Using helium smoke as a surrogate of fire smoke for the study of atrium smoke filling

Abstract

This study developed a method of using pure helium to generate a cold buoyant plume as the surrogate of a fire smoke for the study of the smoke-filling process in an atrium. Aided by the numerical simulations, a series of experiments in a 1:26.5 scale model of the full-size atrium with the fires up to 1.6 MW from the literature were conducted to investigate the similarity between a helium smoke and a hot fire smoke. Helium concentrations, smoke layer heights, and smoke optical densities were compared well between the current experiment and the simulations. The experimental study thus verified the capability of a helium smoke test to reproduce the smoke-filling process of the corresponding hot smoke test in the atrium studied. This study also showed how to model a hot smoke test with a t-squared fire by the corresponding helium smoke test by pre-mixing helium and artificial smoke in a mixing box.

Keywords

Atrium smoke filling helium hot smoke test sub-scale experiment smoke optical density

Get full access to this article

View all access options for this article.

References

AS 4391-1999. Smoke management systems—hot smoke test. Homebush, NSW, Australia: Standards Association of Australia, 1999, p.32.

Chow

Cui

. Experimental studies on natural smoke filling in atria. J Fire Sci2000; 18: 84–103.

US Federal Aviation Administration. Advisory circular: smoke detection, penetration, and evacuation tests and related flight manual emergency procedures. Washington, DC: US Federal Aviation Administration, 1994, p.31.

Eklund

. Generation of a buoyant plume of artificial smoke for airplane tests. Atlantic City, New Jersey: Federal Aviation Administration, Technical Center1990, p.27.

Vauquelin

. Experimental simulations of fire-induced smoke control in tunnels using an “air-helium reduced scale model”: principle, limitations, results and future. Tunn Undergr Sp Tech2008; 23: 171–178.

Vauquelin

Megret

. Smoke extraction experiments in case of fire in a tunnel. Fire Safety J2002; 37: 525–533.

Vauquelin

Michaux

Lucchesi

. Scaling laws for a buoyant release used to simulate fire-induced smoke in laboratory experiments. Fire Safety J2009; 44: 665–667.

Wang

Zhao

. Numerical study on smoke movement driven by pure helium in atria. Fire Safety J2013; 61: 45–53.

Poreh

Marshall

Regev

. Entrainment by adhered two-dimensional plumes. Fire Safety J2008; 43: 344–350.

10.

McGrattan

McDermott

Hostikka

. Fire dynamics simulator (version 5): user’s guide. Gaithersburg, MD: National Institute of Standards and Technology, 2010, p.230.

11.

Chow

Fong

Cui

. PolyU/USTC atrium: a full-scale burning facility—preliminary experiments. J Appl Fire Sci1998; 8: 229–241.

12.

Chow

Cui

. Natural smoke filling in atrium with liquid pool fires up to 1.6 MW. Build Environ2001; 36: 121–127.

13.

Quintiere

. Scaling applications in fire research. Fire Safety J1989; 15: 3–29.

14.

Chow

ACW

. Scale modelling studies on atrium smoke movement and the smoke filling process. J Fire Prot Eng1995; 7: 55–64.

15.

Chow

HHW

. Scale modeling on natural smoke filling in an atrium. Heat Transfer Eng2008; 29: 76–84.

16.

Capote

Alvear

Abreu

. Scale tests of smoke filling in large atria. Fire Technol2009; 45: 201–220.

17.

Crampton

Lougheed

. Comparison of smoke measurements with standard and non-standard systems. Ottawa, Ontario, Canada: Institute for Research in Construction, National Research Council Canada, 2004, p.30.

18.

Hyndman

Koehler

. Another look at measures of forecast accuracy. Int J Forecasting2006; 22: 679–688.

19.

Zhao

. Study of fire smoke filling in buildings by helium smoke test. Montreal, QC, Canada: Building, Civil and Environmental Engineering, Concordia University, 2012, p.166.

20.

Chow

. Determination of the smoke layer interface height for hot smoke tests in big halls. J Fire Sci2009; 27: 125–142.

21.

Bryant

. Particle image velocimetry measurements of buoyancy induced flow through a doorway. Gaithersburg, MD: National Institute of Standards and Technology, 2005, p.71.