., Samuel, S.M., Demarco, F.F., Petzhold, C.L. and Piva, E. (2008). Influence of Chain Extender Length of Aromatic Dimethacrylates on Polymer Network Development, Dent. Mater., 24(2): 165-171.
8.
Moraes, R.R. , Gonçalves , L.S., Ogliari, F.A., Piva, E., Sinhoreti, M.A. and Correr-Sobrinho, L. ( 2008 ). Development of Dental Resin Luting Agents Based on Bis-EMA4: Bond Strength Evaluation, Express Polym. Lett., 2(2): 88-92.
9.
Sideridou, I. , Tserki, V. and Papanastasiou , G. (2002 ). Effect of Chemical Structure on Degree of Conversion in Light-Cured Dimethacrylate-Based Dental Resins, Biomaterials , 23(8): 1819-1829.
10.
Sideridou, I.D. and Achilias, D.S. (2005). Elution Study of Unreacted Bis-GMA, TEGDMA, UDMA, and Bis-EMA from Light-Cured Dental Resins and Resin Composites Using HPLC, J. Biomed. Mater. Res. B Appl. Biomater. , 74(1): 617-626.
11.
Sideridou, I.D., Achilias, D.S. and Karabela, M.M. (2006). Sorption Kinetics of Ethanol/Water Solution by Dimethacrylate-Based Dental Resins and Resin Composites , J. Biomed. Mater. Res. B Appl. Biomater., 81(1): 207-218.
12.
Kalachandra, S., Sankarapandian , M., Shobha, H.K., Taylor, D.F. and McGrath, J.E. (1997). Influence of Hydrogen Bonding on Properties of Bis-GMA Analogues , J. Mater. Sci. Mater. Med., 8(5): 283-286.
13.
Lemon, M.T. , Jones, M.S. and Stansbury , J.W. (2007). Hydrogen Bonding Interactions in Methacrylate Monomers and Polymers , J. Biomed. Mater. Res. A, 83(3): 734-746.
14.
Asmussen, E. and Peutzfeldt, A. (1998). Influence of UEDMA, BisGMA and TEGDMA on Selected Mechanical Properties of Experimental Resin Composites, Dent. Mater., 14(1): 51-56.
15.
Deepa, C.S. and Krishnan, V.K. (2000). Effect of Resin Matrix Ratio, Storage Medium, and Time upon the Physical Properties of a Radiopaque Dental Composite, J. Biomater. Appl., 14(3): 296-315.
16.
Sideridou, I., Achilias, D.S. and Kyrikou, E. (2004). Thermal Expansion Characteristics of Light-Cured Dental Resins and Resin Composites , Biomaterials , 25(15): 3087-3097.
17.
Sideridou, I., Achilias, D.S., Spyroudi, C. and Karabela, M. (2004). Water Sorption Characteristics of Light-Cured Dental Resins and Composites Based on Bis-EMA/PCDMA, Biomaterials, 25(2): 367-376.
18.
Moraes, R.R. , Brandt, W.C., Naves, L.Z., Correr-Sobrinho , L. and Piva, E. ( 2008). Light- and Time-Dependent Polymerization of Dual-Cured Resin Luting Agent beneath Ceramic, Acta Odontol. Scand., 66(5): 257-261.
19.
Ferracane, J.L. and Greener , E.H. (1986). The Effect of Resin Formulation on the Degree of Conversion and Mechanical Properties of Dental Restorative Resins, J. Biomed. Mater. Res., 20(1): 121-131.
20.
Lovell, L.G. , Newman, S.M. and Bowman, C.N. ( 1999). The Effects of Light Intensity, Temperature, and Comonomer Composition on the Polymerization Behavior of Dimethacrylate Dental Resins , J. Dent. Res., 78(8): 1469-1476.
21.
Halvorson, R.H. , Erickson, R.L. and Davidson, C.L. (2002). Energy Dependent Polymerization of Resin-Based Composite, Dent. Mater., 18(6): 463-469.
22.
Moraes, R.R. , Correr-Sobrinho, L., Sinhoreti, M.A., Puppin-Rontani , R.M., Ogliari, F.A. and Piva, E. ( 2008). Light-Activation of Resin Cement through Ceramic: Relationship between Irradiance Intensity and Bond Strength to Dentin, J. Biomed. Mater. Res. B Appl. Biomater., 85(1): 160-165.
23.
Ferracane, J.L. , Berge, H.X. and Condon, J.R. (1998). In Vitro Aging of Dental Composites in Water - Effect of Degree of Conversion, Filler Volume, and Filler/Matrix Coupling, J. Biomed. Mater. Res., 42(3): 465-472.
24.
Karmaker, A.C. , Dibenedetto, A.T. and Goldberg, A.J. (1997). Extent of Conversion and its Effect on the Mechanical Performance of Bis-GMA/ PEGDMA-Based Resins and their Composites with Continuous Glass Fibres, J. Mater. Sci. Mater. Med., 8(6): 369-374.
25.
Schneider, L.F., Moraes, R.R., Cavalcante, L.M., Sinhoreti, M.A., Correr-Sobrinho , L. and Consani, S. ( 2008). Cross-Link Density Evaluation through Softening Tests: Effect of Ethanol Concentration, Dent. Mater., 24(2): 199-203.
26.
Jones, D.W. and Rizkalla, A.S. (1996). Characterization of Experimental Composite Biomaterials, J. Biomed. Mater. Res. , 33(2): 89-100.
27.
Orefice, R.L. , Discacciati, J.A.C., Neves, A.D., Mansur, H.S. and Jansen, W.C. (2003). In Situ Evaluation of the Polymerization Kinetics and Corresponding Evolution of the Mechanical Properties of Dental Composites, Polym. Test., 22(1): 77-81.
28.
Kawai, K., Iwami, Y. and Ebisu, S. ( 1998). Effect of Resin Monomer Composition on Toothbrush Wear Resistance, J. Oral Rehab., 25(4): 264-268.
29.
Sankarapandian, M., Shobha, H.K., Kalachandra, S., McGrath, J.E. and Taylor, D.F. (1997). Characterization of Some Aromatic Dimethacrylates for Dental Composite Applications , J. Mater. Sci. Mater. Med., 8(8): 465-468.
30.
Lee, J.H. , Um, C.M. and Lee , I.B. (2006). Rheological Properties of Resin Composites According to Variations in Monomer and Filler Composition, Dent. Mater., 22(6): 515-526.
31.
Ferracane, J.L. (2006). Hygroscopic and Hydrolytic Effects in Dental Polymer Networks, Dent. Mater., 22(3): 211-222.
32.
Sideridou, I., Tserki, V. and Papanastasiou , G. (2003 ). Study of Water Sorption, Solubility and Modulus of Elasticity of Light-Cured Dimethacrylate-Based Dental Resins, Biomaterials , 24(4): 655-665.
33.
Elliott, J.E. , Lovell, L.G. and Bowman, C.N. (2001). Primary Cyclization in the Polymerization of Bis-GMA and TEGDMA: A Modeling Approach to Understanding the Cure of Dental Resins, Dent. Mater., 17(3): 221-229.
34.
Rey, L. , Duchet, J., Galy, J., Sautereau, H., Vouagner, D. and Carrion, L. ( 2002). Structural Heterogeneities and Mechanical Properties of Vinyl/ Dimethacrylate Networks Synthesized by Thermal Free Radical Polymerisation , Polym., 43(16): 4375-4384.
35.
International Standard Organization Specification 4049. ( 2000). Dentistry - Polymer-Based Filling, Restorative and Luting Materials, Geneva, Switzerland.
36.
Asaoka, K. and Hirano, S. ( 2003). Diffusion Coefficient of Water through Dental Composite Resin, Biomaterials, 24(6): 975-979.
