To ensure fire safety, polymers are filled with flame retardants and smoke suppressants. To meet the highest requirements, it is essential to understand the decomposition of those polymeric materials. This study reveals interactions between polymer, smoke suppressants, and flame retardants, and discusses their impact on the materials’ flame retardancy, smoke emission, smoke toxicity, and particle emission in conventional loadings to provide deeper general understanding. Low melting oxide glass, melem, spherical silica, sepiolite, melamine polyphosphate, and boehmite in an aluminum diethylphosphinate flame-retarded polyamide 6.6 were investigated. All smoke suppressants improve the protective layer and act as an adjuvant. Silica and melem performed best under forced flaming conditions. Spherical silica reduces the peak of heat release rate by 39% and the total heat evolved by 14%, whereas 10 wt% melem lowers the total smoke production by 41%. Melem alters the mode of action of aluminum diethylphosphinate from gas to more condensed phase activity. This change reduces flame inhibition and hence smoke toxicity, but further improves the protective layer due to charring reactions in the decomposition mechanism. In addition, the sizes of the smoke particles decrease because of the prolonged time in the pyrolytic zone. This study highlights that interactions between polymer, flame retardants, and smoke suppressants can significantly determine the smoking and burning behavior.
VelencosoMMBattigAMarkwartJC, et al. Molecular firefighting—how modern phosphorus chemistry can help solve the challenge of flame retardancy. Angew Chem Int Ed Engl2018; 57: 10450–10467.
BraunUBalabanovichAISchartelB, et al. Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites. Polymer2006; 47: 8495–8508.
4.
PerretBPawlowskiKSchartelB.Fire retardancy mechanisms of arylphosphates in polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene: the key role of decomposition temperature. J Therm Anal Calorim2009; 97: 949–958.
5.
SchartelBPerretBDittrichB, et al. Flame retardancy of polymers: the role of specific reactions in the condensed phase. Macromol Mater Eng2016; 301: 9–35.
6.
LewinMWeilED. Mechanisms and modes of action in flame retardancy of polymers. In: HorrocksARPriceD (eds) Fire retardant materials. Cambridge: Woodhead Publishing, 2001, pp. 31–68.
7.
BraunUSchartelBFicheraMA, et al. Flame retardancy mechanisms of aluminium phosphinate in combination with melamine polyphosphate and zinc borate in glass-fibre reinforced polyamide 6,6. Polym Degrad Stab2007; 92: 1528–1545.
8.
MolyneuxSStecAAHullTR.The effect of gas phase flame retardants on fire effluent toxicity. Polym Degrad Stabil2014; 106: 36–46.
9.
HullTRStecAALebekK, et al. Factors affecting the combustion toxicity of polymeric materials. Polym Degrad Stabil2007; 92: 2239–2246.
10.
GollerSMKrügerSSchartelB.No business as usual: the effect of smoke suppressants commonly used in the flame retardant PA6.6 on smoke and fire properties. Polym Degrad Stabil2023; 209: 110276.
11.
KönigAFehrenbacherUKrokeE, et al. Thermal decomposition behavior of the flame retardant melamine in slabstock flexible polyurethane foams. J Fire Sci2009; 27: 187–211.
12.
LuSZhouWYangM, et al. Preparation and flame-retardant mechanism of polyheptazine/PA6 nanocmposites. Polymer2019; 182: 121810.
13.
LevchikSVLevchikGFBalabanovichAI, et al. Mechanistic study of combustion performance and thermal decomposition behaviour of nylon 6 with added halogen-free fire retardants. Polym Degrad Stabil1996; 54: 217–222.
14.
DuquesneSLe BrasMBourbigotS, et al. Mechanism of fire retardancy of polyurethanes using ammonium polyphosphate. JAppl Polym Sci2001; 82: 3262–3274.
15.
BraunUSchartelB.Effect of red phosphorus and melamine polyphosphate on the fire behavior of HIPS. J Fire Sci2005; 23: 5–30.
16.
LevchikSVWeilEDLewinM.Thermal decomposition of aliphatic nylons. Polym Int1999; 48: 532–557.
17.
SonnierROtazaghineBFerryL, et al. Study of the combustion efficiency of polymers using a pyrolysis–combustion flow calorimeter. Combust Flame2013; 160: 2182–2193.
18.
HornsbyP.Fire-retardant fillers. In: WilkieCAMorganAB (eds) Fire retardancy of polymeric materials. 2nd ed.New York: CRC Press, 2010, pp. 163–185.
19.
LinX-BDuS-LLongJ-W, et al. A novel organophosphorus hybrid with excellent thermal stability: core–shell structure, hybridization mechanism, and application in flame retarding semi-aromatic polyamide. ACS Appl Mater Interfaces2016; 8: 881–890.
20.
XuZLiuDYanL, et al. Synergistic effect of sepiolite and polyphosphate ester on the fire protection and smoke suppression properties of an amino transparent fire-retardant coating. Prog Organ Coat2020; 141: 105572.
21.
JiangPZhangSBourbigotS, et al. Surface grafting of sepiolite with a phosphaphenanthrene derivative and its flame-retardant mechanism on PLA nanocomposites. Polym Degrad Stabil2019; 165: 68–79.
22.
KroenkeWJ.Low-melting sulphate glasses and glass-ceramics, and their utility as fire and smoke retarder additives for poly(vinyl chloride). J Mater Sci1986; 21: 1123–1133.
23.
TianCMWangHMaZG, et al. Low-melting sulfate glasses as additives to semirigid PVC and their flame retardant and smoke suppressant properties. J Vinyl Add Technol2003; 9: 69–80.
24.
WuGMSchartelBKleemeierM, et al. Flammability of layered silicate epoxy nanocomposites combined with low-melting inorganic ceepree glass. Polym Eng Sci2012; 52: 507–517.
25.
SchmaucksGFriedeBSchreinerH, et al. Amorphous silicon dioxide as addative to improve the fire retardancy of polyamides. In: HullTRKandolaBK (eds) Fire retardancy of polymers—new strategies and mechanisms. Cambridge: The Royal Society of Chemistry, 2009, pp. 35–48.
26.
LevchikSVWeilED. Overview of the recent literature on flame retardancy and smoke suppression in PVC. Polym Adv Technol2005; 16: 707–716.
27.
YanLXuZWangX.Synergistic effects of organically modified montmorillonite on the flame-retardant and smoke suppression properties of transparent intumescent fire-retardant coatings. Prog Organ Coat2018; 122: 107–118.
28.
WuNNiuFLangW, et al. Highly efficient flame-retardant and low-smoke-toxicity poly(vinyl alcohol)/alginate/ montmorillonite composite aerogels by two-step crosslinking strategy. Carbohyd Polym2019; 221: 221–230.
29.
GalloESchartelBSchmaucksG, et al. Effect of well dispersed amorphous silicon dioxide in flame retarded styrene butadiene rubber. Plast Rubber Compos2013; 42: 34–42.
30.
MyersRELicursiE.Inorganic glass forming systems as intumescent flame retardants for organic polymers. J Fire Sci1985; 3: 415–431.
31.
BoradePChakrabortyMDhanabalanA, et al. Flame retardant poly(arylene ether)/polyamide composition. Patent US 2006/0167143 A1, USA, 2006.
32.
BoradePChakrabortyMDhanabalanA, et al. Flame retardant thermoplastic article. Patent US 7608651 B2, USA, 2009.
33.
EndouHNakagawaH.Thermoplastic resin composition. Patent US 6995204 B2, USA, 2006.
34.
WeilEDLevchikSV. Flame retardants for plastics and textiles—practical applications. 2nd ed.Cincinnati, OH: Hanser Publications, 2016.
35.
Abu-AliAFSzylakowskiGRAlbrinckAC.Compositions for riser and plenum cables. Patent AU 2011215703 B2, Australia, 2011
36.
SzylakowskiGAlbrinckAMcLinnMS.Cable having insulation with micro oxide particles. Patent EP 2618339 A2, European Union, 2013
37.
HuangJAbu-AliAFMalkemusJD, et al. Jacket composition for riser and plenum cables. Patent EP 290793 B1, European Union, 2015.
38.
LohRRPlaskyMEDelavizY, et al. Polystyrene foam containing a modifier-free nanoclay and having improved fire protection performance. Patent US 9187608 B2, USA, 2015.
39.
YinY.Flame resistant semiaromatic polyamide resin compositions and articles therefrom. Patent US 2009/0030124 A1, USA, 2009.
40.
BauerRYenerDO.Flame retardant composites. Patent US 8394880 B2, USA, 2013.
41.
SchlosserENassBWanzkeW.Flame-retardant combination. Patent US 6255371 B1, USA, 2001.
42.
JeneweinEKleinerH-JWanzkeW, et al. Synergistic flame protection agent combination for thermoplastic polymers. Patent US 6365071 B1, USA, 2002.
43.
BauerHHoeroldSSickenM.Halogen-free solid flame retardant mixture and use therefor. Patent US 10508238 B2, USA, 2019.
44.
SchneiderFOsterodFBauerH, et al. Mixtures of least one dialkylphosphinic acid with at least one other dialkylphosphinic acid that is diffrent therefrom, method for production, thereof and use thereof. Patent US 10246640 B2, USA, 2019.
45.
SchartelBBartholmaiMKnollU.Some comments on the use of cone calorimeter data. Polym Degrad Stabil2005; 88: 540–547.
46.
PappalardoSRussoPAciernoD, et al. The synergistic effect of organically modified sepiolite in intumescent flame retardant polypropylene. Europ Polym J2016; 76: 196–207.
47.
LevchikSVCostaLCaminoG. Effect of the fire-retardant ammonium polyphosphate on the thermal decomposition of aliphatic polyamides. Part III—polyamides 6.6 and 6.10. Polym Degrad Stabil1994; 43: 43–54.
48.
OzakiS.Recent advances in isocyanate chemistry. Chem Rev1972; 72: 457–496.
49.
DavidDJStaleyHB.Polyurethanes: chemistry and technology—analytical chemistry of the polyurethanes. New York: Wiley-Interscience, 1969.
50.
WilothFSchindlerE. Thermal degradation of nylon 66.2. Thermolysis of n-normal-hexyl-2-normal-hexylimono)cyclopentanone-1-carboxamide—elimination of isocyanate from alpha-carbamolycyclopentanimines. Chem Ber Recl1970; 103: 757–765.
51.
MacKerronDHGordonRP.Minor products from the pyrolysis of thin films of poly(hexamethylene adipamide). Polym Degrad Stabil1985; 12: 277–285.
52.
YoshizawaYSaitôHNukadaK.A direct observation of the crosslinking unit in thermally degraded polyamides. J Polym Sci Pt B Polym Lett1972; 10: 145–151.
53.
WilothF.Zur thermischen Zersetzung von Nylon 6.6. III. Messungen zur Thermolyse von Nylon 6.6 und 6.10. Die Makromolekulare Chemie1971; 144: 283–307.
54.
MinkoffGJTipperCFH. Chemistry of combustion reactions. London: Butterworths, 1962.
55.
SchartelBPawlowskiKHLyonRE.Pyrolysis combustion flow calorimeter: a tool to assess flame retarded PC/ABS materials?Thermochimica Acta2007; 462: 1–14.
56.
PawlowskiKHSchartelBFicheraMA, et al. Flame retardancy mechanisms of bisphenol A bis(diphenyl phosphate) in combination with zinc borate in bisphenol A polycarbonate/acrylonitrile-butadiene-styrene blends. Thermochimica Acta2010; 498: 92–99.
57.
KarraschAWawrzynESchartelB, et al. Solid-state NMR on thermal and fire residues of bisphenol A polycarbonate/silicone acrylate rubber/bisphenol A bis (diphenyl-phosphate)/(PC/SiR/BDP) and PC/SiR/BDP/zinc borate (PC/SiR/BDP/ZnB)–Part I: PC charring and the impact of BDP and ZnB. Polym Degrad Stabil2010; 95: 2525–2533.
58.
CasseeFRMuijserHDuistermaatE, et al. Particle size-dependent total mass deposition in lungs determines inhalation toxicity of cadmium chloride aerosols in rats—application of a multiple path dosimetry model. Arch Toxicol2002; 76: 27720020412–27720020286.
59.
StecAA.Fire toxicity—the elephant in the room?Fire Saf J2017; 91: 79–90.
60.
HullTRStecAA.Introduction to fire toxicity. In: StecAAHullTR (eds) Fire toxicity. Cambridge: Woodhead Publishing, 2010, pp. 3–25.
61.
HornsbyPRWangJRothonR, et al. Thermal decomposition behaviour of polyamide fire-retardant compositions containing magnesium hydroxide filler. Polym Degrad Stabil1996; 51: 235–249.
62.
AudebertPKrokeEPosernC, et al. State of the art in the preparation and properties of molecular monomeric s-heptazines: syntheses, characteristics, and functional applications. Chem Rev2021; 121: 2515–2544.
