The main objective of this work is to present a numerical model to predict the effect of wood density in unprotected wood connections with an internal steel plate (wood–steel–wood), when comparing with the same connections using passive protection with gypsum plasterboard, submitted to fire conditions. Wood–steel–wood connections are made of four wood members, two on each side, with an internal steel plate that connects the pieces using steel dowel fasteners. First, analytical methodologies according to Eurocode 5 part 1-1 were used to design the connections at room temperature. After that, to predict the fire exposure and the connection ability, a numerical model was performed which permits to compare the fire resistance in wood–steel–wood connections without and with passive protection following the Eurocode 5 part 1-2. Results of the temperature and the wood char layer depth were compared using three different wood densities. The evolution of the charring rate was calculated in different locations of the connections and compared with the analytical value proposed by the Eurocode 5 part 1-2.
ParkJSLeJJ. Fire resistance of light-framed wood floors exposed to real and standard fire. J Fire Sci2004; 22: 449–471.
2.
MaraveasCMiamisKMatthaiouCE. Performance of timber connections exposed to fire: a review. Fire Technol2015; 51(6): 1401–1432.
3.
PalmaPFrangiA. Modelling the fire resistance of steel-to-timber dowelled connections loaded perpendicularly to the grain. Fire Safety J2019; 107: 54–74.
4.
FonsecaEMMCoelhoDCSBarreiraLMS. Structural safety in wooden beams under thermal and mechanical loading conditions. Int J Saf Secur Eng2012; 2(3): 242–255.
5.
FonsecaEMMBarreiraLMS. Experimental and numerical method for determining wood char-layer at high temperatures due to an anaerobic heating. Int J Saf Secur Eng2011; 1(1): 65–76.
6.
FonsecaEMMGouveiaPJV. Analysis of simply supported wood beams at ambient and high temperatures. Int J Eng Technol2018; 7(2): 180–183.
7.
LeitePASSilvaLFonsecaEMM. The fire resistance of (W-W-W) wood-to-wood connections protected with different types of gypsum plasterboard. In: 5° Congresso Ibero-Latino-Americano em Segurança Contra Incêndios (eds PilotoPFerreiraDFonsecaE, et al.), Porto, 15–17 July 2019, pp. 543–552. Coimbra: ALBRASCI.
8.
SilvaLLeitePASFonsecaEMM. The density effect in (W-S-W) wood connections with internal steel plate and passive protection under fire. In: 5° Congresso Ibero-Latino-Americano em Segurança Contra Incêndios (eds PilotoPFerreiraDFonsecaE, et al.), Porto, 15–17 July 2019, pp. 563–571. Coimbra: ALBRASCI.
9.
FonsecaEMMSilvaLLeiteP. Fire safety of wood-steel connections. In: 4th international conference on numerical and symbolic computation developments and applications – developments and applications (eds AméliaCBarbosaJIRodriguesJA, et al.), Porto, 11–12 April 2019, pp. 109–118. Guimarães: APMTAC, https://www.researchgate.net/publication/332767052_FIRE_SAFETY_OF_WOOD-STEEL_CONNECTIONS
10.
AissaAFonsecaEMMDanielAPM. W-W-W connections in double-shear at ambient temperature: effect of the applied tensile load and dowels diameter. In: 6th international conference on integrity-reliability-failure (eds Silva GomesJFMeguidSA), Lisbon, 22–26 July 2018, pp. 1349–1356. Porto: INEGI/FEUP.
11.
MartinsDARFonsecaEMM. Double-shear W-S-W connections at ambient temperature, with different applied tensile loads and steel dowels diameter. In: 6th international conference on integrity-reliability-failure (eds Silva GomesJFMeguidSA), Lisbon, 22–26 July 2018, pp. 1341–1348. Porto: INEGI/FEUP.
12.
BS EN 1194:1999. Timber structures – glued laminated timber – strength classes and determination of characteristic values.
13.
HopkinDJLennonTEl-RimawiJ, et al. A numerical study of gypsum plasterboard behaviour under standard and natural fire conditions. Fire Mater2012; 36: 107–126.
14.
RahmanianIWangY. Thermal conductivity of gypsum at high temperatures – a combined experimental and numerical approach. Acta Polytech2009; 49(1):16–20.
15.
EN1995-1-1:2004. Eurocode 5. Design of timber structures. Part 1-1: general common rules and rules for buildings.
16.
EN1995-1-2:2004. Eurocode 5. Design of timber structures. Part 1-2: general structural fire design.
17.
EN 1993-1-2:2005. Eurocode 3. Design of steel structures. Part 1-2: general rules – structural fire design.
18.
FrangiASchleiferVFontanaM, et al. Experimental and numerical analysis of gypsum plasterboards in fire. Fire Technol2010; 46: 149–167.
19.
EN1991-1-2:2002. Eurocode 1. Action on structures. Part 1-2: general actions – actions on structures exposed to fire.
20.
PengLHadjisophocleousGMehaffeyJ, et al. On the fire performance of double-shear timber connections. Fire Saf Sci2011; 42: 1207–1218.
21.
MartinsRFonsecaEMM. Fire behaviour of protected W-S-W connections with a steel plate as the central member and different dowels diameter. Int J Sci Technol2018; 4(3): 60–78.
22.
MartinsRFonsecaEMM. W-S-W connections with a steel plate as the central member and different dowels diameter at high temperature. In: 1st Iberic conference on theoretical and experimental mechanics and materials / 11th national congress on experimental mechanics (ed Silva GomesJF), Porto, 4–7 November 2018, pp. 239–248. Porto: INEGI/FEUP.
23.
HarmanKALawsonJR. A study of metal truss plate connectors when exposed to fire. NISTIR 7393, January 2007. Gaithersburg, MD: National Institute of Standards and Technology.
24.
CachimPBFranssenJ-M. Assessment of Eurocode 5 charring rate calculation methods. Fire Technol2010; 46: 169–181.
