Combustion characteristics of polymers are affected significantly by low atmospheric pressure and oxygen concentration at high altitude. In this study, vertical downward experiments aimed at investigating these characteristics, including mass loss rate (burning rate), flame temperature, flame spread rate, and flame height for polyethylene and polymethyl methacrylate having different thicknesses were conducted at elevations of 2295 m (77.4 kPa) in Xining and 29.5 m (101.8 kPa) in Hefei, China. Experimental results showed that mass loss rate and flame temperature are proportional to the ambient pressure. Power-law progressions of flame height and flame spread rate to pressure were produced, and linear relationships between the exponents and thickness of samples were obtained. The influence of ambient pressure and thickness on flame height is similar to that on flame spread rate for polymethyl methacrylate.
WaibelRTEssenhighRH. Combustion of thermoplastic polymer particles in various oxygen atmospheres: comparison of theory and experiment. Symp (Int) Combust1973; 14: 1413–1420.
9.
BlazowskiWSColeRBMcAlevyRF. Linear pyrolysis of various polymer under combustion conditions. Symp (Int) Combust1973; 14: 1177–1186.
10.
TewarsonAJiangFHMorikawaT. Ventilation-controlled combustion of polymers. Combust Flame1993; 95: 151–169.
11.
GibowKMAbdikarimovMNZhubanovBA. The role of convected thermal energy and oxygen in the flame during the combustion of polymers. Polymer Sci1978; 20: 3013–3020.
12.
HopkinsDJrQuintiereJG. Material fire properties and predictions for thermoplastics. Fire Saf J1996; 26: 241–268.
13.
ZhangJWangYLuX. Study on melting behavior of polymers during burning. In: Fire safety science: proceedings of the eighth international symposium, international association for fire safety science. September 18-23, 2005, Beijing, China, Intl. Assoc. for Fire Safety Science, Boston, MA, GottukD. T.LattimerB. Y., Editor(s) 2005, pp.637–646.
14.
ButlerKM. A mixed layer pyrolysis model for polypropylene. In: Fire safety science: proceedings of the sixth international symposium, international association for fire safety science, 5–9 July, 1999, Poitiers, France, Intl. Assoc. for Fire Safety Science, Boston, MA, CurtatM., Editor(s) 1999, pp.313–324.
15.
StoliarovSICrowleySLyonRE. Prediction of the burning rates of non-charring polymers. Combust Flame2009; 156: 1068–1083.
16.
DelichatsiosMADelichatsiosMM. Upward flame spread and critical conditions for PE/PVC cables in a tray configuration. In: Fire safety science: proceedings of the fourth international symposium, international association for fire safety science. July 13–17, 1994, Ottawa, Canada, Intl. Assoc. for Fire Safety Science, Boston, MA, KashiwagiT., Editor(s) 1994, pp.433–444.
17.
NdubizuCCAnanthRTatemPA. Transient burning rate of a noncharring plate under a forced flow boundary layer flame. Combust Flame2005; 141: 131–148.
18.
XieQZhangHYeR. Experimental study on melting and flowing behavior of thermoplastics combustion based on a new setup with a T-shape trough. J Hazard Mater2009; 166: 1321–1325.
19.
PizzoYConsalviJLPorterieB. A transient pyrolysis model based on the B-number for gravity-assisted flame spread over thick PMMA slabs. Combust Flame2009; 156: 1856–1859.
20.
OñateERossiRIdelsohnSR. Prediction of melt flow and spread of thermoplastic objects with the particle finite element method. In: Fire safety science: Proceedings of the ninth international symposium, international association for fire safety science. September 21–26, 2008, Karlsruhe, Germany, Boston, MA, Karlsson, Editor(s)2009, pp.291–302.
21.
IdelsohnSROñateEDel PinF. A Lagrangian meshless finite element method applied to fluid-structure interaction problems. Comput Struct2003; 81:655–671.
22.
ButlerKMOhlemillerTJLinterisGT. A progress report on numerical modeling of experimental polymer melt flow behavior. In: International interflam conference, 10th proceedings. July 5–7, 2004. Organised by Interscience Communications Ltd. in association with National Institute of Standards and Technology, Building Research Establishment; National Fire Protection Association; Society of Fire Protection Engineers; and Swedish National Testing and Research Institute, Edinburgh, Scotland, Interscience Communications Ltd., London, England, 2004, pp.937–948.
23.
ButlerKMOñateEIdelsohnSR. Modeling polymer melt flow using the particle finite element method. In: International interflam conference, 11th proceedings. September 3-5, 2007, London, England, 2007, pp.929–940.
24.
ButlerKM. A model of melting and dripping thermoplastic objects in fire. In: Proceedings of the fire and materials—11th international conference. Organised by Interscience Communications Limited. 26-28 January, Interscience Communications Limited, San Francisco, CA, London, England, 2009, pp.341–352.
25.
DarabkhaniHGBassiJHuangHW. Fuel effects on diffusion flames at elevated pressures. Fuel2009; 88: 264–271.
26.
McAllisterSFernandez-PelloCUrbanD. The combined effect of pressure and oxygen concentration on piloted ignition of a solid combustible. Combust Flame2010; 157: 1753–1759.
27.
WieserDJauchPWiUiU. The influence of high altitude on fire detector test fires. Fire Saf J1997; 29: 195–204.
28.
KleinhenzJFeierIIHsuS-Y. Pressure modeling of upward flame spread and burning rates over solids in partial gravity. Combust Flame2008; 154: 637–643.
29.
JunFYuC-YRanT. The influence of low atmospheric pressure on carbon monoxide of n-heptane pool fires. J Hazard Mater2008; 154: 476–483.
30.
FangJTuRGuanJF. Influence of low air pressure on combustion characteristics and flame pulsation frequency of pool fires. Fuel2011; 90: 2760–2766.
31.
LiZHeYZhangH. Combustion characteristics of n-heptane and wood crib fires at different altitudes. Proc Combust Inst2009; 32: 2481–2488.
32.
De RisJLWuPKHeskestadG. Radiation fire modeling. Proc Combust Inst2000; 28: 2751–2759.
33.
ChenZ-BHuL-HHuoR. Flame height characteristics based on Image luminance. J Combust Sci Technol2008; 14: 557–561.
34.
AmellAA. Influence of altitude on the height of blue cone in a premixed flame. Appl Therm Eng2007; 27: 408–412.
35.
MostJ-MPhilippeMJieC. Influence of gravity and pressure on pool fire-type diffusion flames. In: Twenty-sixth symposium (international) on combustion/the combustion institute. July 28-August 2, 1996, Napoli, Italy. organised by the Combustion Institute. Combustion Institute. Pittsburgh, PA, 1996, pp.1311–1317.
36.
HottelHC. Use of models in fire research. NAS-NRC Publication Washington, DC No. 786, 1961, p.32.
37.
WilliamsFA. Scaling mass fires. Fire Res Abst Rev1969; 11: 1.
