Environmentally friendly process instead of cyanide leaching on recycling of gold and silver from jewellery scraps and wastes

Abstract

Nowadays, the production and exploration of gold has an increased importance all over the world. Recycling is a significant source for the supply of gold and has a pronounced effect on its price. The flotation method, which is more economical and more environmentally friendly than cyanide leaching, has been investigated for recycling gold and silver from jewellery slag. A jewellery slag sample containing 28.3 ppm Au and 42.0 ppm Ag was obtained from a refinery in Turkey. Flotation concentrate assaying 614.6 ppm Au and 511 ppm Ag was achieved with recoveries of 89.0% and 83.2%, respectively. On the other hand, 87.8% Au and 81.5% Ag extractions were obtained by cyanide leaching tests. Based on these results, flotation is suggested, considering its environmental and economic benefits.

Keywords

Jewellery scrap jewellery waste precious metal recycling gold silver flotation leaching

Get full access to this article

View all access options for this article.

References

Aerofloat 242 Promoter, MSDS No. 000038, Cytec Industries Inc, New Jersey, January 7, 2005.

Aerophine 3418A Promoter, MSDS No. 1787, Cytec Industries Inc, New Jersey, October 14, 1997.

Aksoy

Yarar

(1989) Processing of Complex Ore. In: Dobby

Rao

(eds), Natural hydrophobicity of native gold flakes and their flotation under different conditions, New York: Pergamon Press, pp.19–27.

Bach

Nørregaard

Hansen

, et al. (2016) Review on environmental risk assessment of mining chemicals used for mineral separation in the mineral resources industry and recommendations for Greenland. Aarhus University, DCE – Danish Centre for Environment and Energy, 34 pp. Scientific Report from DCE – Danish Centre for Environment and Energy No. 203.

Botz

Mudder

Akcil

(2005) Cyanide treatment: physical, chemical and biological processes. In: Adams

(Ed.), Advances in Gold Ore Processing, Chapter 15 . Amsterdam: Elsevier Ltd., pp. 672–700.

Brüger

Fafilek

Restrepo

BOJ

, et al. (2018) On the volatilisation and decomposition of cyanide contaminations from gold mining. Science of the Total Environment 627:1167–1173.

Bulatovic

(1997) Flotation behaviour of gold during processing of porphyry copper-gold ores and refractory gold bearing sulfides. Minerals Engineering 10(9):895–908.

Burat

Ozer

(2018) Physical separation route for printed circuit boards (PCBs). Physicochemical Problems of Mineral Processing 54(2):554–566.

Burat

Basturkcu

Ozer

(2019) Gold & silver recovery from jewelry waste with combination of physical and physicochemical methods. Waste Management 89:10–20.

10.

Canda

Heput

Ardelean

(2016) Methods for recovering precious metal from industrial waste. IOP Conference Series: Materials Science and Engineering, 3–5 June 2015, Wuhan, China, 106.

11.

Chielewski

Urbanski

Migdal

(1997) Separation Technologies for Metals Recovery from Industrial Wastes. Hydrometallurgy 45:333–344.

12.

Corti

(2002) Recovery and Refining of Gold Jewellery Scrap and Wastes. The Santa Fe Symposium on Jewelery Manufacturing Technology. New Mexico: Albuquerque, pp. 111–130.

13.

Crawford

Hartung

Hollert

, et al. (2017) Green Toxicology: a strategy for sustainable chemical and material development. Environmental Sciences Europe 29(16):2–16.

14.

Cui

Zhang

(2008) Metallurgical recovery of metals from electronic waste: a review. Journal of Hazardous Material 158:228–256.

15.

Cyanide Code Audit Summary Audit Report, (2018). Project no: 0446872. Available at: https://www.cyanidecode.org/sites/default/files/pdf/BarrickVeladeroSAR2018.pdf (accessed 17 April 2020).

16.

Cyanide Management (2008) Leading Practice Sustainable Development Program for the Mining Industry. Available at: https://www.industry.gov.au/sites/default/files/2019-04/lpsdp-cyanide-management-handbook-english.pdf (accessed 17 April 2020).

17.

Cytec (2010) Flotation Reagent Fundamentals. Mining Chemical Handbook.

18.

Delfini

Manni

Massacci

(2000) Gold recovery from jewellery waste. Minerals Engineering 13(6):663–666.

19.

Durmaz

(2012) Recovery of Gold from Jewellery Based Slags by Physical Beneficiation Processes. Master Thesis, Istanbul Technical University, Istanbul, Turkey. Available at: https://polen.itu.edu.tr/handle/11527/9229.

20.

ECHA (2015) Guidance on Information Requirements and Chemical Safety Assessment Chapter R.7a: Endpoint specific guidance Version 4. 1 October 2015.

21.

Erdem

(2006) Optimization of Recycling and Refining Process from Secondary Gold Sources. Master Thesis, Istanbul Technical University, Istanbul, Turkey. Available at: https://polen.itu.edu.tr/handle/11527/9419.

22.

Fleming

(1992) Hydrometallurgy of precious metals recovery. Hydrometallurgy 30:127–162.

23.

Fricker

(1993) Recovery of cyanide in the extraction of gold. Journal of Cleaner Production 1:77–80.

24.

Jha

Lee

Kumari

, et al. (2011) Pressure leaching of metals from waste printed circuit boards using sulphuric acid. Journal of the Minerals, Metals and Materials Society 63:29–32.

25.

Knipe

Chryssoulis

Clements

(2004) Flakey gold: Problems with recovery and mineralogical quantification. Journal of the Minerals, Metals and Materials Society 56:58–62.

26.

Kuzugüdenli

ÖE

Kantar

(1999) Alternates to Gold Recovery by Cyanide Leaching. Erciyes University Journal of Institute Scientific and Technology 15:119–127.

27.

Laitos

(2013) Cyanide, Mining, and the Environment, 30 Pace Envtl. L. Rev. 869. Available at: http://digitalcommons.pace.edu/pelr/vol30/iss3/2 (accessed 17 April 2020).

28.

Loewen

(1982) The Recovery of Gold from Jewellery Sweeps. Project report 44/2, The Worshipful Company of Goldsmiths London.

29.

Loewen

(1995) Small Scale Refining of Jeweller’s Wastes. Met-Chem Research Inc.

30.

Marsden

House

(1992) The Chemistry of Gold Extraction. Chichester: Ellis-Horwood.

31.

Marsden

House

(2006) The Chemistry of Gold Extraction. Littleton, CO: SME.

32.

Mohammadnejad

Provis

Deventer

JSJ

(2011) Gold Sorption by Silicates in Acidic and Alkaline Chloride Media. International Journal of Mineral Processing 100:149–156.

33.

Mudder

Botz

(2004) Cyanide and society: a critical review. The European Journal of Mineral Processing and Environmental Protection 4:62–74.

34.

Patil

(2014) Review of Green Chemical Technologies for Sustainable Developments in Chemical Process Industries. Journal of Current Trends in Chemical Engineering 2(2):1–7.

35.

Petersen

Van Deventer

JSJ

(1997) The behaviour of silica in gold cyanide solutions. International Journal of Mineral Processing 50(3):211–225.

36.

Potgieter

Mbaya

RKK

, et al. (2004) Small-Scale Recovery of Noble Metals from Jewellery Wastes. The Journal of the South African Institue of Mining and Metallurgy 563–572.

37.

Rhee

Lee

, et al. (1995) A recovery of gold from electronic scrap by mechanical separation, acid leaching and electrowinning. In: Queneau

Peterson

(eds), Recycling Metals and Engineered Materials. TMS Publication , pp. 469–478.

38.

Syed

(2012) Recovery of gold from secondary sources—A review. Hydrometallurgy 115–116:30–51.

39.

Thammaraksa

Wattanawan

Prapaspongsa

(2017) Corporate environmental assessment of a large jewelry company: From a life cycle assessment to green industry. Journal of Cleaner Production 164:485–494.

40.

Trapp

Larsen

Pirandello

, et al. (2003) Feasibility of cyanide elimination using plants. The European Journal of Mineral Processing and Environmental Protection 3:128–137.

41.

Tundela

(2015) Eco-Friendly Technology-Key for Sustainable Development. Social Issues and Environmental Problems 3(9):1–3.

42.

World Gold Council (2018) Gold Supply. Available at: https://www.gold.org/about-gold/gold-supply (accessed 29 October 2018).

43.

World Gold Council (2019a) Gold Demand Trends Full Year 2019. Available at: https://www.gold.org/goldhub/research/gold-demand-trends/gold-demand-trends-full-year2019 (accessed 16 April 2020).

44.

World Gold Council (2019b) Gold Demand Trends Full year and Q4 2019. Available at: https://www.gold.org/goldhub/research/gold-demand-trends/gold-demand-trends-full-year2019/jewellery (accessed 16 April 2020).

45.

Yap

Mohamed

(2007) An electro-generative process for the recovery of gold from cyanide solutions. Chemosphere 67:1502–1510.