To improve the hemocompatibility and elution of antimicrobial agents for medical devices, N,N′-dimethylacrylamide (DMAAm) and N-isopropylacrylamide (NIPAAm) were sequentially grafted onto polypropylene (PP) films. Various (PP-g-DMAAm)-g-NIPAAm grafts were prepared using different time periods of irradiation while keeping the radiation dose constant. The hydrogel layer that formed on the surface of the PP was temperature-responsive (shifted from 32°C for NIPAAm to 37°C for the copolymer). The (PP-g-DMAAm)-g-NIPAAm films adsorbed serum albumin but not fibrinogen and had significantly lower hemolytic and thrombogenic activity. The DMAAm promoted the loading of norfloxacin (13.3 μg cm—2) when the hydrogel layer was swollen; as the NIPAAm shrank, a sustained delivery (∼6 h) occurred at body temperature. These functionalized PP films have potential as hemo- and cyto-compatible materials for medical devices and drug delivery products.
Ikada Y.Surface modification of polymers for medical applications. Biomaterials1994; 15: 725-736.
2.
Mao C., Qiu Y., Sang H., et al. Various approaches to modify biomaterial surfaces for improving biocompatibility. Adv Colloid Interface Sci2004; 110: 5-17.
3.
Asadinezhad A., Novak I., Lehocky M., et al. A physicochemical approach to render antibacterial surfaces on plasma-treated medical-grade PVC: Irgasan coating. Plasma Process Polym2010; 7: 504-514.
4.
Maniglio D., Bonani W., Bortoluzzi G., Servoli E., Motta A. and Migliaresi C.Electrodeposition of silk fibroin on metal substrates. J Bioact Comp Polym2010; 25: 441-454.
5.
Li Q., Huang N., Chen J., Chen C., Chen J. and Chen H.Endothelial cell and platelet behavior on titanium modified with a mutilayer of polyelectrolytes. J Bioact Comp Polym2009 ; 24: 129-150.
6.
Castner DG and Ratner BDBiomedical surface science: Foundations to frontiers. Surf Sci2002; 500: 28-60.
7.
Pavithra D. and Doble M.Biofilm formation, bacterial adhesion and host response on polymeric implants-issues and prevention. Biomed Mater2008; 3: 034003.
8.
Wu P. and Grainger DWDrug/device combinations for local drug therapies and infection prophylaxis . Biomaterials2006; 27: 2450-2467.
9.
Cao Z., Sun X., Sun Y. and Fong H.Rechargeable antibacterial and antifungal polymeric silver sulfadiazines . J Bioact Comp Polym2009; 24: 350-367.
10.
Ruiz JC, Alvarez-Lorenzo C., Taboada P., et al. Polypropylene grafted with smart polymers (PNIPAAm/PAAc) for loading and controlled release of vancomycin. Eur J Pharm Biopharm2008; 70: 467-477.
11.
Titaux GA, Contreras-Garcia A. and Bucio E.Surface modification by gamma-ray-induced grafting of PDMAEMA/PEGMEMA onto PE films. Radiat Phys Chem2009; 78: 485-488.
12.
Rudenja S., Zhao N. and Liu S.Surface interpenetrating networks of polyacrylamide in poly(ethylene terephthalate) as a means of surface modification. Eur Polym J2010; 46: 2078-2084.
13.
Bucio E. and Burillo G.Radiation grafting of pH and thermosensitive N-isopropylacrylamide and acrylic acid onto PTFE films by a two-step process. Radiat Phys Chem2007; 76: 1724-1727.
14.
Geuskens G. , Etoc A. and Di Michele P.Surface modification of polymers VII: Photochemical grafting of acrylamide and N-isopropylacrylamide onto polyethylene initiated by anthraquinone-2-sulfonate adsorbed at the surface of the polymer. Eur Polym J2000; 36: 265-271.
15.
Bhattacharya A. and Misra BNGrafting: a versatile means to modify polymers: Techniques, factors and applications. Prog Polym Sci2004; 29: 767-814.
16.
Alvarez-Lorenzo C., Bucio E., Burillo G. and Concheiro A.Medical devices modified at the surface by gamma-ray grafting for drug loading and delivery . Expert Opin Drug Del2010; 7: 173-185.
17.
Francis S., Dhanawade BR, Mitra D., Varshney L. and Sabharwal S.Radiation-induced grafting of diallyldimethylammonium chloride onto acrylic acid grafted polyethylene. Radiat Phys Chem2009; 78: 42-47.
18.
Park KR, Kang PH and Nho YCPreparation of PFA-g-polystyrene sulfonic acid membranes by the γ-radiation grafting of styrene onto PFA films. React Funct Polym2005; 65: 47-56.
19.
Dargaville TR, George GA, Hilla DJT and Whittaker AKHigh energy radiation grafting of fluoropolymers . Prog Polym Sci2003; 28: 1355-1376.
20.
Lindberg T. , Wirsén A. and Albertsson ACGraft polymerisation of acrylamide onto PCL film by electron beam pre-irradiation in air or argon. Morphology in the final grafted state. Polymer2000; 41: 4099-4111.
21.
Contreras-García A., Bucio E., Concheiro A. and Alvarez-Lorenzo C.Polypropylene grafted with NIPAAm and APMA for creating hemocompatible surfaces that load/elute nalidixic acid. React Funct Polym2010; 70: 836-842.
22.
Geever LM, Nugent MJD and Higginbotham CLThe effect of salts and pH buffered solutions on the phase transition temperature and swelling of thermoresponsive pseudogels based on N-isopropylacrylamide . J Mater Sci2007; 42: 9845-9854.
23.
Santos JR, Alves NM and Mano JFNew thermoresponsive hydrogels based on poly (N-isopropylacrylamide)/hyaluronic acid semiinterpenetrated polymer networks: swelling properties and drug release studies. J Bioact Comp Polym2010; 25: 169-184.
24.
Carenza M., Lora S., Palma G., Pezzin G. and Caliceti P.Enhanced biocompatibility of polyphosphazenes achieved by radiation grafting . Radiat Phys Chem1996; 48: 231-236.
25.
Mullarney MP , Seery TAP and Weiss RADrug diffusion in hydrophobically modified N,N-dimethylacrylamide hydrogels . Polymer2006; 47: 3845-3855.
26.
Escobar JL, García D., Valerino A., Zaldívar D., Hernáez E. and Katime I.Cephazoline sodium release from poly(N-isopropyl acrylamide-coN,N-dimethylacrylamide) hydrogels. J Appl Polym Sci2004; 91: 3433-3437.
27.
Anderson EM , Noble ML, Garty S., et al. Sustained release of antibiotic from poly(2-hydroxyethyl methacrylate) to prevent blinding infections after cataract surgery. Biomaterials2009; 30: 5675-5681.
28.
Rahman N., Ahmad Y. and Azmi SNH.Kinetic spectrophotometric method for the determination of norfloxacin in pharmaceutical formulations. Eur J Pharm Biopharm2004; 57: 359-367.
29.
Evstigneev MP, Rybakova KA and Davies DBComplexation of norfloxacin with DNA in the presence of caffeine. Biophys Chem2006; 121: 84-95.
30.
Abuo-Rahma GEA , Sarhan HA and Gad GFM.Design, synthesis, antibacterial activity and physicochemical parameters of novel N-4-piperazinyl derivatives of norfloxacin . Bioorgan Med Chem2009; 17: 3879-3886.
31.
Hagmann WKThe many roles for fluorine in medicinal chemistry. J Med Chem2008; 51: 4359-4369.
32.
Imai Y. and Nose Y.A new method for evaluation of antithrombogencity of materials. J Biomed Mater Res1972; 6: 165-172.
33.
Yıldız B., Işık B. and Kış M.Synthesis and characterization of thermoresponsive isopropylacrylamide-acrylamide hydrogels . Eur Polym J2002; 38: 1343-1347.
34.
Ríhová B.Biocompatibility of biomaterials: hemocompatibility, immunocompatiblity and biocompatibility of solid polymeric materials and soluble targetable polymeric carriers. Adv Drug Deliv Rev1996; 21: 157-176.
35.
Anderson JM , Rodriguez A. and Chang DTForeign body reaction to biomaterials. Semin Immunol2008; 20: 86-100.
36.
Hu DSG and Tsai CECorrelation between interfacial free energy and albumin adsorption in poly(acrylonitrile-acrylamide-acrylic acid) hydrogels . J Appl Polym Sci1996; 59: 1809-1817.
37.
Akkaş P., Sari M., Şen M. and Güven O.The effect of external stimuli on the bovine serum albumin adsorption capacity of poly(acrylamide/maleic acid) hydrogels prepared by gamma rays. Radiat Phys Chem1999; 55: 717-721.
38.
Zhao L., Xu L., Mitomo H. and Yoshii F.Synthesis of pH-sensitive PVP/CM-chitosan hydrogels with improved surface property by irradiation. Carbohyd Polym2006 ; 64: 473-480.
