Solid Waste Disposal in China-Situation,Problems and Suggestions

Abstract

This paper investigates the current situation of municipal and industrial solid waste disposal in China. Recent Chinese literature about solid waste disposal in China has been reviewed and data analysed on the total amount of solid wastes generated and compositional variations over the last ten years in the city of Wuhan. The results show a rapid increase in the total amount of municipal solid wastes and significant composition changes. These are related to the increased population in China and the enhanced living standards in the last years. In Wuhan City, for example, the total amount of municipal solid wastes increased from 1.19 million tonnes in 1985 to 1.50 million tonnes in 1993, and is estimated to reach 2 million tonnes in 2000. Until now large amounts of municipal solid wastes in many cities in China were transported to the suburban districts and dumped into the low-lying land directly without any controlled disposal.

The total amount of industrial solid waste in China was about 580 million tonnes in 1990. Until 1990, about 6.5 billion tonnes industrial waste was stockpiled in China, occupying an area of 58 692 hectares, of which 4060 hectares is potential farming land. The total amount of industrial solid waste in Wuhan was 5.6 million tonnes in 1992, in which 5.0 million tonnes was recycled, 30 000 tonnes was treated physically or chemically and finally disposed, 0.31 million tonnes was deposited near the plant, and 0.26 million tonnes was discharged into rivers, lakes and seas. Although the rate of recycling is very high (89%), this is mainly due to the re-use of some kinds of wastes like fly-ash, slag, coal spoil. The amount of the stockpiled and discharged wastes, especially hazardous wastes which cause considerable pollution in China, is still very large. To overcome existing solid waste management problems in China, some measures are suggested in this paper. © 1997 ISWA

Keywords

Solid waste management China Wuhan City municipal solid waste industrial solid waste quantity composition treatment disposal prob lems suggestions.

Get full access to this article

View all access options for this article.

References

Diaz, L.F. & Glolueke, C.G. (1986) Resource recovery: imperative for developing nations. In: K. J. Thomé-Kozmiensky (ed.) Waste Management in Developing Countries 1, EF-Verlag für Energie- und Umwelttechnik GmbH, Berlin, Germany.

Gao, J.X. (1994) Ecological engineering treatment of urban refuse and its applying prospects m China. Research of Environmental Science, 7(4), 59-61 (in Chinese).

Gao, S. & Zhang, H.Q. (1994) Study on the pollution control of industrial solid waste in China. Research of Environmental Science, 7(1), 43-47 (in Chinese).

Hackl, A.E. (1995) Abfallentsorgung in Österreich. Entsorgungspraxis, 6, 86-91 (in German).

Li, Z.Y. (1991) Status quo and technical strategy for solid waste treatment in China's chemical industry. Modern Chemical Engineering , 3, 8-12 (in Chinese).

Mu, C.H. (1993) Waste management. Environmental Engineering, 1, 14-17 (m Chinese).

Müller, H. & Baumann, D. (1990) Aufbereitungstechnologie zur Abfallverwertung. In: K. J. Thomé-Kozmiensky (ed.) Müllverbrennung und Umwelt, EF-Verlage, Berlm, Germany (in German).

Tchobanoglous, G. , Theisen, H. & Vigil, S. (1993) Integrated solid waste management engineering principles and management issues. New York, U.S.A., McGraw-Hill, Inc., p. 978.

Yu, K. (1991) The world's attention on solid waste problems. Chemical Engineering Advance, 6, 14-17 (in Chinese).

10.

Zhang, J.G. (1994) Present situation and future reduction strategy of municipal refuse in China. Research of Environmental Science , 7(6), 42-45 (in Chinese).

11.

Zhang, S. & Herbell, J.-D. (1996) Abfallwirtschaft in der Volksrepublik China, Teil 1: Abfallentsorgung in Wuhan. Report of Department of Mechanical Engineering, Gerhard-Mercator University , Duisburg, Germany (in German).