Abstract
Three-dimensional scaffolds produced by electrospinning from blends of Tecothane™ TT-1074A (Tect) with varying concentrations of gelatin (Gl) in hexafluoroisopropanol were investigated for their physicochemical properties, stability at different pH levels, and bio- and hemocompatibility. To enhance hemocompatibility, bivalirudin (Bv) was incorporated into the surface layer of the scaffold fibers. All scaffolds exhibited good strength (up to 22 MPa) with a high yield point (about 400%). Storage for 1 month at different pH levels leads to moderate decrease of stiffness with bell-shape variation of the elongation at break. IR spectra did not reveal discernible hydrolysis of pH-sensitive bonds. These changes also did not correlate with fiber diameters and may be attributed to inter-fiber contacts and rearrangements in the fiber inner structure. Scaffolds containing 10% Gl and 1.5% Bv demonstrated good biocompatibility in terms of human umbilical vein endothelial cell (HUVEC) adhesion and proliferation, as well as minimal platelet adhesion, aggregation induction, and hemolysis. In conclusion, these findings indicate the suitability of Tect-based scaffolds for vascular graft production.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
