Characterization of the heat transfer to a cask engulfed in pool fire is extremely important. Experiments are carried out on diesel pool fires of diameters 0.5, 0.7, and 1.0 m with stainless steel 304L thermal casks of different sizes. Net surface heat flux on the cask is estimated using one-dimensional inverse heat conduction problem code. Velocities of the pool fires are measured using bidirectional probe to estimate the convective heat transfer coefficient (h). The concept of adiabatic surface temperature, using plate thermometer, is applied to the pool fires and the thermal casks. By employing a mixed boundary condition (adiabatic surface temperature and h) in computational fluid dynamics package, transient temperature and heat flux of the cask are estimated. These predicted data are within 10% of the experimental results. This study demonstrates that the transient adiabatic surface temperature of the pool fire can be used to predict the behavior of the thermal cask engulfed in an open pool fire.
International Atomic Energy Agency. Regulations for the safe transport of radioactive material. Report for the International Atomic Energy Agency. IAEA Safety Standards Series no. TS-R-1, 2005, 1August2005. Vienna: International Atomic Energy Agency.
2.
KoskiJAGritzoLAKentLA. Actively cooled calorimeter measurements and environment characterization in a large pool fire. Fire Mater1996; 20(2): 69–78.
3.
BainbridgeBLKeltnerNR.Heat transfer to large objects in large pool fires. J Hazard Mater1988; 20: 21–40.
4.
KramerMAGreinerMKoskiJA. Measurements of heat transfer to a massive cylindrical calorimeter engulfed in a circular pool fire. J Heat Transf2003; 125(1): 110–117.
5.
LongenbaughRSSanchezLCMahoneyAR. Thermal response of a small scale cask-like test article to three different high temperature environments. Sandia National Laboratories Report of Federal Railroad Administration. DOT/FRA/ORA-90/01, 1990, 5February1990. Washington DC: Office of Research and Development.
6.
TuncMVenartJES. Incident radiation from an engulfing pool fire to a horizontal cylinder—part I. Fire Safety J1985; 8(2): 81–87.
7.
CuchiEPCasalJ. Modelling temperature evolution in equipment engulfed in a pool-fire. Fire Safety J1998; 30(3): 251–268.
8.
OjhaMDhimanAKGuhaKC. Simulation of thermally protected cylindrical container engulfed in fire. J Loss Prevent Proc2012; 25(2): 391–399.
9.
BejanA. Heat transfer. New York: John Wiley & Sons, Inc., 1993.
10.
BlanchatTO’HernTKearneyS. Validation experiments to determine radiation partitioning of heat flux to an object in a fully turbulent fire. P Combust Inst2009; 32(2): 2511–2518.
11.
NakosJTKeltnerNR. The radiation-convective partitioning of heat transfer to structures in large pool fires. In: ShahRK (ed.) Heat transfer phenomena in radiation, combustion, and fires, vol. 106. New York: ASME, 1989, pp. 381–387.
12.
McCaffreyBJHeskestadG. A robust bidirectional low-velocity probe for flame and fire application. Combust Flame1976; 26(1): 125–127.
13.
SchneiderMEKentLA. Measurements of gas velocities and temperatures in a large open pool fire. Fire Technol1989; 25(1): 51–80.
14.
CiroWDEddingsEGSarofimAF. Experimental and numerical investigation of transient soot buildup on a cylindrical container immersed in a jet fuel pool fire. Combust Sci Technol2006; 178(12): 2199–2218.
15.
CuchiEPCasalJLanciaA. Protection of equipment engulfed in a pool fire. J Loss Prevent Proc1996; 9(3): 231–240.
16.
NakosJT. Description of heat flux measurement methods used in hydrocarbon and propellant fuel fires at Sandia. SAND2010-7062, December2010. Albuquerque, NM: Sandia National Laboratories.
17.
WickstromU. The plate thermometer—a simple instrument for reaching harmonized fire resistance tests. SP Report 1989:03. Boras: Swedish National Testing Institute, Fire Technology.
18.
IngasonHWickstromU. Measuring incident radiant heat flux using the plate thermometer. Fire Safety J2007; 42(2): 161–166.
19.
BystromAWickstromUVeljkovicM. Use of plate thermometers for better estimate of fire development. Appl Mech Mater2011; 82: 362–367.
20.
WickstromURobbinsABakerG. The use of adiabatic surface temperature to design structures for fire exposure. J Struct Fire Eng2011; 2(1): 21–28.
21.
SudheerSPrabhuSV. Measurement of flame emissivity of hydrocarbon pool fires. Fire Technol2012; 48(2): 183–217.
Ahmadi MotlaghHAHashemabadiSH. CFD based evaluation of heat transfer coefficient from cylindrical particles. Int Commun Heat Mass2008; 35(5): 674–680.
24.
HadadYJafarpurK. Laminar forced convection heat transfer from isothermal cylinders with active ends and different aspect ratios in axial air flows. Heat Mass Transfer2011; 47(1): 9–68.
25.
GhisalbertiLKondjoyanA. Convective heat transfer coefficients between air flow and a short cylinder. Effect of air velocity and turbulence. Effect of body shape, dimensions and position in the flow. J Food Eng1999; 42(1): 33–44.
26.
RempeJLKnudsonDL. High temperature thermal properties for metals used in LWR vessels. J Nucl Mater2008; 372(2–3): 350–357.
27.
BryantRA. A comparison of gas velocity measurements in a full-scale enclosure fire. Fire Safety J2009; 44(5): 793–800.
