Horizontal Burn Test at Different Oxygen Levels: A Small Scale Screening Test for Flexible Polyurethane Foam with Excellent Correlation to the BS 5852 Part 2 Source 5

Abstract

A Horizontal Burn Test (HBT) has been successfully developed to evaluate the ignition resistance, flame propagation and heat release of a flexi ble polyurethane foam. The test was used to evaluate the combustion charac teristics of foams of different type and density, unfilled or filled with different types of combustion modification additives. The best differentiation between foam samples was found on the basis of relative heat release. On the basis of this measurement and the oxygen ignition index, a correlation between com bustion performance in the Horizontal Burn Test and in the BS 5852 Source 5 Test was established. In this way, the excellent BS 5852 Source 5 performance of melamine-filled high resilience slabstock foams was predicted on the basis of Horizontal Burn Test results. Furthermore, all-MDI foam formulations filled with melamine or other selected solid fillers were defined as alternatives to pass the BS 5852 Source 5 Test.

Get full access to this article

View all access options for this article.

References

Fire tests for furniture: BS 5852: Part 1: 1979. "Methods of Test for the Ignitability by Smokers' Materials of Upholstered Composites for Seating." BS 5852: Part 2: 1982: "Methods of Test for the Ignitability of Upholstered Composites for Seating by Flaming Sources."

California Bureau of Home Furnishings Technical Bulletin 133: Flammability Test Procedure for Seating Furniture for Use in Public Occupancies.

Grace, O.M. , K.E. Mericle , and J.D. Taylor. 1985. "Melamine Modified Polyurethane Foams," Journal of Cellular Plastics, p. 311.

Genz, M. , O.M. Grace , and S. Gagnon. 1987. "New Flame-Resistant Flexible Foams," Proceedings of the SPI—30th Annual Technical/Marketing Conference, pp. 941.

Szabat, J.F. and J.A. Gaetano. 1983. "CMHR Foam for High Risk Occupancies," Proceedings of the SPI-26th Annual Technical/Marketing Conference, p. 326.

Knaub, P.H. and H. Mispreuve. 1989. "Combustion Modified Flexible Polyurethane Slabstock Foams," Proceedings of the SPI—32nd Annual Technical/Marketing Conference , pp. 501-509.

Schrock, K.A. , R. Solis , G.E. Beal , R.G. Skorpenske and D.B. Parrish. 1989. "The Influence of Polymer Morphology and Density on the Combustion of Melamine-Filled Flexible Polyurethane Foams," Proceedings of the SPI—32nd Annual Technical/Marketing Conference, pp. 451-458.

Sullivan, D.A. and J. Televantos. 1989. "Combustion Modified Ultracel Foam for Residential Furniture Cushioning," Proceedings of the SPI—32nd Annual Technical/Marketing Conference , pp. 246-250.

Harakal, M.E. , B.H. Ernst , F.D. Womack , and D.R. Battice. 1989. "Novel Surfactants for Melamine Filled Flexible Polyurethane Foams," Proceedings of the SPI—32nd Annual Technical/Marketing Conference , pp. 515-519.

10.

Haas, P.F. and H.P. Hettel. 1988. "CMHR Foams Based on PHD Polyols to Comply with the United Kingdom Furniture and Furnishings (FIRE) (SAFETY) Regulations 1988, Proceedings of the SPI—31st Annual Technical/Marketing Conference, pp. 490-494.

11.

Franklin, E.C. 1922. Journal of the American Chemical Society, 44:486-509.

12.

Redeman, C.E. 1940. Journal of the American Chemical Society, 62: 942-946.

13.

Kay, M., et al. 1979. "A Review of Intumescent Materials, with Emphasis on Melamine Formation," J. Fire Ret. Chem., Vol. 6.

14.

Batt, A.M. and P. Appleyard. 1989. "The Mechanism and Performance of Combustion Modified Flexible Foams in Small Scale Fire Test," Proceedings of the SPI-32nd Annual Technical/Marketing Conference , pp. 433-442.

15.

Yehaskel, A. 1978. Fire and Flame Retardant Polymers, Noyes Data Corp., Park Ridge NJ, USA, pp. 464.

16.

Idem., ibid., pp. 195, 380.