Abstract
The main aim of this study is to fabricate an electrospun citric acid modified polyvinyl alcohol polyester that is biodegradable with non-toxic by-products and can be used for the culture of vascular smooth muscle cells. In this study, we have optimized the conditions for the electrospinning process of this polyester. The fibre morphology was studied by scanning electron microscopy which indicated that the fibre diameter was optimum at a range of 200 to 700 µm at 5% concentration and flow rate of 0.3 mL/h. The membranes were characterized for the change in structural aspects at the molecular level. The results showed development of more crystalline domains on electrospinning. The surface characteristics were also explored. Cell culture studies confirmed that the electrospun scaffold supported the attachment and proliferation of smooth muscle cells, which was evident from the cell proliferation assay. Hence, the electrospun polyester scaffolds are non-toxic and biocompatible with vascular smooth muscle cells, and find promising potential as scaffolds for vascular tissue engineering.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
