It is very important to accurately predict the fire-induced air velocity, temperature, and smoke concentrations in tunnel fires to design efficient fire protection systems. In this study a scaled model of a tunnel was constructed based on Froude number scaling and wood sticks with different configurations which were burned in a controlled environment. Model vehicles having a square base were built according to the wood crib theory. The impact of varying longitudinal ventilation velocity and the cross-sectional area of the burning substances on the heat release rate and temperature distribution in the tunnel were measured.
BeardACarvelR. The handbook of tunnel fire safety, London, UK: Thomas Telford, 2005.
2.
U.S. Department of Transportation. Subway environmental design handbook V.1 principles and applications, 2nd ed. New York: John Wiley, 1976.
3.
Lönnermark A. On the characteristics of fires in tunnels. PhD Thesis, Lund University, 2005.
4.
RohJSYangSSRyouHSYoonMOJeongYT. An experimental study on the ventilation velocity on burning rate in tunnel fires–heptane pool fire case. Build Environ2008; 43: 1225–1231.
5.
IngasonH. Model scale railcar fire tests. Fire Safety J2007; 42: 271–282.
6.
CarvelROBeardANJowittPWDrysdaleDD. The influence of tunnel geometry and ventilation on the heat release rate of fire. Fire Technol2004; 40: 5–26.
7.
Musluoğlu E. A theoretical analysis of fire development and flame spread in underground trains. PhD Thesis, Mechanical Engineering Department, Middle East Technical University, 2009.
8.
ParkerWJ. Calculations of the heat release rate by oxygen consumption for various applications. J Fire Sci1984; 2(5): 380–395.
9.
QuintiereJG. Scaling applications in fire research. Fire Safety J1989; 15: 3–29.
10.
Kayılı S. Effect of vehicles’ blockage on heat release rate in case of tunnel fire. PhD Thesis, Mechanical Engineering Department, Middle East Technical University, 2009.
11.
McGrattanKMcDermottRHostikkaSFloydJ. Fire dynamics simulator (version 5.5.3)—user's guide, Maryland: National Institute of Standards and Technology, 2007.
