Laser Surface Modification of Ti—6Al—4V: Wear and Corrosion Characterization in Simulated Biofluid

Abstract

Laser surface melting (LSM) of Ti—6Al—4V is performed in argon to improve its properties, such as microstructure, corrosion, and wear for biomedical applications. Corrosion behavior is investigated by conducting electrochemical polarization experiments in simulated body fluid (Ringer's solution) at 37 C. Wear properties are evaluated in Ringer's solution using pin-on-disc apparatus at a slow speed.

Untreated Ti—6Al—4V contains α+β phase. After laser surface melting, it transforms to acicular α embedded in the prior β matrix. Grain growth in the range of 65—89 µm with increase in laser power from 800 to 1500 W due to increase in associated temperature is observed. The hardness of as-laserprocessed Ti—6Al—4V alloy is more (275—297 HV) than that of the untreated alloy (254 HV). Passivation currents are significantly reduced to <4.3 µA/cm² after laser treatment compared to untreated Ti—6Al—4V (≈12 µA/cm²). The wear resistance of laser-treated Ti—6Al—4V in simulated body fluid is enhanced compared to that of the untreated one. It is the highest for the one that is processed at a laser power of 800 W. Typical micro-cutting features of abrasive wear is the prominent mechanism of wear in both untreated and as-laser-treated Ti—6Al—4V. Fragmentation of wear debris assisted by microcracking was responsible for mass loss during the wear of untreated Ti—6Al—4V in Ringer's solution.

Keywords

laser surface treatment Ti—6Al—4V microstructure anodic polarization corrosion wear corrosion Ringer's solution

Get full access to this article

View all access options for this article.

References

Dong, H. and Bell, T. (1999). Tribological Behavior of Alumina Sliding against Ti-6Al-4V in Unlubricated Contact, Wear, 225—229(2): 874—884 .

Guleryuz, H. and Cimenoglu, H. (2004). Effect of Thermal Oxidation on Corrosion and Corrosion Wear Behavior of a Ti-6Al-4V Alloy, Biomaterials, 25(16): 3325—3333 .

Met, C. , Vandenbulcke, L. and Catherrine, M.C.S. (2003). Friction and Wear Characteristics of Various Prosthetic Materials Sliding against Smooth Diamond-coated Titanium Alloy, Wear, 255(7—12): 1022—1029 .

Hanawa, T. (1999). In vivo Metallic Biomaterials and Surface Modification, Mater. Sci. & Eng., A267(2): A260—A266 .

Silva, R.A. , Barbosa, M.A. , Vilar, R. , Conde, O. , Cunha, M. and Sutherland, I. (1994). Electrochemical Studies of Laser-treated Co-Cr-Mo Alloy in a Simulated Physiological Solution, J. Mater. Sci. Mater. Med., 5(4): 353—356 .

Badekas, H. , Panagopoulos, C. and Ecomnomou, S. (1994). Laser Surface-treatment of Titanium, J. Mater. Process. Technol., 44(1—2): 54—60 .

Weerasinghe, V.M. , West, D.R.F. and Damborenea, J.D. (1996). Laser Surface Nitriding of Titanium and a Titanium Alloy, J. Mater. Process. Technol., 58(1): 79—86 .

Gracia, I. and Damborenea, J.D. (1998). Corrosion Properties of TiN Prepared by Laser Gas Alloying of Ti and Ti6Al4V, Corros. Sci., 40(8): 1411—1419 .

Yue, T.M. , Cheung, T.M. and Man, H.C. (2000). The Effects of Laser Surface Treatment on the Corrosion Properties of Ti-6Al-4V Alloy in Hank's Solution, J. Mater. Sci. Lett., 19(3): 205—208 .

10.

Yue, T.M. , Yu, J.K. , Mei, Z. and Man, H.C. (2002). Excimer Laser Surface Treatment of Ti-6Al-4V Alloy for Corrosion Resistance Enhancement, Mater. Lett., 52(3): 206—212 .

11.

Sun, Z. , Annergren, I. , Pan, D. and Mai, T.A. (2003). Effects of Laser Surface Remelting on the Corrosion Behavior of Commercially Pure Titanium Sheet, Mater. Sci. Eng., A345(1—2): 293—300 .

12.

Jiang, P. , He, X.L. , Li, X.X. , Yu, L.G. and Wang, H.M. (2000). Wear Resistance of a Laser Surface Alloyed Ti6Al4V Alloy, Surf. Coat. Technol., 130(1): 24—28 .

13.

Ruff, A.W. (1998). Wear Measurements, In: Henry, S.D. (ed.), ASM Handbook on Friction, Vol. 18, pp. 362—369, Lubrication and Wear Technology, Materials Park, Ohio, USA.

14.

Boyer, R.R. (1995). Titanium and Titanium Alloys, In: Davis, J.R. (ed.), ASM Handbook on Metallography and Microstructure, Vol. 9, pp. 458—475.

15.

Dahotre, N.B. (1987). PhD Dissertation on Laser (2KW Continuous Wave CO₂ Laser) Melting and Alloying of Steel with Chromium, Michigan State University, East Lansing, Michigan, USA, pp. 83—86.

16.

Xie, J. and Kar, A. (1999). Laser Welding of Thin Sheet Steel with Surface Oxidation, Welding Research Supplement, 343S—348S.

17.

Wakade, C.G. , Dahotre, N.B. and Mukherjee, K. (1984). Damage in Aluminum, Zinc and Tin from a Nanosecond Electric Pulse Discharge, Mater. Sci. & Eng., 64: 247—254 .

18.

Hirth, J.P. (1972). The Influence of Grain Boundaries on Mechanical Properties, Metall. Trans., 3(10): 3047—3067 .

19.

Gray, G.T. , Rong, Shuh C. and Vecchio, S.K. (1972). Influence of Grain Size on the Constitutive Response and Substructure Evolution of MONEL 400, Metall. Trans., 3A(4): 1235—1247 .

20.

Singh, R. , Martin, M. and Dahotre, N.B. (2005). Influence of Laser Surface Modification on Corrosion Behavior of Stainless Steel 316L and Ti6Al4V Alloy in Simulated Body Fluid, Surf. Eng., 21: 297—306 .

21.

Schmidt, H. , Stechemesser, G. , Witte, J. and Soltani-Farshi, M. (1998). Depth Distributions and Anodic Polarization Behavior of Ion Implanted Ti-6Al-4V, Corros. Sci., 40(9): 1533—1545 .

22.

Metiko, M. , Hukovic, S. , Kwokal, A. and Piljac, J. (2003). The Influence of Niobium and Vanadium on Passivity of Titanium-based Implants in Physiological Solution, Biomaterials, 24(21): 3765—3775 .

23.

Kolman, D.G. and Scully, J.R. (1994). The Passivity and Electrochemistry of a Ti-15V-3Cr-3Al Titanium Alloy in Ambient Temperature Aqueous Sodium Chloride Solutions, J. Electrochem. Soc., 141(10): 2633—2641 .

24.

John, H.A. , Hofmann, S. and Muknz, W.-D. (1987). Surface and Interface Characterization of Heat-Treated (Ti, Al)N Coatings on High Speed Steel Substrates, Thin Solid Films, 153(1—3): 45—53 .

25.

Goldberg, J.R. and Gilbert, J.L. (2004). The Electrochemical and Mechanical Behavior of Passivated and TiN/AlN-coated Co-Cr-Mo and Ti-6Al-4V Alloys, Biomaterials, 25(5): 851—864 .

26.

Fontana, M.G. (1987). Corrosion Engineering, pp. 505—519, McGraw-Hill Co., Singapore .

27.

Parvathavarthini, N. , Dayal, R.K. , Sivakumar, R. , Mudali, Kamachi U. and Bharati, A. (1992). Pitting Corrosion Resistance of Laser Surface Alloyed 304 Stainless Steel, Mater. Sci. Tech., 8(7): 1070—1074 .

28.

Abkowitz, S. , Burke, J.J. and Hiltz, Jr., R.H. (1955). Titanium in Industry, p. 56, D. Van Nostrand Co., New York .

29.

Cooper, K.P. (1998). Laser Surface Processing, In: Henry, S.D. (ed.), Friction, Lubrication and Wear Technology, ASM Handbook, Vol. 18, p. 862, Materials Park, Ohio, USA .

30.

Elder, J.E. , Thamburaj, R. and Patnaik, P.C. (1989). Optimizing Ion Implantation Conditions for Improving Wear, Fatigue, and Fretting Fatigue of Ti6Al4V, Surface Eng., 5(1): 55—78 .

31.

Bloyce, A. , Morton, P.H. and Bell, T. (1994). Surface Engineering of Titanium and Titanium Alloys, In: ASM Handbook on Surface Engineering, Vol. 5, pp. 835—851, Materials Park, Ohio, USA .

32.

Kim, K.Y. , Bhattacharyya, S. and Agarwal, V. (1981). An Electrochemical Polarization Technique for Evaluation of Wear-corrosion in Moving Components under Stress, In: Ludema, I.C.C. (ed.), Wear of Materials, pp. 772—778, San Francisco, CA, ASME, New York .

33.

Landolt, D. , Mischler, S. , Stemp, M. and Barril, S. (2004). Third Body Effects and Material Fluxes in Tribocorrosion Systems Involving a Sliding Contact, Wear, 256(5): 517—524 .

34.

Tritschler, B. , Forest, B. and Rieu, J. (1999). Fretting Corrosion of Materials for Orthopaedic Implants: A Study of a Metal/Polymer Contact in an Artificial Physiological Medium, Tribol. Int., 32(10): 587—596 .

35.

Stack, M.M. and Chi, K. (2003). Mapping Sliding Wear of Steels in Aqueous Conditions, Wear, 255(1—6): 456—465 .

36.

Kustas, F.M. and Mishra, M.S. (1998). Friction and Wear of Titanium Alloys, In: Henry, S.D. (ed.), Friction, Lubrication and Wear Technology, ASM Handbook, Vol. 18, p. 778, Materials Park, Ohio, USA .

37.

Fedrizzi, L. , Rossi, S. , Bellei, F. and Deflorian, F. (2002). Wear-corrosion Mechanism of Hard Chromium Coatings, Wear, 253(11—12): 1173—1181 .

38.

Konca, E. , Cheng, Y.-T. , Weiner, A.M. , Dasch, J.M. , Erdemir, A. and Alpas, A.T. (2005). Transfer of 319 Al Alloy to Titanium Diboride and Titanium Nitride based (TiAlN, TiCN, TiN) Coatings: Effects of Sliding Speed, Temperature and Environment, Surf. & Coat. Tech., 200: 2260—2270 .