In an ISO 5660 Cone Calorimeter, heat fluxes were applied to a polyvinyl chloride–based floor covering to characterize their influence on the thermal decomposition parameters as well as on the concentrations of species emitted during the combustion process. Gas concentrations were quantified for identifying the fire behaviour and the decomposition chemistry. Thus, carbon monoxide, carbon dioxide, water, hydrogen chloride and oxygen with concentrations and emission yields of high consistency were encountered at all heat fluxes considered. Moreover, nitrogen monoxide, sulphur dioxide, hydrogen cyanide and lightweight hydrocarbons were observed with low concentrations and emission yields. Other species can be considered as negligible due to their concentrations close to zero at all heat fluxes studied. Furthermore, using the oxygen consumption method, heat release rate, total heat release and effective heat of combustion were also calculated for each irradiance level and were compared with data found in the literature.
BeyerG. Flame retardancy of thermoplastic polyurethane and polyvinyl chloride by organoclays. J Fire Sci2007; 25: 65–78.
2.
HanLWuWQuH, et al. Metallic ferrites as flame retardants and smoke suppressants in flexible poly(vinyl chloride). J Therm Anal Calorim2016; 123: 293–300.
3.
LiuJQinJHuangX, et al. Experimental study on suppressing PVC fire with water mist in a confined space. Polym Degrad Stab2007; 92: 747–751.
4.
YangZLiBTangF. Influence of Cu2+-organic montmorillonites on thermal decomposition and smoke emission of poly(vinyl chloride) by cone calorimetric study. J Vinyl Addit Techn2007; 13(1): 31–39.
5.
JiaPFengGBoC, et al. A composition of phosphaphenanthrene groups-containing castor-oil-based phosphate plasticizer for PVC: synthesis, characterization and property. J Ind Eng Chem2018; 60: 192–205.
6.
ZhangZWuWZhangM, et al. Hydrothermal synthesis of 4ZnOãB2O3ãH2O/RGO hybrid material and its flame retardant behavior in flexible PVC and magnesium hydroxide composites. Appl Surf Sci2017; 425: 896–904.
7.
WangY-HWuW-HYangG, et al. Two kinds of activated carbon spheres-supported metal oxides for reducing smoke release volume and fire hazard in flexible poly(vinyl chloride). J Therm Anal Calorim2019; 135: 2101–2110.
8.
WangZHuangZLiX, et al. A nano graphene oxide/α-zirconium phosphate hybrid for rigid polyvinyl chloride foams with simultaneously improved mechanical strengths, smoke suppression, flame retardancy and thermal stability. Compos Part A2019; 121: 180–188.
9.
XuQJinCZacharM, et al. Test flammability of PVC wall panel with cone calorimetry. Procedia Eng2013; 62: 754–759.
10.
WeilEDLevchikSMoyP. Flame and smoke retardants in vinyl chloride polymers – commercial usage and current developments. J Fire Sci2006; 24: 211–236.
11.
ChowWKQinJHanSS. Bench scale tests on controlling plastic fires with water mists. Chem Eng Technol2005; 28(9): 1041–1047.
12.
JohanssonPAxelssonJHertzbergT. The influence of floor materials in room fires. Brandforsk project no. 300-061, September2007. Borås: SP Technical Research Institute of Sweden, Fire Technology.
13.
HertzbergTBlomqvistPTuovinenH. Reconstruction of an Arson Hospital Fire. Fire Mater2007; 31(4): 225–240.
14.
IngasonHWickströmUVan HeesP. The Gothenburg discotheque fire investigation. In: Proceedings of the 9th international interflam conference: interflam, vol. 2, Edinburgh, 17–19 September 2001, pp. 965-976. Borås: SP Swedish National Testing and Research Institute.
15.
KimJLeeJ-HKimS. Estimating the fire behavior of wood flooring using a cone calorimeter. J Therm Anal Calorim2012; 110: 677–683.
16.
ZhangYFangYXinH, et al. Experimental study of the interaction between the water mists and PVC fire. Process Saf Environ2007; 85(1): 39–44.
17.
ChowCLChowWKFongNK, et al. Assessing fire behaviour of common building materials with a cone calorimeter. Int J Archit Sci2004; 5(4): 91–98.
18.
ChowCLFongNKHanSS. Assessing burning behaviour of common building materials by a cone calorimeter. Int J Eng Perform-Based Fire Codes2005; 7(3): 97–106.
19.
LiuCLuoYFJiaZX, et al. Thermal degradation behaviors of poly(vinyl chloride)/halloysite nanotubes nanocomposites. Int J Polym Mater2013; 62: 128–132.
20.
CoakerAW. Fire and flame retardants for PVC. J Vinyl Addit Techn2003; 9: 108–115.
21.
FangYWangQGuoC, et al. Effect of zinc borate and wood flour on thermal degradation and fire retardancy of polyvinyl chloride (PVC) composites. J Anal Appl Pyrol2013; 100: 230–236.
22.
StarnesWHJrPikeRDColeJR, et al. Cone calorimetric study of copper-promoted smoke suppression and fire retardance of poly(vinyl chloride). Polym Degrad Stab2003; 82: 15–24.
23.
MengWDongYLiJ, et al. Bio-based phytic acid and tannic acid chelate-mediated interfacial assembly of Mg(OH)2 for simultaneously improved flame retardancy, smoke suppression and mechanical properties of PVC. Compos Part B2020; 188: 107854.
24.
QuHLiuCWuW, et al. Using cone calorimeter to study thermal degradation of flexible PVC filled with zinc ferrite and Mg(OH)2. J Therm Anal Calorim2014; 115: 1081–1087.
25.
ZhangJWangXZhangF, et al. Estimation of heat release rate for polymer–filler composites by cone calorimetry. Polym Test2004; 23: 225–230.
26.
ZhengXCusackPA. Tin-containing layered double hydroxides: synthesis and application in poly(vinyl chloride) cable formulations. Fire Mater2013; 37: 35–45.
27.
JiaPHuLFengG, et al. Design and synthesis of a castor oil based plasticizer containing THEIC and diethyl phosphate groups for the preparation of flame-retardant PVC materials. R Soc Chem Adv2017; 7: 897–903.
28.
LiBWangJ. A cone calorimetric study of flame retardance and smoke emission of PVC. I. The effect of cuprous and molybdic oxides. J Fire Sci1997; 15: 341–357.
29.
LiBWangJ. Effect of cuprous oxide in combination with molybdenum trioxide on smoke suppression in rigid poly(vinyl chloride). J Vinyl Addit Techn2001; 7(1): 37–42.
30.
LiB. A study of the thermal decomposition and smoke suppression of poly(vinyl chloride) treated with metal oxides using a cone calorimeter at a high incident heat flux. Polym Degrad Stab2002; 78: 349–356.
31.
LiB. Influence of polymer additives on thermal decomposition and smoke emission of poly(vinyl chloride). Polym Degrad Stab2003; 82: 467–476.
32.
PanY-TWangXLiZ, et al. A facile approach towards large-scale synthesis of hierarchically nanoporous SnO2@Fe2O3 0D/1D hybrid and its effect on flammability, thermal stability and mechanical property of flexible poly(vinyl chloride). Compos Part B2017; 110: 46–55.
33.
RodolfoAJrMeiLHI. Poly(vinyl chloride)/metallic oxides/organically modified montmorillonite nanocomposites: fire and smoke behavior. J Appl Polym Sci2010; 116: 946–958.
34.
RodolfoAJrMeiLHI. Metallic oxides as fire retardants and smoke suppressants in flexible poly(vinyl chloride). J Appl Polym Sci2010; 118: 2613–2623.
35.
WangJLiB. An XPS investigation of thermal degradation and charring in combustion of PVC and PVC/Cu2O/MoO3-the synergy between MoO3 and Cu2O in PVC. Polym Degrad Stab1999; 63: 279–285.
36.
GaoTChenLLiZ, et al. Preparation of zinc hydroxystannate-decorated graphene oxide nanohybrids and their synergistic reinforcement on reducing fire hazards of flexible poly(vinyl chloride). Nanoscale Res Lett2016; 11: 192–201.
37.
SchartelBKunzeRNeubertD, et al. ZnS as fire retardant in plasticised PVC. Polym Int2002; 51: 213–222.
38.
ZhangBJiangYHanJ. The core-double-shell microcapsules flame retardant: synthesis and its application for polyvinyl chloride composites. J Phys Chem Solids2017; 111: 391–402.
39.
PiHGuoSYNingY. Mechanochemical improvement of the flame-retardant and mechanical properties of zinc borate and zinc borate–aluminum trihydrate-filled poly(vinyl chloride). J Appl Polym Sci2003; 89: 753–762.
40.
AwadWHBeyerGBenderlyD, et al. Material properties of nanoclay PVC composites. Polymer2009; 50: 1857–1867.
41.
BeyerG. Organoclays as flame retardants for PVC. Polym Adv Technol2008; 19: 485–488.
42.
LiangZ-MWanC-YZhangY, et al. PVC/montmorillonite nanocomposites based on a thermally stable, rigid-rod aromatic amine modifier. J Appl Polym Sci2004; 92: 567–575.
43.
WangDParlowDYaoQ, et al. Melt blending preparation of PVC-sodium clay nanocomposites. J Vinyl Addit Techn2002; 8(2): 139–150.
44.
FockeWWMuiamboHMhikeW, et al. Flexible PVC flame retarded with expandable graphite. Polym Degrad Stab2014; 100: 63–69.
45.
HaoYHouPLiG, et al. Effect of base-deposited graphene oxide on the thermal stabilization of poly(vinylchloride). Polym In2016; 65: 125–132.
46.
MingPSongZGongS, et al. Nacre-inspired integrated nanocomposites with fire retardant properties by graphene oxide and montmorillonite. J Mater Chem A2015; 3: 21194–21200.
47.
NakagawaY. Recent development of flame retardant polymeric materials containing expandable graphite. Bull Japan Assoc Fire Sci Eng2006; 56: 37–43.
48.
ISO 5660-1:2002. Reaction to fire tests – heat release, smoke production and mass loss rate – part 1: heat release rate (cone calorimeter method).
49.
ISO/TR 5660-3:2003. Reaction to fire tests – heat release, smoke production and mass loss rate – part 3: guidance on measurement.
50.
ISO 17554:1998. International standard – fire tests – reaction to fire – mass loss measurement.
51.
LucheJRogaumeTRichardF, et al. Characterization of thermal properties and analysis of combustion behavior of PMMA in a cone calorimeter. Fire Safety J2011; 46: 451–461.
JanssensML. Measuring rate of heat release by oxygen consumption. Fire Technol1991; 27: 234–249.
54.
HugettC. Estimation of rate of heat release by means of oxygen consumption measurements. Fire Mater1980; 4(2): 61–65.
55.
BabrauskasVPeacockR. Heat release rate: the single most important variable in fire hazard. Fire Safety J1992; 18: 255–272.
56.
BabrauskasV. Ignition handbook. Issaquah, WA: Fire Sciences Publishers, 2003.
57.
JanssensML. Calorimetry (section 3, chapter 2). In: DiNennoPJ (ed.) SFPE handbook of fire protection engineering. 3rd ed.Quincy, MA: NFPA, 2002, pp. 3.38–3.62.
58.
CremonaP. Caractérisation Expérimentale et Numérique des Scénarii de Feu Impliquant un Conduit de Fumée d’Appareils de Combustion Bois. PhD Thesis, University of Poitiers – ENSMA, Poitiers, 2017.
59.
HermouetF. Développement d’une Approche Innovante de Modélisation de la Cinétique de Décomposition Thermique des Matériaux Solides en Espaces Confinés Sous-Ventilés. Application Aux Incendies En Tunnel. PhD Thesis, University of Poitiers – ENSMA, Poitiers, 2015.
60.
HakkarainenTMikkolaELaperreJ, et al. Smoke gas analysis by Fourier transform infrared spectroscopy. The SAFIR Project, European Commission Research program contract number SMT 4-CT96-2136, 1999. Espoo: Technical Research Centre of Finland, Valtron Teknillinen Tutkimuskesus.
61.
ISO 19702:2006. Toxicity testing of fire effluents – guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis.
62.
FardellPGuillaumeE. Sampling and measurement of toxic fire effluents (chapter 11). In: StecAHullR (eds) Fire toxicity. Sawston: Woodhead Publishing, 2010, pp. 385–423.
63.
SpeitelL. Fourier transform infrared analysis of combustion gases. J Fire Sci2002; 20: 349–371.
GuillaumeESaragozaL. Application of FTIR analysers to fire gases – progress in apparatus and method validation for quantitative analysis. In: Proceedings of the 14th international conference on fire and materials, San Francisco, CA, 2–4 February 2015.
66.
PottelH. Quantitative models for prediction of toxic component concentrations in smoke gases from FTIR spectra. Fire Mater1996; 20(6): 273–291.
67.
PottelH. The use of partial least squares (PLS) in quantitative FTIR: determination of gas concentrations in smoke gases of burning textiles. Fire Mater1995; 19(5): 221–231.
68.
StecAAFardellPBlomqvistP, et al. Quantification of fire gases by FTIR: experimental characterisation of calibration systems. Fire Safety J2011; 46(5): 225–233.
69.
RogaumeTBustamante ValenciaLGuillaumeE, et al. Development of the thermal decomposition mechanism of polyether polyurethane foam using both condensed and gas-phase release data. Combust Sci Technol2011; 183: 627–644.
70.
Bustamante ValenciaL. Experimental and numerical investigation of the thermal decomposition of materials at three scales: application to polyether polyurethane foam used in upholstered furniture. PhD Thesis, University of Poitiers – ENSMA, Poitiers, 2010.
71.
QuintiereJG. Fundamentals of fire phenomena. New York: John Wiley & Sons Ltd, 2006.
72.
DrysdaleD. An introduction to fire dynamics. 3rd ed.New York: Wiley, 2011.
73.
TewarsonA. Generation of heat and chemical compounds in fires (section 3, chapter 4). In: DiNennoPJ (ed.) SFPE handbook of fire protection engineering. 3rd ed. Quincy, MA: NFPA, 2002, pp. 3.82–3.161.
74.
JanssensMLKimbleJMurphyD. Computer tools to determine material properties for fire growth modeling from cone calorimeter data. In: Proceedings of 8th international conference: fire and materials 2003, San Francisco, CA, 27–28 January 2003, pp. 377-387. London: Interscience Communications Limited.
75.
TsaiT-HLiM-JShihI-Y, et al. Experimental and numerical study of autoignition and pilot ignition of PMMA plates in a cone calorimeter. Combust Flame2001; 124: 466–480.
76.
DelichatsiosMA. Piloted ignition times, critical heat fluxes and mass loss rates at reduced oxygen atmospheres. Fire Safety J2005; 40: 197–212.
77.
SpearpointMJQuintiereJG. Predicting the piloted ignition of wood in the cone calorimeter using an integral model – effect of species, grain orientation and heat flux. Fire Safety J2001; 36: 391–415.
78.
ISO/TR 20118:2019. Plastics – guidance on fire characteristics and fire performance of PVC materials used in building applications.
79.
ScudamoreMJBriggsPJPragerFH. Cone calorimetry-a review of tests carried out on plastics for the association of plastic manufacturers in Europe. Fire Mater1991; 15: 65–84.
80.
GoffLJ. Analysis of polymers using the cone calorimeter. In: LemstraPJKleintjensLA (eds) Integration of fundamental polymer science and technology. Vol. 5. Berlin: Springer, 1991, pp. 311–315.
81.
GoffLJ. Investigation of polymeric materials using the cone calorimeter. Polym Eng Sci1993; 33(8): 497–500.
82.
NakagawaY. A comparative study of bench-scale flammability properties of electric cables with different covering materials. J Fire Sci1998; 16: 179–205.
83.
WangZHuangPFanW, et al. Measurements on the fire behaviour of PVC sheets using the cone calorimeter. In: Proceedings of Asia-Oceania symposium on fire science and technology, international association for fire safety science, 1988, http://iafss.org/publications/aofst/3/221/view/aofst_3-221.pdf
84.
MorganABBundyM. Cone calorimeter analysis of UL-94 V-rated plastics. Fire Mater2007; 31: 257–283.
EmanuelssonVSimonsonMGevertT. The effect of accelerated ageing of building wires. Fire Mater2007; 31: 311–326.
87.
FengGHuYJiaP, et al. Influence of a nitrogen-containing oil-based plasticizer on mechanical, thermal stability and fire performance of plasticized poly(vinyl chloride) and study of its mechanism of flame retardancy with Py–GC/MS. Ind Crop Prod2015; 77: 883–894.
88.
JiaPZhangMHuL, et al. Thermal degradation behavior and flame retardant mechanism of poly(vinyl chloride) plasticized with a soybean-oil-based plasticizer containing phosphaphenanthrene groups. Polym Degrad Stab2015; 121: 292–302.
89.
BakhtiyariSTaghi-AkbariLJamali AshtianiM. Evaluation of thermal fire hazard of 10 polymeric building materials and proposing a classification method based on cone calorimeter results. Fire Mater2015; 39: 1–13.
90.
BabrauskasVTwilleyWHParkerWJ. The effects of specimen edge conditions on heat release rate. Fire Mater1993; 19(2): 51–63.
91.
FangYWangQBaiX, et al. Thermal and burning properties of wood flour-poly(vinyl chloride) composite. J Therm Anal Calorim2012; 109: 1577–1585.
92.
StoliarovSICrowleySWaltersRN, et al. Prediction of the burning rates of charring polymers. Combust Flame2010; 157: 2024–2034.
93.
ThomsonKWRodrigoPDDPrestonCM, et al. In the firing line: ceramifying polymers enhance strength of intumescent coatings. Eur Coat J2006; 12(6): 34–40.
94.
PattonJS. Fire and smoke corrosivity of metals. J Fire Sci1991; 9: 149–161.
95.
PattonJS. Fire and smoke corrosivity of structural materials. J Fire Sci1992; 10: 294–322.
96.
YuBLiuMLuL, et al. Fire hazard evaluation of thermoplastics based on analytic hierarchy process (AHP) method. Fire Mater2010; 34: 251–260.
97.
PanY-TWangD-Y. Fabrication of low-fire-hazard flexible poly (vinyl chloride) via reutilization of heavy metal biosorbents. J Hazard Mater2017; 339: 143–153.
98.
ISO 19706:2007. Guidelines for assessing the fire threat to people.
KallonenR. Smoke gas analysis by FTIR method. Preliminary investigation. J Fire Sci1990; 8: 343–360.
101.
Al-SayeghWAAljumaiahOAndrewsGE, et al. PVC cable fire toxicity using the cone calorimeter. In: Proceedings of the IAFSS, 10th Asia-Oceania symposium on fire science and technology (AOSFST), Tsukuba, Japan, 5–7 October 2015.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
