Biocomposite scaffolds of poly(lactic-co-glycolic acid) (PLGA), multiwalled carbon nanotubes (MWNTs), and hydroxyapatite (HA) nanoparticles were prepared ‘by electrospinning’ for bone tissue engineering. The structure, surface morphology, and some properties of these PLGA/MWNTs/ HA composites were evaluated. Cultured bone marrow-derived mesenchymal stem cells (BMSCs) were seeded on the PLGA/MWNTs/HA scaffolds, and their attachment and proliferation were determined by scanning electron microscopy (SEM) and MTT assay, respectively. The composite scaffolds, a 3D nonwoven fabric construct mimicked the structure of the natural extracellular matrix. The average diameter of the PLGA/MWNTs/HA fibers increased with increasing HA content from 0.5% to 1.5% in the composites. The SEM and MTT results indicated good biocompatibility by the scaffolds, and that the attachment and proliferation of BMSCs were significantly increased in the PLGA/MWNTs/ 1.0%HA and PLGA/MWNTs/1.5%HA scaffolds compared with the PLGA control. These scaffolds, fabricated by electrospinning, indicate good potential for bone tissue engineering applications.
Langer, R. and Vacanti, J.P. ( 1993). Tissue Engineering, Science, 260: 920-926.
2.
Brekke, J.H. and Toth, J.M. (1998). Principles of Tissue Engineering Applied to Programmable Osteogenesis, J. Biomed. Mater. Res., 43: 380-398.
3.
Gunatillake, P.A. and Adhikari, R. (2003). Biodegradable Synthetic Polymer for Tissue Engineering, Eur. Cell. Mater., 5: 1-16.
4.
Lin, A.S. , Barrows, T.H., Cartmell, S.H. and Guldberg, R.E. (2003). Microarchitectural and Mechanical Characterization of Oriented Porous Polymer Scaffolds, Biomaterials, 24: 481-489.
5.
Kokubo, T., Kim, H.M. and Kawashita, M. ( 2003). Novel Bioactive Materials with Different Mechanical Properties , Biomaterials, 24: 2161-2175.
6.
Li, S., de Wijn, J.R., Li, J.P., Layrolle, P. and de Groot, K. ( 2003). Macroporous Biphasic Calcium Phosphate Scaffold with High Permeability/ Porosity Ratio, Tissue Eng., 9: 535-548.
7.
Deschamps, A.A. , Claase, M.B., Sleijster, W.J., Bruijn, J.D., Grijpma, D.W. and Feijen, J. (2002). Design of Segmented Poly(Ether Ester) Materials and Structures for the Tissue Engineering of Bone, J. Control Release, 78: 175-186.
8.
Chen, Y., Mak, A.F.T., Wang, M., Li, J.S. and Wong, M.S. ( 2006). PLLA Scaffolds with Biomimetic Apatite Coating and Biomimetic Apatite/Collagen Composite Coating to Enhance Osteoblast-like Cells Attachment and Activity, Surf. Coating Tech., 201: 575-580.
9.
Goldstein, A.S. , Zhu, G., Morris, G.E., Meszlenyi, R.K. and Mikos, A.G. (1999). Effect of Osteoblastic Culture Conditions on the Structure of Poly(DL-Lactic-co-Glycolic Acid) Foam Scaffolds, Tissue Eng., 5: 421-433.
10.
Mikos, A.G. and Temenoff, J.S. (2000). Formation of Highly Porous Biodegradable Scaffolds for Tissue Engineering, Electron J. Biotechnol., 3: 114-119.
11.
Mooney, D.J. , Mazzoni, C.L., Breuer, C., McNamara, K., Hern, D. and Vacanti, J.P. (1996). Stabilized Polyglycolic Acid Fibre-based Tubes for Tissue Engineering, Biomaterials , 17: 115-124.
12.
Nam, Y.S. , Yoon, J.J. and Park, T.G. (2000). A Novel Fabrication Method of Macroporous Biodegradable Polymer Scaffolds Using Gas Foaming Salt as a Porogen Additive, J. Biomed. Mater. Res., 53: 1-7.
13.
Whang, K., Thomas, C.H., Healy, K.E. and Nuber, G. ( 1995). A Novel Method to Fabricate Bioabsorbable Scaffolds, Polymer, 36: 837-842.
14.
Roether, J.A. , Gough, J.E., Boccaccini, A.R., Hench, L.L., Maquet, V. and Jerome, R. (2002). Novel Bioresorbable and Bioactive Composites Based on Bioactive Glass and Polylactide Foams for Bone Tissue Engineering, J. Mater. Sci. Mater. Med., 13: 1207-1214.
15.
Spasova, M. , Stoilova, O., Manolova, I., Rashkov, I. and Altankov, G. (2007). Preparation of PLLA/PEG Nanofibers by Electrospinning and Potential Applications, J. Bioact. Compat. Polym., 22: 62-76.
16.
Piras, A.M. , Chiellini, F., Chiellini, E., Nikkola, I. and Ashammakhi, N. (2008). New Multicomponent Bioerodible Electrospun Nanofibers for Dual-controlled Drug Release, J. Bioact. Compat. Polym., 23: 423-443.
17.
Hutmacher, D.W. (2001). Scaffold Design and Fabrication Technologies for Engineering Tissues - State of the Art and Future Perspectives , J. Biomater. Sci. Polym. Ed., 12: 107-124.
18.
Zuo, W.W. , Zhu, M.F., Yang, W., Yu, H., Chen, Y.M. and Zhang, Y. (2005). Experimental Study on Relationship Between Jet Instability and Formation of Beaded Fibers During Electrospinning, Polymer Eng. Sci., 45: 704-709.
19.
Teo, W.E. and Ramakrishna, S. (2006). A Review on Electrospinning Design and Nanofibre Assemblies, Nanotechnology, 17: 89-106.
20.
Jose, M.V., Thomas, V., Johnson, K.T., Dean, D.R. and Nyairo, E. ( 2009). Aligned PLGA/HA Nanofibrous Nanocomposite Scaffolds for Bone Tissue Engineering, Acta Biomater., 5: 305-315.
21.
Li, H.D., Zheng, Q., Xiao, Y.X., Feng, J., Shi, Z.L. and Pan, Z.J. ( 2009). Rat Cartilage Repair Using Nanophase PLGA/HA Composite and Mesenchymal Stem Cells, J. Bioact. Compat. Polym., 24: 83-99.
22.
Nie, H.M. , Soh, B.W., Fu, Y.C. and Wang, C.H. (2008). Three-dimensional Fibrous PLGA/HAp Composite Scaffold for BMP-2 Delivery, Biotechnol. Bioeng., 99: 223-234.
23.
Kawazoe, N. , Lin, X.T., Tateishi, T. and Chen, G.P. (2009). Three-dimensional Cultures of Rat Pancreatic RIN-5F Cell in Porous PLGA-Collagen Hybrid Scaffolds, J. Bioact. Compat. Polym., 24: 25-42.
24.
Sibambo, S.R. , Pillay, V., Choonara, Y.E. and Penny, C. (2008). A Novel Salted-out and Subsequently Crosslinked Poly(Lactic-co-Glycolic Acid) Polymeric Scaffold Applied to Monolithic Drug Delivery, J. Bioact. Compat. Polym. , 23: 132-153.
25.
Harris, L.D. , Kim, B.S. and Mooney, D.J. (1998). Open Pore Biodegradable Matrices Formed With Gas Foaming, J. Biomed. Mater. Res., 42: 396-402.
26.
Huang, Y.C. , Connell, M., Park, Y., Mooney, D.J. and Rice, K.G. (2003). Fabrication and In Vitro Testing of Polymeric Delivery System for Condensed DNA, J. Biomed. Mater. Res. A, 67: 1384-1392.
27.
Bini, T.B., Gao, S.J., Tan, T.C., Wang, S., Lim, A., Hai, L.B. et al. (2004). Electrospun Poly(L-Lactide-co-Glycolide) Biodegradable Polymer Nanofibre Tubes for Peripheral Nerve Regeneration, Nanotechnology, 15: 1459-1464.
28.
Jeonga, S.I. , Kimb, S.Y., Choa, S.K., Chonga, M.S., Kimc, K.S., Kimd, H. et al. (2007). Tissue-Engineered Vascular Grafts Composed of Marine Collagen and PLGA Fibers Using Pulsatile Perfusion Bioreactors, Biomaterials, 28: 1115-1122.
29.
Wan, Y.Q. , Qu, X., Lu, J., Zhu, C.F., Wan, L.J., Yang, J.L. et al. (2004). Characterization of Surface Property of Poly(Lactide-co-Glycolide) After Oxygen Plasma Treatment , Biomaterials, 25: 4777-4783.
30.
Gupta, D., Venugopal, J., Mitra, S., Giri Dev, V.R. and Ramakrishna, S. ( 2009). Nanostructured Biocomposite Substrates by Electrospinning and Electrospraying for the Mineralization of Osteoblasts, Biomaterials, 30: 2085-2094.
31.
Sui, G., Yang, X.P., Mei, F., Hu, X.Y., Chen, G.Q., Deng, X.L. et al. (2007). Poly-L-Lactic Acid/Hydroxyapatite Hybrid Membrane for Bone Tissue Regeneration, J. Biomed. Mater. Res. A, 82: 445-454.
32.
Thostenson, E.T. , Ren, Z. and Chou, T.W. (2001). Advances in Science and Technology of Carbon Nanotubes and their Composites: A Review, Compos . Sci. Technol., 61: 1899-1912.
33.
Collins, P.G. and Avouris, P. (2002). Nanotubes for Electronics , Sci. Am., 283: 62-69.
34.
Dzenis, Y. ( 2004). Spinning Continuous Fibers for Nanotechnology, Science, 304: 1917-1919.
35.
Pan, C., Ge, L.Q. and Gu, Z.Z. ( 2007). Fabrication of Multi-walled Carbon Nanotube Reinforced Polyelectrolyte Hollow Nanofibers by Electrospinning, Compos. Sci. Technol., 67: 3271-3277.
36.
Iijima, S. ( 1991). Helical Microtubules of Graphitic Carbon, Nature, 354: 56-58.
37.
Baughman, R.H. , Zakhidov, A.A. and de Heer, W.A. (2002). Carbon Nanotubes - The Route Toward Applications, Science, 297: 787-792.
38.
Bachtold, A. , Fuhrer, M.S., Plyasunov, S., Forero, M., Anderson, E.H., Zettl, A. et al. (2000). Scanned Probe Microscopy of Electronic Transport in Carbon Nanotubes, Phys. Rev. Lett., 84: 6082-6085.
39.
Durkop, T., Getty, S.A., Cobas, E. and Fuhrer, M.S. ( 2004). Extraordinary Mobility in Semiconducting Carbon Nanotubes , Nano. Lett., 4: 35-39.
40.
Czajkowska, B. and Blazewicz, M. (1997). Phagocytosis of Chemically Modified Carbon Materials, Biomaterials, 1: 69-74.
41.
Pricea, R.L. , Waidb, M.C., Haberstroha, K.M. and Webstera, T.J. (2003). Selective Bone Cell Adhesion on Formulations Containing Carbon Nanofibers, Biomaterials , 24: 1877-1887.
42.
Balania, K. , Andersonb, R., Lahaa, T., Andaraa, M., Terceroa, J., Crumplerb, E. et al. (2007). Plasma-sprayed Carbon Nanotube Reinforced Hydroxyapatite Coatings and their Interaction with Human Osteoblasts In Vitro, Biomaterials, 28: 618-624.
43.
Chłopek, J., Czajkowska, B., Szaraniec, B., Frackowiak, E., Szostak, K. and Béguin , F. (2006). In Vitro Studies of Carbon Nanotubes Biocompatibility, Carbon , 44: 1106-1111.
44.
Meng, H., Sui, G.X., Fang, P.F. and Yang, R. ( 2008). Effects of Acid- and Diamine-modified MWNTs on the Mechanical Properties and Crystallization Behavior of Polyamide 6, Polymer , 49: 610-620.
45.
Lee, G.W. , Kim, J., Yoon, J., Bae, J.S., Shin, B.C. and Kim, I.S. (2008). Structural Characterization of Carboxylated Multi-walled Carbon Nanotubes, Thin Solid Films, 516: 5781-5784.
46.
Hohman, M.M. , Shin, M., Rutledge, G. and Brenner, M.P. (2001). Electrospinning and Electrically Forced Jet. I. Stability Theory, Phys. Fluids , 13: 2201-2220.
47.
Hohman, M.M., Shin, M., Rutledge, G. and Brenner, M.P. ( 2001). Electrospinning and Electrically Forced Jet. II. Applications, Phys. Fluids, 13: 2221-2236.
48.
Baumgarten, P.K. (1971). Electrostatics Spinning of Acrylic Microfiber, J. Colloid Interface Sci., 36: 71-79.
49.
Boland, E.D., Wnek, G.E., Simpson, D.G., Pawlowski, K.J. and Bowlin, G.L. ( 2001). Tailoring Tissue Engineering Scaffolds Using Electrostatic Processing Techniques: A Study of Poly(Glycolic Acid) Electrospinning, J. Macromol. Sci. Pure Appl. Chem., 38: 1231-1243.
