Scaffolds made from poly(3-hydroxybutyrate) were prepared by thermally induced phase separation from solutions in dioxane at temperatures above (23°C) or below the freezing point of the solvent. At 23°C, gelation occured with nano-fibrous network formation. The scaffolds prepared at —12°C and —25°C exhibited a highly porous morphology, with pores in the range of 3—25 μm, caused by freezing of dioxane. The macroporous scaffolds, prepared at —12°C, were treated with lipase to generate functional groups to which gelatin and glucosamine, respectively, were chemically coupled. The modified scaffolds had lower molecular weight, higher water content, lower melting temperature, and enthalpy. Cultivation of human embryonic fibroblasts on the macroporous scaffolds confirmed that the cells proliferated and adhered to the materials.
Hazer B. and Steinbüchel A.Increased diversification of polyhydroxyalkanoates by modification reactions for industrial and medical applications. Appl Microbiol Biotechnol2007; 74: 1-12.
2.
Zhao K., Yang X., Chen GQ and Chen JCEffect of lipase treatment on the biocompatibility of microbial polyhydroxyalkanoates . J Mater Sci Mater Med2002; 13: 849-854.
3.
Zhao K., Deng Y., Chen JC and Chen GQPolyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility . Biomaterials2003; 24: 1041-1045.
4.
Wang YW, Wu Q. and Chen GQReduced mouse fibroblast cell growth by increased hydrophilicity of microbial polyhydroxyalkanoates via hyaluronan coating. Biomaterials2003; 24: 4621-4629.
5.
Rao U., Kumar R., Balaji S. and Sehgal PKA novel biocompatible poly(3-hydroxy-co-4-hydroxybutyrate) blend as a potential biomaterial for tissue engineering. J Bioact Compat Polym2010; 25: 419-436.
6.
Bayram C., Denkbaş EB, Kiliçay E., Hazer B., Çakmak HB and Noda I.Preparation and characterization of triamcinolone acetonideloaded poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHx) microspheres. J Bioact Compat Polym2008; 23: 334-347.
7.
Wu Q., Wang Y. and Chen GQMedical application of microbial biopolyesters polyhydroxyalkanoates. Artif Cells Blood Substit Immobil Biotechnol2009; 37: 1-12.
8.
Chen GQ and Wu Q.The application of polyhydroxyalkanoates as tissue engineering materials. Biomaterials2005; 26: 6565-6578.
9.
Rao U., Kumar R., Balaji S. and Sehgal PKA novel biocompatible poly(3-hydroxy-co-4-hydroxybutyrate) blend as a potential biomaterial for tissue engineering. J Bioact Compat Polym2010; 25: 419-436.
10.
Zhang DM, Cui FZ, Luo ZS, Lin YB, Zhao K. and Chen GQWettability improvement of bacterial polyhydroxyalkanoates via ion implantation . Surf Coat Technol2000; 131: 350-354.
11.
Pompe T., Keller K., Mothes G., Nitschke M., Teese M., Zimmermann R., et al. Surface modification of poly(hydroxybutyrate) films to control cell-matrix adhesion. Biomaterials2007; 28: 28-37.
12.
Kim HW, Chung CW, Kim SS, Kim YB and Rhee YHPreparation and cell compatibility of acrylamide-grafted poly(3-hydroxyoctanoate) . Int J Biol Macromol2002; 30: 129-135.
13.
Kim HW, Chung CW and Rhee YHUV-induced graft copolymerization of monoacrylate-poly(ethyleneglycol) onto poly(3-hydroxyoctanoate) to reduce protein adsorption and platelet adhesion . Int J Biol Macromol2005; 35: 47-53.
14.
Constantin M., Simionescu CI, Carpov A., Samain E. and Driguez H.Chemical modification of poly(hydroxyalkanoates). Copolymers bearing pendant sugars. Macromol Rapid Commun1999; 20: 91-94.
15.
Yang X., Zhao K. and Chen GQEffect of surface treatment on the biocompatibility of microbial polyhydroxyalkanoates . Biomaterials2002; 23: 1391-1397.
16.
Quillaguaman J., Doan-Van T., Guzmán H., Guzmán D., Martín J., Everest A., et al. Poly(3-hydroxybutyrate) production by Halomonas boliviensis in fed-batch culture. Appl Microbiol Biotechnol2008; 78: 227-232.
17.
Richert L., Boulmedais F., Lavalle P., Mutterer J., Ferreux E., Decher G., et al. Improvement of stability and cell adhesion properties of polyelectrolyte multilayer films by chemical crosslinking. Biomacromolecules2004; 5: 284-294.
18.
Peptu CA, Buhus G., Popa M., Perichaud A. and Costin D.Double crosslinked chitosan-gelatin particulate systems for ophthalmic applications . J Bioact Compat Polym2010; 25: 98-116.
19.
Yang SH, Lee YS, Lin FH, Yang JM and Chen KSChitosan/Poly(vinyl alcohol) blending hydrogel coating improves the surface characteristics of segmented polyurethane urethral catheters. J Biomed Mat Res B Appl Biomater2007; 83: 304-313.
20.
Jing X., Jing L., Lin Z., Yandao G., Nanming Z. and Xiufang Z.Effects of quenching temperature and time on pore diameter of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) porous scaffolds and MC3T3-E1 osteoblast response to the scaffolds. Tsinghua Sci Technol2007; 12: 366-371.
21.
Jing X., Zhang L., Zheng ZA, Chen G., Gong Y., Zhao N., et al. Preparation and evaluation of porous poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) - hydroxyapatite composite scaffolds. J Biomater Appl2008; 22: 293-307.
22.
Wang L., Wang ZH, Shen CY, You ML, Xiao JF and Chen GQDifferentiation of human bone marrow mesenchymal stem cells grown in terpolyesters of 3-hydroxyalkanoates scaffolds into nerve cells. Biomaterials2010; 31: 1691-1698.
23.
Van Vlierberghe S., Dubruel P. and Schacht E.Effect of cryogenic treatment on the rheological properties of gelatin hydrogels. J Bioact Compat Polym2010; 25: 498-512.
24.
Wang X., Paloheimo K-S., Xu H. and Liu C.Cryopreservation of cell/hydrogel constructs based on a new cell-assembling technique. J Bioact Compat Polym2010; 25: 634-653.
25.
Shen F., Zhang E. and Wei Z.Surface bio-modification of poly(hydroxybutyrate-co-hydroxyhexanoate) and its aging effect. Colloid Surface B2009; 73: 302-307.
26.
Van Wachem PB, Plantinga JA, Wissink MJ, Beernink R., Poot AA, Engbers GH, et al. In vivo biocompatibility of carbodiimide-linked collagen scaffolds: Effects of crosslink density, heparin immobilization, and bfgf loading. J Biomed Mater Res2001; 55: 368-378.
