Lithium iron phosphate (LFP) batteries contain metals, toxic electrolytes, organic chemicals and plastics that can lead to serious safety and environmental problems when they are improperly disposed of. The published literature on recovering spent LFP batteries mainly focuses on policy-making and conceptual design. The production line of recovering spent LFP batteries and its detailed operation are rarely reported. A set of automatic line without negative impact to the environment for recycling spent LFP batteries at industrial scale was investigated in this study. It includes crushing, pneumatic separation, sieving, and poison gas treatment processes. The optimum retaining time of materials in the crusher is 3 minutes. The release rate is the highest when the load of the impact crusher is 800 g. An air current separator (ACS) was designed to separate LFP from aluminium (Al) foil and LFP powder mixture. Movement behaviour of LFP powder and Al foil in the ACS were analysed, and the optimized operation parameter (35.46 m/s) of air current speed was obtained through theoretical analysis and experiments. The weight contents of an Al foil powder collector from vibrating screen-3 and LFP powder collector from bag-type dust collector are approximately 38.7% and 52.4%, respectively. The economic cost of full manual dismantling is higher than the recovery production line. This recycling system provides a feasible method for recycling spent LFP batteries.
AbeKMatsumoriYUekiA (2009) Nonaqueous electrolytic solution and lithium secondary batteries. U.S. patents 7615316.
2.
BiHZhuHZuL, et al. (2020) Environment-friendly technology for recovering cathode materials from spent lithium iron phosphate batteries. Waste Management & Research38: 911–920.
3.
CaoCMSunSDingR, et al. (2017) Experimental study on mechanical characteristics of nut rupturing under impact loading. International Journal of Agricultural and Biological Engineering10: 53–60.
4.
Centers for Disease Control and Prevention-National Institute for Occupational Safety and Health (2003) Pocket Guide to Chemical Hazards. Washington, DC: National Institute for Occupational Safety and Health (NIOSH). Available at: http://www.cdc.gov/nios/npg/npgd0619.html (accessed 13 September 2015).
5.
CuiJForssbergE (2003) Mechanical recycling of waste electric and electronic equipment: A review. Journal of Hazardous Materials99: 243–263.
6.
ForteFPietrantonioMPucciarmatiS, et al. (2020) Lithium iron phosphate batteries recycling: An assessment of current status. Critical Reviews in Environmental Science and Technology. Epub ahead of print 11June2020. DOI: 10.1080/10643389.2020.1776053.
7.
Georgi-MaschlerTFriedrichBWeyheR, et al. (2012) Development of a recycling process for Li-ion batteries. Journal of Power Sources207: 173–182.
8.
GuFGuoJYaoX, et al. (2017) An investigation of the current status of recycling spent lithium-ion batteries from consumer electronics in China. Journal of Cleaner Production161: 765–780.
9.
HeKZhangZAlaiL, et al. (2019) A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries. Journal of Cleaner Production375: 43–51.
10.
HuangKLiJXuZ (2011) Enhancement of the recycling of waste Ni-Cd and Ni-MH batteries by mechanical treatment. Waste Management31: 1292–1299.
11.
HuangZRuanJYuanZ, et al. (2018) Characterization of the materials in waste power banks and the green recovery process. ACS Sustainable Chemistry & Engineering6: 3815–3822.
12.
HuangZZhuJQiuR, et al. (2019) A cleaner and energy-saving technology of vacuum step-by-step reduction for recovering cobalt and nickel from spent lithium-ion batteries. Journal of Cleaner Production229: 1148–1157.
13.
KalluriSYoonMJoM, et al. (2017) Feasibility of cathode surface coating technology for high-energy lithium-ion and beyond-lithium-ion batteries. Advanced Materials29: 1605807.
14.
KangSWGuXJ (2012) Electrolyte additive for protecting lithium cell from overcharge and over discharge. P.R.C patents 102655241.
15.
LiJXuZ (2010) Environmental friendly automatic line for recovering metal from waste printed circuit boards. Environmental Science and Technology44: 1418–1423.
16.
LiJHuangYChenZ, et al. (2019) Characterizations of macroscopic deformation and particle crushing of crushed gangue particle material under cyclic loading: In solid backfilling coal mining. Powder Technology343: 159–169.
17.
LiJLuHGuoJ, et al. (2007) Recycle technology for recovering resources and products from waste printed circuit boards. Environmental Science and Technology41: 1995–2000.
18.
LiJWangGXuZ (2016) Generation and detection of metal ions and volatile organic compounds (VOCs) emissions from the pretreatment processes for recycling spent lithium-ion batteries. Waste Management52: 221–227.
19.
LiuTHuXLiSE, et al. (2017a) Reinforcement learning optimized look-ahead energy management of a parallel hybrid electric vehicle. IEEE/ASME Transactions on Mechatronics22: 1497–1507.
20.
LiuYTaiZZhouT, et al. (2017b) An all-integrated anode via interlinked chemical bonding between double-shelled–yolk-structured silicon and binder for lithium-ion batteries. Advanced Materials29: 1703028.
21.
MengQZhangYDongP (2018a) Use of electrochemical cathode-reduction method for leaching of cobalt from spent lithium-ion batteries. Journal of Cleaner Production180: 64–70.
22.
MengXCaoHHaoJ, et al. (2018b) Sustainable preparation of LiNi1/3Co1/3Mn1/3O2–V2O5 cathode materials by recycling waste materials of spent lithium-ion battery and vanadium-bearing slag. ACS Sustainable Chemistry & Engineering6: 5797–5805.
23.
NesterenkoAVLeshchenkoSMVasylkovskyiOM (2017) Analytical assessment of the pneumatic separation quality in the process of grain multilayer feeding. INMATEH-Agricultural Engineering 53: 65–70.
24.
OmarHMRohaniS (2015) Treatment of landfill waste, leachate and landfill gas: A review. Frontiers of Chemical Science and Engineering9: 15–32.
25.
RuanJXuZ (2011) Environmental friendly automated line for recovering the cabinet of waste refrigerator. Waste Management31: 2319–2326.
26.
RuanJXuZ (2016) Constructing environment-friendly return road of metals from e-waste: Combination of physical separation technologies. Renewable & Sustainable Energy Reviews54: 745–760.
27.
RuanJLiJXuZ (2013) Improvements of the recovery line of waste toner cartridges on environmental and safety performances. Environmental Science and Technology47: 6457–6462.
28.
RuanJXueMXuZ (2012) Risks in the physical recovery system of waste refrigerator cabinets and the controlling measure. Environmental Science and Technology46: 13386–13392.
29.
SilveiraAVSantanaMPTanabeEH, et al. (2017) Recovery of valuable materials from spent lithium ion batteries using electrostatic separation. International Journal of Mineral Processing169: 91–98.
30.
SongWLiuJYouL, et al. (2019) Re-synthesis of nano-structured LiFePO4/graphene composite derived from spent lithium-ion battery for booming electric vehicle application. Journal of Power Sources419: 192–202.
31.
WangJTianBBaoY, et al. (2018) Functional exploration of extracellular polymeric substances (EPS) in the bioleaching of obsolete electric vehicle LiNixCoyMn1-x-yO2 Li-ion batteries. Journal of Hazardous Materials354: 250–257.
32.
WangWWuY (2017) An overview of recycling and treatment of spent LiFePO4 batteries in China. Resources, Conservation and Recycling127: 233–243.
33.
WangJTianBBaoY, et al. (2018a) Functional exploration of extracellular polymeric substances (EPS) in the bioleaching of obsolete electric vehicle LiNixCoyMn1-x-yO2 Li-ion batteries. Journal of Hazardous Materials354: 250–257.
34.
WangFZhangTHeY, et al. (2018b) Recovery of valuable materials from spent lithium-ion batteries by mechanical separation and thermal treatment. Journal of Cleaner Production185: 646–652.
35.
WatanabeMThomasMLZhangS, et al. (2017) Application of ionic liquids to energy storage and conversion materials and devices. Chemistry Reviews117: 7190–7239.
36.
WuXHuXMouraSJ, et al. (2016) Stochastic control of smart home energy management with plug-in electric vehicle battery energy storage and photovoltaic array. Journal of Power Sources333: 203–212.
37.
WuschkeLJackelHDLeisnerT, et al. (2019) Crushing of large Li-ion battery cells. Waste Management85: 317–326.
38.
XuYPangXMaZF (2013) Electrolyte for flexible-package lithium ion secondary batteries and battery with electrolyte. P.R.C. patents 103022559.
39.
XueMXuZ (2013) Computer simulation of the pneumatic separator in the pneumatic–electrostatic separation system for recycling waste printed circuit boards with electronic components. Environmental Science and Technology47: 4598–4604.
40.
XueMLiJXuZ (2012) Environmental friendly crush-magnetic separation technology for recycling metal-plated plastics from end-of-life vehicles. Environmental Science & Technology46: 2661–2667.
41.
YuanZRuanJLiY, et al. (2018) A new model for simulating microbial cyanide production and optimizing the medium parameters for recovering precious metals from waste printed circuit boards. Journal of Hazardous Materials353: 135–141.
42.
ZhanLXuZ (2014) Assessment of heavy metals exposure, noise and thermal safety in the ambiance of a vacuum metallurgy separation system for recycling heavy metals from crushed e-wastes. Waste Management & Research32: 1247–1253.
43.
ZhangTHeYWangF, et al. (2014) Chemical and process mineralogical characterizations of spent lithium-ion batteries: An approach by multi-analytical techniques. Waste Management34: 1051–1058.
44.
ZhangXCaoHXieY, et al. (2015) A closed-loop process for recycling LiNi1/3Co1/3Mn1/3O2 from the cathode scraps of lithium-ion batteries: Process optimization and kinetics analysis. Separation and Purification Technology150: 186–195.
45.
ZhangXBianYXuS, et al. (2018a) Innovative application of acid leaching to regenerate Li (Ni1/3Co1/3Mn1/3) O2 cathodes from spent lithium-ion batteries. ACS Sustainable Chemistry & Engineering6: 5959–5968.
46.
ZhangJHuJZhangW, et al. (2018b) Efficient and economical recovery of lithium, cobalt, nickel, manganese from cathode scrap of spent lithium-ion batteries. Journal of Cleaner Production204: 437–446.
47.
ZhaoMLiJYuK, et al. (2006) Measurement of pyrolysis contamination during crushing of waste printed circuit boards. Journal Tsinghua University46: 1995.
48.
ZhaoZDasSXingG, et al. (2018) A 3D organically synthesized porous carbon material for lithium-ion batteries. Angewandte Chemie, International Edition57: 11952–11956.
49.
ZhongXLiuWHanJ, et al. (2020) Pneumatic separation for crushed spent lithium-ion batteries. Waste Management118: 331–340.
50.
ZouHGratzEApelianD, et al. (2013) A novel method to recycle mixed cathode materials for lithium ion batteries. Green Chemistry15: 1183–1191.
51.
ZhouLXuZ (2012) Response to waste electrical and electronic equipments in China: Legislation, recycling system, and advanced integrated process. Environmental Science and Technology46: 4713–4724.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
