Electrical cable sheaths are the most abundant fire load in nuclear power plants, mainly in rooms that are kept in under slight pressure. This configuration leads fires to grow in under-ventilated and vitiated conditions. Assessing fire threat involves characterizing the heat released, responsible for fire growth, and the smoke evolved, which may interact with sensitive components in the area. For that purpose, a revisited controlled-atmosphere cone calorimeter has been designed, set up, and coupled to a Fourier transformed infrared spectrometer and an electrical low-pressure impactor to measure simultaneously the evolved gases and aerosols, respectively. This bench-scale apparatus has been first qualified with polymethylmethacrylate. It has second been used to characterize polyvinylchloride cable sheath representative material reaction to fire in under-ventilated and vitiated conditions. It appeared that vitiation in under-ventilated fires lowers the heat release rate and the fuel mass loss rate.
MelisSAudouinL.Effects of vitiation on the heat release rate in mechanically-ventilated compartment fires. Fire Safety Sci2008; 9: 931–942.
2.
SubudhiM. Literature review of environmental qualification of safety-related electrical cables. Report no. NUREG/CR-6384, vol. 1, part 1, April 1996. Upton, NY: Brookhaven National Laboratory.
3.
WerrelMDeubelJHKrügerS, et al. The calculation of the heat release rate by oxygen consumption in a controlled-atmosphere cone calorimeter. Fire Mater2014; 38: 204–226.
4.
Standard test methods for measurement of synthetic polymer material flammability using a fire propagation apparatus (FPA), https://www.astm.org/e2058-13.html (accessed 13 January 2022).
5.
NF P92-190-1; NF ISO 5660-1:2015. Reaction-to-fire tests—heat release, smoke production and mass loss rate—part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement).
6.
Standard test method for heat and visible smoke release rates for materials, and products using an oxygen consumption calorimeter, https://www.astm.org/e1354-17.html (accessed 13 January 2022).
7.
BabrauskasVTwilleyWHJanssensM, et al. A cone calorimeter for controlled-atmosphere studies. Fire Mater1992; 16: 37–43.
8.
ISO/TS 5660-5:2020(En). Reaction-to-fire tests—heat release, smoke production and mass loss rate—part 5: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres.
9.
MarquisDGuillaumeELesenechalD.Accuracy (trueness and precision) of cone calorimeter tests with and without a vitiated air enclosure. Procedia Engineer2013; 62: 103–119.
10.
MarquisDMHermouetFGuillaumeÉ.Effects of reduced oxygen environment on the reaction to fire of a poly(urethane-isocyanurate) foam: reaction to fire of PIR foam. Fire Mater2017; 41: 245–274.
11.
FourneauCDelvosalleCBreuletH, et al. Characterization of highly under-ventilated fires using the cone calorimeter. Fire Mater2016; 40: 434–444.
12.
BartonJRiosORuneforsM, et al. The effect of oxygen concentration on selected industrial products in the open controlled atmosphere cone calorimeter. Fire Mater. Epub ahead of print 13 July 2021. DOI: 10.1002/fam.3006.
13.
BejiTHelsonORogaumeT, et al. Experimental and numerical study on the evaporation rates of liquid fuels using a controlled atmosphere cone calorimeter. Fire Safety J2021; 121: 103317.
14.
BrayRJBartonJMadsenD, et al.Burning material behaviour in hypoxic environments: an experimental study examining a representative storage arrangement of acrylonitrile butadiene styrene, polyethylene bubble wrap, and cardboard layers as a composite system. Fire Mater2022; 46: 313–328.
15.
HermouetFRogaumeTGuillaumeE, et al. Experimental characterization of the reaction-to-fire of an Acrylonitrile-Butadiene-Styrene (ABS) material using controlled atmosphere cone calorimeter. Fire Safety J2021; 121: 103291.
StecAAHullTRLebekK, et al. The effect of temperature and ventilation condition on the toxic product yields from burning polymers. Fire Mater2008; 32: 49–60.
18.
ChatenetSLemesleMMongruelS.Enceinte de Sous-Ventilation Pour l’étude de la Décomposition Thermique en Atmosphère Contrôlée, 2018. Patent FR3087267.
19.
TewarsonAPionRF.Flammability of plastics—I. Burning intensity. Combust Flame1976; 26: 85–103.
20.
SantoGTamaniniF.Influence of oxygen depletion on the radiative properties of PMMA flames. Symp Int Combust1981; 18: 619–631.
21.
MulhollandGWTwilleyWHBabrauskasV, et al. The effect of oxygen concentration on CO and smoke produced by flames. Fire Safety Science 1991; 3: 585–594 (also published In: Proceedings of the 3rd international symposium on fire safety science, Edinburgh, 8–12 July 1991).
22.
ChristyMRPetrellaRVPenkalaJJ.Controlled-atmosphere cone calorimeter. In: NelsonGL (ed.) Fire and polymers II. Washington, DC: American Chemical Society, 1995, pp. 498–517.
23.
BrohezSMarlairGDelvosalleC.The effect of oxygen concentration on CO and soot yields in fires. Fire Mater2008; 32: 141–158.
24.
PeatrossMJBeylerCL.Ventilation effects on compartment fire characterization. Fire Safety Sci1997; 5: 403–414.
25.
AlibertDCoutinMMenseM, et al. Effect of oxygen concentration on the combustion of horizontally-oriented slabs of PMMA. Fire Safety J2017; 91: 182–190.
26.
MarquisDGuillaumeECamilloA.Effects of oxygen availability on the combustion behaviour of materials in a controlled atmosphere cone calorimeter. Fire Safety Sci2014; 11: 138–151 (also published In: Proceedings of the 11th international symposium on fire safety science, Christchurch, New Zealand, 10–14 February 2014).
27.
TewarsonAJiangFHMorikawaT.Ventilation-controlled combustion of polymers. Combust Flame1993; 95: 151–169.
28.
HietaniemiJKallonenRMikkolaE.Burning characteristics of selected substances: production of heat, smoke and chemical species. Fire Mater1999; 23: 171–185.
29.
FourneauCDelvosalleCBreuletH, et al. Study of under-ventilated burning characteristics of materials with the cone calorimeter. Chem Engineer Trans2013; 31: 871–876.
30.
NgohangFEFontaineGGayL, et al. Revisited investigation of fire behavior of ethylene vinyl acetate/aluminum trihydroxide using a combination of mass loss cone, Fourier transform infrared spectroscopy and electrical low pressure impactor. Polym Degrad Stabil2014; 106: 26–35.
31.
NgohangFEFontaineGGayL, et al. Smoke composition using MLC/FTIR/ELPI: application to flame retarded ethylene vinyl acetate. Polym Degrad Stabil2015; 115: 89–109.
32.
FontaineGNgohangFEGayL, et al. Investigation of the contribution to fire of electrical cable by a revisited mass loss cone. In: HaradaKMatsuyamaKHimotoK, et al. (eds) Fire science and technology 2015. Singapore: Springer, 2017, pp. 687–693.
33.
HuggettC.Estimation of rate of heat release by means of oxygen consumption measurements. Fire Mater1980; 4: 61–65.
34.
ParkerWJ. Calculations of the heat release rate by oxygen consumption for various applications. NBSIR 81-2427-1, March 1982. Washington, DC: National Bureau of Standards.
35.
JanssensML.Measuring rate of heat release by oxygen consumption. Fire Technol1991; 27: 234–249.
36.
JärvinenAAitomaaMRostedtA, et al. Calibration of the new electrical low pressure impactor (ELPI+). J Aerosol Sci2014; 69: 150–159.
37.
Association Française de Normalisation (AFNOR) NF—ISO 19706:2011-11. Lignes Directrices Pour l’évaluation des Dangers du feu Pour les Personnes.
38.
PittsWM.The global equivalence ratio concept and the formation mechanisms of carbon monoxide in enclosure fires. Prog Energ Combust1995; 21: 197–237.
39.
PatelPHullTRStecAA.Influence of physical properties on polymer flammability in the cone calorimeter. Polym Advan Technol2011; 22: 1100–1107.
40.
TewarsonALeeJLPionRF. The influence of oxygen concentration on fuel parameters for fire modeling. In: Proceedings of the 18th symposium (international) on combustion, Waterloo, ON, Canada, 17–22 August 1980.
41.
KashiwagiTOhlemillerTJ. A study of oxygen effects on non flaming transient gasification of PMMA and PE during thermal irradiation. In: Proceedings of the 19th symposium (international) on combustion, Haifa, Israel, 8–13 August 1982, pp. 815–823. Pittsburgh, PA: The Combustion Institute.
42.
KashiwagiT.Polymer combustion and flammability—role of the condensed phase. Symp Int Combust 1994; 25: 1423–1437 (also published In: Proceedings of the 25th symposium (international) on combustion, Irvine, CA, 31 July–5 August 1994).
43.
TewarsonA. Chapter 4: generation of heat and chemical compounds in fires. In: DiNennoPJ (ed.) SFPE handbook of fire protection engineering, vol. section 3. Berlin: Springer Nature, 1995, pp. 3–53 to pp. 3–124.
