Two series of experiments were conducted to determine the burning characteristics of different fuel packages, in both pre- and post-flashover fires, to develop data to characterize design fires for commercial premises. These fuel packages represented fuel loads determined from the survey of commercial buildings. Results suggest substantial differences in the burning characteristics of different stores. In this article, the description of the recommended design fires includes: (1) types of combustibles, (2) fire load density (MJ/m 2), (3) fire growth rate, and (4) yields of CO and CO2.
Sfpe (2000). Engineering Guide to Performance-based Fire Protection, Analysis and Design of Buildings, Society of Fire Protection Engineers and National Fire Protection Association , Quincy, MA.
2.
Zalok, E. , Hadjisophocleous, G. and Mehaffey, J.R. (2009). Fire Loads in Commercial Premises , Journal of Fire and Materials, 33: 63-78.
3.
Hadjisophocleous, G. and Zalok, E. (2003). A Survey of Fire Loads on Commercial Floors of Office Buildings , In: 4th International Seminar on Fire and Explosion Hazards, Londonderry, Northern Ireland, pp. 493-503.
4.
Hadjisophocleous, G. and Zalok, E. (2004). Development of Design Fires for Commercial Buildings , In: Fire Safety Engineering Conference: Issues and Solutions , Sydney , Australia, pp. 1-14.
5.
Hadjisophocleous, G. and Zalok, E. (2004). Fire Loads and Design Fires For Commercial Buildings Interflam 2004 , In: 10th International Fire Science and Engineering Conference, Scotland, UK, pp. 435-446.
6.
Bennetts, I.D. , Poh, K.W. , Poon, S.L. , Thomas, I.R. , Lee, A.C. , Beever, P.F. , Ramsay, G.C. and Timms, G.R. (2001). Fire Safety in Shopping Centres, Fire Code Reform Research Program, Project 6, Final Project Report and Supplement, p. 156, app. p. 77.
7.
Yung, D. , Wade, C. and Fleischmann, C. (2004). Development of Design Fires for Buildings , In: Fire Safety Engineering Conference: Issues and Solutions , Sydney, Australia, pp. 1-12.
8.
Thomas, I. and Bennetts, I. (2004). The Development of Design Fires for Buildings , In: Fire Safety Engineering Conference: Issues and Solutions, Sydney, Australia, pp. 1-17.
9.
Bennett, I.D. , Culton, M. , Dickerson, M.L. , Lewins, R. , Poh, K.W. , Peon, S.L. , Ralph, R. , Lee, C. , Beever, F. , Cooper, J. , Haggar, P.I. , Moore, I.P. , Ramsay, G.C. and Timms, G.R. (1997). Simulated Shopping Centre Fire Tests, FCRC Project 6, BHPR/SM/R/G/062, Broken Hill Proprietary Company, Ltd, VIC, Australia, p. 186.
10.
Department of Consumer Affairs, Bureau of Home Furnishings and Thermal Insulation (1992). Flammability Test Procedure for Seating Furniture for Mattresses for Use in Public Buildings , Technical Bulletin 129, State of California.
11.
ISO9705 (1993). Fire Tests-full-scale Room Test for Surface Products, International Organization for Standardisation, Genève , Switzerland.
12.
Janssens, M.L. (1991). Measuring Rate of Heat Release by Oxygen Consumption , Fire Technology, 27: 234-249.
13.
Zalok, E. (2006). Design Fire for Commercial Premises, PhD Dissertation, Department of Civil and Environmental Engineering, Carleton University, Canada. p. 258.
14.
Tewarson, A. (2002). Chapter 4 Generation of Heat and Chemical Compounds in Fires , The SFPE Handbook of Fire Protection Engineering, 3rd edn, Section 3, pp. 3-161, The National Fire Protection Association Press, Quincy, MA.
