A combined rotational mold system for liver manufacturing was prepared. The combined rotational mold system was composed of a branched internal mold, a basement mold, and a series of external molds with increasing diameters. Semi-spindle constructs, consisting of multiple cell types, such as adipose-derived stem cells and hepatocytes encapsulated in a fibrin hydrogel, were created by sequentially sandwiching cell-laden fibrin hydrogels between the combined rotational mold system based on the Weissenberg effect of non-Newtonian fluid. A spindle liver lobe precursor was constructed, with a multi-scale vascular network including arteries, veins, and capillaries, by integrating the two semi-spindle constructs together and coating the spindle construct with a layer of poly(DL-lactide-co-glycolide acid) solution. The spindle liver lobe precursor was characterized by a series of in vivo experiments. This first report is the preparation of a functioning complex organ, such as the liver, that was produced using an inexpensive, simple, and effective method.
WangXTuomiJMäkitieAA. The integrations of biomaterials and rapid prototyping techniques for intelligent manufacturing of complex organs. In: LazinicaR (ed.) Advances in biomaterials science and applications in biomedicine. Rijeka: InTech, 2013, pp. 437–463.
2.
WangX. Overview on biocompatibilities of implantable biomaterials. In: LazinicaR (ed.) Advances in biomaterials science and biomedical applications in biomedicine. Rijeka: InTech, 2013, pp. 111–155.
3.
WangXYanYZhangR. Gelatin-based hydrogels for controlled cell assembly. In: OttenbriteRM (ed.) Biomedical applications of hydrogels handbook. New York: Springer, 2010, pp. 269–284.
4.
WangX. 3D printing of tissue/organ scaffolds for regenerative medicine. In: KhangG (ed.) Handbook of intelligent scaffolds for regenerative medicine. 2nd ed.Pan Stanford Publishing, in press.
5.
WaltherGGekasJBertrandDF. Amniotic stem cells for cellular cardiomyoplasty: promises and premises. Catheter Cardiovasc Inter2009; 73: 917–924.
6.
WangXYanYZhangR. Rapid prototyping as a tool for manufacturing bioartificial livers. Trends Biotechnol2007; 25: 505–513.
7.
WangXYanYZhangR. Recent trends and challenges in complex organ manufacturing. Tissue Eng Part B Rev2010; 16: 189–197.
WangX. Spatial effects of stem cell engagement in 3D printing constructs. J Stem Cells Res Rev Rep2014; 1: 5–9.
10.
XuYWangX. 3D biomimetic models for drug delivery and regenerative medicine. Curr Pharm Des2015; 21: 1618–1626.
11.
LiuLZhouXXuY. Controlled release of growth factors for regenerative medicine. Curr Pharm Des2015; 21: 1627–1632.
12.
ZhaoXLiuLWangJ. In vitro vascularization of a combined system based on a 3D printing technique. J Tissue Eng Regen M. Epub ahead of print 8January2014. DOI:10.1002/term.1863.
13.
ZhaoXWangX. Preparation of an adipose-derived stem cell/fibrin—poly(dl-lactic-co-glycolic acid) construct based on a rapid prototyping technique. J Bioact Compat Pol2013; 28: 191–203.
14.
WangXHeKZhangW. Optimizing the fabrication processes for manufacturing a hybrid hierarchical polyurethane-cell/hydrogel construct. J Bioact Compat Pol2013; 28: 303–319.
15.
WangXZhangQ. Overview on “Chinese–Finnish workshop on biomanufacturing and evaluation techniques.”Artif Organs2011; 35: E191–E193.
16.
WangXSuiSYanY. Design and fabrication of PLGA sandwiched cell/fibrin constructs for complex organ regeneration. J Bioact Compat Pol2010; 25: 229–240.
17.
WangXMäkitieAAPaloheimoK-S. Characterization of a PLGA sandwiched cell/fibrin tubular construct and induction of the adipose derived stem cells into smooth muscle cells. Mater Sci Eng C2011; 31: 801–808.
18.
WangXMäkitieAAPaloheimoK-S. A tubular PLGA sandwiched cell/hydrogel fabrication technique based on a step-by-step mold/extraction process. Adv Polym Tech2011; 30: 163–173.
19.
WangXSuiSLiuC. Optimizing the step by step forming processes for fabricating a PLGA sandwiched cell/hydrogel construct. J Appl Polym Sci2011; 120: 1199–1207.
20.
WangXSuiS. Pulsatile culture of a PLGA sandwiched cell/hydrogel construct fabricated using a step by step mold/extraction method. Artif Organs2011; 35: 645–655.
21.
WangXWangJ. Vascularization and adipogenesis of a spindle hierarchical adipose-derived stem cell/collagen/alginate-PLGA construct for breast manufacturing. IJITEE2015; 4: 1–8.
22.
KaiharaSBorensteinJKokaR. Silicon micromachining to tissue engineer branched vascular channels for liver fabrication. Tissue Eng2000; 6: 105–517.
23.
LiSXiongZWangX. Direct fabrication of a hybrid cell/hydrogel construct by a double-nozzle assembling technology. J Bioact Compat Pol2009; 24: 249–265.
24.
LiSYanYXiongZ. Gradient hydrogel construct based on an improved cell assembling system. J Bioact Compat Pol2009; 24: 84–99.
25.
YaoRZhangRYanY. In vitro angiogenesis of 3D tissue engineered adipose tissue. J Bioact Compat Pol2009; 24: 5–24.
26.
YaoRZhangRWangX. Design and evaluation of a cell microencapsulating device for cell assembly technology. J Bioact Compat Pol2009; 24: 48–62.
27.
WangXXuH. Incorporation of DMSO and dextran-40 into a gelatin/alginate hydrogel for controlled assembled cell cryopreservation. Cryobiology2010; 61: 345–351.
28.
WangXPaloheimoK-SXuH. Cryopreservation of cell/hydrogel constructs based on a new cell-assembling technique. J Bioact Compat Pol2010; 25: 634–653.
29.
SuiSWangXLiuP. Cryopreservation of 3D constructs based on a controlled cell assembling technology. J Bioact Compat Pol2009; 24: 473–487.
30.
XuWWangXYanY. Rapid prototyping of three-dimensional cell/gelatin/fibrinogen constructs for medical regeneration. J Bioact Compat Pol2007; 22: 363–377.
31.
WangXYanYPanY. Generation of three-dimensional hepatocyte/gelatin structures with rapid prototyping system. Tissue Eng2006; 12: 83–90.
32.
YanYWangXPanY. Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique. Biomaterials2005; 26: 5864–5871.
33.
YanYWangXXiongZ. Direct construction of a three-dimensional structure with cells and hydrogel. J Bioact Compat Pol2005; 20: 259–269.
34.
XuMWangXYanY. A cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix. Biomaterials2010; 31: 3868–3877.
35.
ZhangTYanYWangX. Three-dimensional gelatin and gelatin/hyaluronan hydrogel structures for traumatic brain injury. J Bioact Compat Pol2007; 22: 19–29.
36.
MacoskoCW. Rheology: principles, measurements, and applications. New York: Wiley, 1994.
37.
XuWWangXYanY. Rapid prototyping of polyurethane for the creation of branched vascular systems. J Bioact Compat Pol2008; 23: 103–114.
38.
XuWWangXYanY. A polyurethane-gelatin hybrid construct for the manufacturing of implantable bioartificial livers. J Bioact Compat Pol2008; 23: 409–422.
39.
CuiTYanYZhangR. Rapid prototyping of a double layer polyurethane-collagen conduit for peripheral nerve regeneration. Tissue Eng Part C Methods2009; 15: 1–9.
40.
CuiTWangXYanY. Rapid prototyping a new polyurethane-collagen conduit and its Schwann cell compatibility. J Bioact Compat Pol2009; 24: 5–17.
41.
WangXCuiTYanY. Peroneal nerve regeneration along a new polyurethane-collagen guide conduit. J Bioact Compat Pol2009; 24: 109–127.
42.
HuangYHeKWangX. Rapid Prototyping of a hybrid hierarchical polyurethane-cell/hydrogel construct for regenerative medicine. Mater Sci Eng C2013; 33: 3220–3229.
43.
HeKWangX. Rapid prototyping of tubular polyurethane and cell/hydrogel constructs. J Bioact Compat Pol2011; 26: 363–374.
44.
YanYWangXYinD. A new polyurethane/heparin vascular graft for small-caliber vein repair. J Bioact Compat Pol2007; 22: 323–341.
45.
YinDWangXYanY. Preliminary studies on peripheral nerve regeneration along a new polyurethane conduit. J Bioact Compat Pol2007; 22: 143–159.
