Rapid prototyping (RP)-based highly porous poly(DL-lactic-co-glycolic acid)/tricalcium phosphate (PLGA/TCP(RP)) scaffolds were fabricated. PLGA/TCP constructs (PLGA/TCP(TS)) were also made via thermally induced phase separation with solvent casting and by particulate leaching approach. Both scaffolds were loaded with bovine bone protein extract (BBPE). Sixty-four New Zealand white rabbits were randomized into four groups (groups of A, B, C, and D) and unilaterally underwent posterior lumbar interlaminar fusion at L2—L4 level. Spinal fusions were systematically evaluated. In groups of A (PLGA/TCP (RP)/BBPE constructs) and C (autogenous iliac bone grafts), good bone fusions occurred in vivo. Histological analyses indicated that endochondral ossification played an essential role in initiation of bone fusions in group A, whereas in group B (PLGA/TCP(TS)/BBPE constructs), few bone fusions were observed. In group D (PLGA/TCP(RP) scaffolds alone), the scaffolds were biocompatible and biodegradable; however, no newly formed bone mass or bone fusion was found. Twelve weeks after surgery, the fusion was significantly higher in groups of A and C compared with groups B and D (p<0.01). The PLGA/ TCP(RP)/BBPE biomaterials have potential as grafting substitutes for bone healing and spinal fusion.
Lopez-Heredia, M.A., Sohier, J., Gaillard, C., Quillard, S., Dorget, M. and Layrolle, P. (2008). Rapid Prototyped Porous Titanium Coated with Calcium Phosphate as a Scaffold for Bone Tissue Engineering , Biomaterials, 29(17): 2608-2615.
2.
Jose, M.V., Thomas, V., Johnson, K.T., Dean, D.R. and Nyairo, E. ( 2009). Aligned PLGA/HA Nanofibrous Nanocomposite Scaffolds for Bone Tissue Engineering, Acta Biomater., 5(1): 305-315.
3.
Xiong, Z., Yan, Y., Zhang, R. and Wang, X. ( 2005). Organism Manufacturing Engineering Based on Rapid Prototyping Principles, Rapid Prototyping J., 11(3): 160-166.
4.
Kyriakidou, K., Lucarini, G., Zizzi, A., Salvolini, E., Belmonte, M.M., Mollica, F. et al. (2008). Dynamic Co-Seeding of Osteoblast and Endothelial Cells on 3D Polycaprolactone Scaffolds for Enhanced Bone Tissue Engineering, J. Bioact. Compat. Polym., 23(3): 227-243.
5.
Ma, X., Wu, X., Wu, Y., Liu, J., Xiong, Z., Lv, R. et al. (2009). Posterolateral Spinal Fusion in Rabbits Using a RP-based PLGA/TCP/Col/BMSCs-OB Biomimetic Grafting Material, J. Bioact. Compat. Polym., 24(5): 457-472.
6.
White, A.P., Vaccaro, A.R., Hall, J.A., Whang, P.G., Friel, B.C. and McKee, M.D. ( 2007). Clinical Applications of BMP-7/OP-1 in Fractures, Nonunions and Spinal fusion, Int. Orthop., 31(6): 735-741.
7.
Bi, L., Hu, Y., Fan, H., Meng, G., Liu, J., Li, D. et al. (2007). Treatment of Contaminated Bone Defects with Clindamycin-Reconstituted Bone Xenograft-Composites, J. Biomed. Mater. Res. B Appl. Biomater., 82(2): 418-427.
8.
Zhu, H., Wu, Q., Shentu, J., Wang, H., Hu, Y., Zhu, K. et al. (2005). Release Behavior and Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 from Porous PLGA Scaffold, J. Bioact. Compat. Polym., 20(3): 271-278.
9.
Patel, Z.S., Yamamoto, M., Ueda, H., Tabata, Y. and Mikos, A.G. ( 2008). Biodegradable Gelatin Microparticles as Delivery Systems for the Controlled Release of Bone Morphogenetic Protein-2, Acta Biomater., 4(5): 1126-1138.
10.
Ma, X., Hu, Y., Yan, Y., Xiong, Z., Lü, R., Wang, J. et al. (2006). The Experimental Study of Biomimetic Artificial Cartilage Fabrication In Vitro and Ectopic Chondrogenesis In Vivo, Sheng. Wu. Yi. Xue. Gong. Cheng. Xue. Za. Zhi., 23(4): 795-799.
11.
Asti, A., Visai, L., Dorati, R., Conti, B., Saino, E., Sbarra, S. et al. (2008). Improved Cell Growth by Bio-Oss/PLA Scaffolds for Use as a Bone Substitute, Technol. Health Care, 16(6): 401-413.
12.
Ma, X., Hu, Y., Wu, X., Yan, Y., Xiong, Z., Lu, R. et al. (2008). Surface Modification of Biodegradable Polymer/TCP Scaffolds and Related Research, Sheng. Wu. Yi. Xue. Gong. Cheng. Xue. Za. Zhi., 25(3): 571-577.
13.
Sun, Q.M. , Hu, Y.Y., Ma, X. and Bai, J.P. (2004). Observation on In Vitro Degradation of Different Ratio of Polymer/Tricalcium Phosphate Compound Materials Prefabricated by Modified Thermally Induced Phase Separation, Zhong. Guo. Lin. Chuang. Kang. Fu., 8(8): 1436-1438.
14.
Hu, Y., Zhang, C., Zhang, S., Xiong, Z. and Xu, J. ( 2003). Development of a Porous Poly(L-Lactic Acid)/Hydroxyapatite/Collagen Scaffold as a BMP Delivery System and Its Use in Healing Canine Segmental Bone Defect, J. Biomed. Mater. Res. A, 67(2): 591-598.
15.
Guo, H. , Su, J., Wei, J., Kong, H. and Liu, C. (2009). Biocompatibility and Osteogenicity of Degradable Ca-Deficient Hydroxyapatite Scaffolds from Calcium Phosphate Cement for Bone Tissue Engineering, Acta Biomater. , 5(1): 268-278.
16.
Ma, X., Hu, Y.Y., Wu, X.M., Liu, J., Xiong, Z., Yan, Y.N. et al. (2009). Fabrication of a RP-based Biomimetic Grafting Material for Bone Tissue Engineering, Mater. Sci. Forum, 626-627: 553-558.
17.
Cui, T. , Wang, X., Yan, Y. and Zhang, R. (2009). Rapid Prototyping a Double-Layer Polyurethane - Collagen Conduit and Its Schwann Cell Compatibility, J. Bioact. Compat. Polym., 24(1 Suppl): 5-17.
18.
Moroni, L., de Wijn, J.R. and van Blitterswijk, C.A. ( 2008). Integrating Novel Technologies to Fabricate Smart Scaffolds , J. Biomater. Sci. Polym. Ed., 19(5): 543-572.
19.
Liu, L. , Xiong, Z., Zhang, R., Jin, L. and Yan, Y. (2009). A Novel Osteochondral Scaffold Fabricated via Multi-Nozzle Low-Temperature Deposition Manufacturing , J. Bioact. Compat. Polym., 24(1 Suppl): 18-30.
20.
Ma, X., Wu, X., Hu, Y., Xiong, Z., Lv, R., Wang, J. et al. (2009). Intervertebral Spinal Fusion Using a RP-based PLGA/TCP/bBMP Biomimetic Grafting Material, J. Bioact. Compat. Polym., 24(1 Suppl): 146-157.
21.
Karageorgiou, V. and Kaplan, D. (2005). Porosity of 3D Biomaterial Scaffolds and Osteogenesis, Biomaterials, 26(27): 5474-5491.
22.
Lian, Q., Li, D., Jin, Z., Wang, J., Li, A., Wang, Z. et al. (2009). Fabrication and In Vitro Evaluation of Calcium Phosphate Combined with Chitosan Fibers for Scaffold Structures, J. Bioact. Compat. Polym., 24(1 Suppl): 113-124.
23.
Gigante, A. , Manzotti, S., Bevilacqua, C., Orciani, M., Di Primio, R. and Mattioli-Belmonte , M. (2008). Adult Mesenchymal Stem Cells for Bone and Cartilage Engineering: Effect of Scaffold Materials, Eur. J. Histochem., 52(3): 169-174.
24.
Zhang, H. and Chen, Z. ( 2010). Fabrication and Characterization of Electrospun PLGA/MWNTs/Hydroxyapatite Biocomposite Scaffolds for Bone Tissue Engineering, J. Bioact. Compat. Polym., 25(3): 241-259.
25.
Sun, H., Ye, F., Wang, J., Shi, Y., Tu, Z., Bao, J. et al. (2008). The Upregulation of Osteoblast Marker Genes in Mesenchymal Stem Cells Prove the Osteoinductivity of Hydroxyapatite/Tricalcium Phosphate Biomaterial, Transplant. Proc., 40(8): 2645-2648.
26.
Matsuno, T., Hashimoto, Y., Adachi, S., Omata, K., Yoshitaka, Y., Ozeki, Y. et al. (2008). Preparation of Injectable 3D-Formed Beta-Tricalcium Phosphate Bead/Alginate Composite for Bone Tissue Engineering, Dent. Mater . J., 27(6): 827-834.
27.
Maire, M., Chaubet, F., Mary, P., Blanchat, C., Meunier, A. and Logeart-Avramoglou, D. ( 2005). Bovine BMP Osteoinductive Potential Enhanced by Functionalized Dextran-Derived Hydrogels, Biomaterials, 26(24): 5085-5092.
28.
Sun, X. , Zhao, L., Hu, Y., Yuan, Z., Ji, Q. and Li, M. (2006). Preparation of Massive Anti-Infective Reconstituted Bone Xenograft and Related Studies, J. Pediatr. Orthop. B, 15(2):113-119.
29.
Kujala, S., Vähäsarja, V., Serlo, W. and Jalovaara, P. ( 2008). Treatment of Congenital Pseudoarthrosis of the Tibia with Native Bovine BMP: A Case Report, Acta Orthop. Belg. , 74(1): 132-136.
30.
Bezer, M., Yildirim, Y., Erol, B. and Güven, O. ( 2005). Absorbable Self-Reinforced Polylactide (SR-PLLA) Rods vs Rigid Rods (K-Wire) in Spinal Fusion: An Experimental Study in Rabbits, Eur. Spine J., 14(3): 227-233.
