Study of the Combustion and Fire Retardancy of Polyacrylonitrile and Its Copolymers by Using Cone Calorimetry

Abstract

The combustion and fire retardancy behaviour of polyacryloni trile and its fibre-forming copolymers have been studied using the cone calorimetry technique. The heat release rates of the polymers are characterised by two high peaks. The first one occurs at the beginning of flaming combustion while the other occurs close to extinction. However, the initial peak is sig nificantly reduced by the addition of comonomers such as methyl acrylate and vinyl acetate, or flame retardants such as ammonium polyphosphate. The study shows that the high initial peak during combustion is closely related to the intensive exotherm of the polymers during pyrolysis. It is suggested that the intensive exotherm leads to rapid decomposition of the polymer chains and consequently results in the high initial peak of heat release rates. The two selected flame retardants, ammonium polyphosphate (APP) and decabromo diphenyl oxide (Deca) show a high efficiency in reducing the heat release rates. The APP mainly reduces the initial peak while Deca diminishes the last peak significantly, demonstrating two completely different retarding mechanisms.

Keywords

polyacrylonitrile copolymer cone calorimeter flame retar dants heat release rate ignitibility smoke.

Get full access to this article

View all access options for this article.

References

Bach, H.C. and R.S. Knorr. 1985. "Acrylic Fibres," Encyclopedia of Polymer Science and Technology, Second Edition, H. F. Mark , N. M. Bikales , C. G. Overberger and G. Menges , eds., New York: John Wiley & Sons Inc., 1:334-388.

Torrance, B.J.D. and K. Wade. 1971. "Acrylic Fibres ," Reports on the Progress of Applied Chemistry, 56:77-88.

Poynton, D.J. 1976. "Acrylic Fibres," Text. Prog., 8(1):51-60.

Balasubramanian, S. 1979. "Recent Development in Acrylic Fibres," Man-Made Textiles in India, 22(4):191-202.

Zhang, J. , M.E. Hall and A.R. Horrocks. 1993. "The Flammability of Polyacrylonitrile and Its Copolymers I. The Flammability Assessment Using Pressed Powdered Polymer Samples," J. Fire Science, 11:442-455.

Horrocks, A.R. , J. Zhang and M.E. Hall. 1994. "The Flammability of Polyacrylonitrile and Its Copolymers II. Thermal Behaviour and Mechanism of Degradation," Polymer International, 33:303-314.

Hall, M.E. , J. Zhang and A.R. Horrocks. 1994. "The Flammability of Polyacrylonitrile and Its Copolymers III. Effect of Flame Retardants," Fire and Materials, 18:231-241.

Thomas, P.H. 1988. "How Heat Release Influences Fire Hazard," International Conference "FIRE: Control the Heat-Reduce the Hazard ," Fire Research Station, London , 24-25 October, 1988, Paper 1.

Babrauskas, V. 1988. "Effective Measurement Techniques for Heat, Smoke and Toxic Fire Gases," International Conference "FIRE: Control the Heat-Reduce the Hazard," Fire Research Station , London, 24-25 October, 1988, Paper 4.

10.

Hirschler, M.M. 1992. "Heat Release from Plastic Materials," in Heat Release in Fires, Chapter 12(a, V. Babrauskas and S. J. Grayson , eds., London : Elsevier Applied Science, pp. 375-422.

11.

Scudamore, M.J. , P.J. Briggs and F.H. Prager. 1991. "Cone Calorimetry-A Review of Tests Carried out on Plastics for the Association of Plastic Manufacturers in Europe," Fire and Materials, 15:65-84.

12.

Matheson, A.F. and M.A. Barnes. 1994. "Halogenated Materials Fire Project Report," Reduced Fire Hazard Cables Conference, Birmingham, U.K., 23 March, 1994.

13.

Babrauskas, V. 1984. "Development of the Cone Calorimeter-A Bench-Scale Heat Release Rate Apparatus Based on Oxygen Consumption ," Fire and Materials, 8:81-94.

14.

ISO/DIS 5660-1990. "Fire Tests-Reaction to Fire-Rate of Heat Release from Building Products," International Standards Organization (ISO), Geneva 1991.

15.

Beyler, C. 1988. "Thermal Decomposition of Polymers," in The SFPE Handbook of Fire Protection Engineering, Chapter 12, P. J. DiNenno , ed., Quincy, MA: National Fire Protection Association Press, Section 1, pp. 165-178.

16.

Babrauskas, V. 1991. "Heats of Combustion and Related Properties for Plastics," Appendixes in Fire Protection Handbook, 17th Edition, A. E. Cote and J. L. Linville , eds., Quincy, MA: National Fire Protection Association Press, Table A-2.

17.

Silcock, G.W.H. and T.J. Shields. In press. "A Protocol for Analysis of Time to Ignition Data from Bench Scale Tests," Fire Safety Journal.

18.

Zhang, J. , T.J. Shields , A.R. Horrocks and M.E. Hall. 1994. "Flame Retardancy of Polyacrylonitrile and Its Copolymers," The 5th Annual BCC Conference on Flame Retardancy, Stamford, USA, 24-26 May, 1994.